Precision temperature meters

- -200°C to 2315°C

- The TTI-7 PLUS is a very high accuracy multi purpose digital thermometer for both platinum resistance thermometers and thermocouples.

- Accepts 25 and 100 Ohm Resistance Thermometers - Conversion to ITS-90 and IEC 751

- Eliminate unwanted thermal EMFs with current reversal

- Expandable to have 10 input channels

- Inbuilt data logger stores up to 4000 measurements

- Portable - 10 hours use from internal battery

- -250°C to 962°C

- Quite simply the Isotech TTI-22 High Accuracy Thermometer sets new standards in the price to performance ratio for industrial and secondary resistance thermometry.

- Accuracy of 0.001°C and a resolution of 0.0001°C (0.00004 Ohms)

- A reference thermometer for your PRT or SPRT Standards

- For use in the lab or to achieve the highest accuracy in the field

- -200°C to 850°C

- TTI-10 brings laboratory level performance of up to 10mK (0.01°C) and resolution up to 0.001°C in a portable handheld instrument.

- High Accuracy Handheld Thermometer

- High Resolution, to 0.001°C

- Perfect Standard for use with Isocal-6, Fast-Cal & Dry Blocks

- Our TTI range use high quality ‘Lemo’ connectors for the Pt100 inputs. This simple accessory provides 4mm Terminal Posts for the connection of bare wires, spade terminals or 4mm plugs - useful if a lot of probes are going to be used with the instrument.

- Time Saving

- Accepts Bare Wire, Spades or Banana Plugs

- Suits a wide range of Isotech instruments

- 30°C to 350°C

- The fundamental problem with surface temperature measurement is that it is subject to large stem conduction errors, also because heat conducted from the surface of the hot-plate causes a localised cold spot to be created which means that the temperature indicated by the hot plate is not necessarily the temperature at the point of measurement.

- Indicates True Surface Temperature

- 30°C to 350°C

- Resolution 0.1°C

- Isotech produces a miniature resistor with ultra-low temperature coefficient and ultra-high stability. This is achieved because the resistors are oil filled and hermetically sealed.

- Wide range of Values

- Oil Filled

- Precise and Stable for Industrial References

- -270°C to 1820°C

- The milliK Precision Thermometer from Isotech sets a new standard for the high accuracy measurement and calibration of Platinum Resistance Thermometers, Thermistors, Thermocouple and Process Instrumentation (4-20mA) over the range -270°C to 1820°C.

- Wide Range of Sensors, SPRTs, PRTs, Thermistors, Thermocouples and 4-20mA Transmitters

- High Accuracy, < ±5ppm for PRTs, ±2µV for Thermocouples and ±1µA for Transmitters

- Logs and Controls Isotech Temperature Sources Massive logging capacity - supports Dry Blocks and Liquid Baths

- Measure and calibrate SPRTs, RTDs, thermistors and TC

- 1 PPM resistance ratio accuracy (channel 1)

- 8 1/2-digit DC multimeter

- Measure up to 82 channels

- Auto temperature control of Additel and other manufacture's heat sources

- Reference Level Accuracies

- Dual Measurement Channels

- Smart Style Probe Connections

- Differential Measurement Technology

- Built-in Sensor Library

- Isotech produces two eight way selector switches, one for resistance thermometers Model 954 and Model 958 for thermocouples.

- Eight Channel - Local and RS232 Control

- PRT and Thermocouple Models

- Use with Isotech TTIs and Automation Software