Accessories

-Type: Naturally ventilated

Probe diameter: Ø 15; Ø 25

Number of plates: 9;10;21

Dimension: Ø 130 x 140 mm; Ø 130 x 160 mm; Ø 130 x 215 mm

Compatible probes: HC2A-(S)3; MP100A/400A; MP102H/402H

-Type: Service Cable

Used: For programming (setting, scaling, firmware update). Requires HW4/HW5

Range of application: -40…70 °C

Cable Length: 1.8m/3.6m

Connector A Side: USB

- For Use with Easidew I.S. and Easidew PRO I.S.

- Features

-

- Loop powered 4-20mA indicator. Intrinsically safe certified with ATEX, IECEx, and FM

- Operating temperature between -40 and +70°C

- Bold 34mm high 4-digit display with optional backlight

- Robust GRP enclosure providing IP66 protection. Can be mounted by itself or inside a sampling system enclosure

- Built-in terminal compartment for easy wiring

- Two optional galvanically isolated solid-state alarm outputs

-Downloading log data from the data loggers: the formats .xls, .csv and .log are available for log files.

Instrument configuration

Analysis and calculation tool Psychrometric parameters The statistical function and integrated PDF report enable simple and detailed data evaluation for this.

Supported operating systems: Windows 10

-Steel 1.4301, Sintered steel, Polycarbonate filter carrier

Polyethylene filter: 40-50µm, -50…100 °C; 20µm, -50…100 °C; 40µm, -50…100 °C

wire mesh filter: 10µm, -50…100 °C; 10µ, -100…200 °C; 20…25µm, -100…200 °C

Sintered steel filter: 25µm, -100…200 °C; 25µm, -100…200 °C

Teflon filter: 10µm, -80…200 °C

-Type: Extension Cable for Humidity Probes; for analog Humidity Probe; Service cable for UART to USB; USB adapter

Cable length: 30 cm; 1 m; 1.8 m or 3.6 m; 2.8 m

Range of application: -40…90 °C; -40…70 °C; -10°C…+80°C

-Type: Passiv extension cable / Active extension cable

Used To expand the lenght between a HC2(A) probe and: a transmitter, hanheld or datalogger; the electronics; the electronics wide supply voltage.

Range of Application: -40…90 °C/ -40…70 °C

Available Length: 1/2/5m

- Self-contained service tool

- Features

-

- Simple to use: connects to a PC via USB

- No additional power source required: transmitters are powered via USB from the PC

- Application software is included and supports all Michell Pura and Easidew dew-point transmitters

- Digitally display moisture and temperature readings

- Reconfigure transmitter output units, range and fault settings

-Type: Active extension cable/MODBUS Converter/USB Converter

USED: To expand the lenght between a HC2(A) probe and a transmitter, handheld or datalogger up to 100m;

Converts the HC2(A) UART to MODBUS signal;

Converts the HC2(A) UART to USB signal;

Range of Application: -40…70 °C

Available Length: 10/20/50/100 m; 5 m; 2.8 m