Brief specifications
More details
The HC2-A extension cables extend the HC2-A probes away from transmitters, handheld instruments or data loggers and data loggers. The HC2-A extension cables can be used up to 5 meters.
Extension Cables for Rotronic Humidity Probes HC2-A and HC2
-Type: Extension Cable for Humidity Probes; for analog Humidity Probe; Service cable for UART to USB; USB adapter
Cable length: 30 cm; 1 m; 1.8 m or 3.6 m; 2.8 m
Range of application: -40…90 °C; -40…70 °C; -10°C…+80°C
Foto
Options / Accessories
Description
Featured Products
The S8000 precision hygrometer provides a direct measurement of dew point, temperature and pressure. Suitable for both industrial and laboratory applications, the instrument is compact and self-contained.
Dew-point measurement is based on ...
HygroPalm HP31
Ideal handheld instrument for humidity and temperature measurement in simple applications. The integrated Hygromer IN-1 sensor guarantees accurate measuring results.
HygroPalm - HP32 - Versatile Handheld Instrument...
The Oceanus-6 PLUS has all the advantages of the Isocal-6 models but with a substantially larger calibration volume, 50mm diameter by 300mm deep. The Oceanus-6 can be used as a Dry Block, a Liquid Bath, a Blackbody Source for infrared therm...
An economical solution for low-pressure applications, we offer three cylinder hand pump options with a modular design that makes field maintenance quick and easy. Our DP0V model provides reliable test pressure up to 125 psi (860 kPa), the D...
Operate confidently in cold environments, even as low as -29°C. The ruggedly designed Model 786 takes laboratory level performance into the harshest of environments.
Unlike other calibrators that cannot be used in the extreme cold, the 7...
Guildline Instruments 6636 Series is a modular series of Temperature Stabilized Resistance Standards that can be rack mounted or simply set on a bench. The 6636 Series provides a logical extension to the popular 6634A series of Temperature ...
The ADTS552F air data test set is a portable two-channel flightline pitot static tester with large pitot static volume capability for use on a wide range of aircraft, from light aircraft to wide body passenger and freight aircraft. It provi...
Whilst heat pipe furnaces offer the ideal environment to melt and freeze ITS-90 Fixed Points the temperature range is limited by fluid that flows inside the pipe. Three zone furnaces can offer wider operating ranges and still meet the requi...
GUILDLINE’S NEW 6640T SERIES OF TEMPERATURE BRIDGES are redesigned to provide better uncertainties, faster measurement rates and more operational capability. PRODUCT FEATURES Best Accuracy: ± 0.015 ppm with 1 mA of Current Linearity: < ± 0....
A protective carrying case with shoulder strap and large pocket for accessories. Also accommodates the assembled system including the DPI620G and PM620...
If you have a large number of sensors to calibrate then this economically priced stirred liquid bath is the solution. The 820 bath has been introduced to provide a liquid calibration bath with a large volume. This is to allow the bath to be...
GUILDLINE INSTRUMENTS provides two series of the best performing, most compact, wide-band AC current shunts that are commercially available PRODUCT FEATURES High Current Values to 100 A AC/DC Difference Essentially Zero at Power Frequencies...
The Isotech Model 915 Liquid Bath is suitable has a wide temperature range, using silicon oils and other suitable liquids. All components in contact with the liquid are of stainless steel, and are insulated with materials which are complete...
Manual pneumatic pumps Ralston DCAP are reliable tools for precise pressure calibration, designed to perform in a wide range of environments. With their straightforward and intuitive design, these pumps are an ideal choice for both laborato...
The 920 and 920HV High Pressure Test Pumps are hand operated pressure pumps designed to generate pressure from 95% vacuum to 3,000psi (200bar). With a long lever, it just takes 40 seconds to reach 3,000 psi (200 bar). A high-quality screw p...
Indoor Air Quality (IAQ) measurements in offices, conference rooms, schools, etc.
Application range: 0...50 °C / 0...95 %rh, non-condensing
CO2 Measurement principle: Infrared (NDIR) with automatic calibration (ABC)
CO2 Display Wal...
HC2-HK25 / HC2-HK40
The handheld probe is especially suitable for mobile measurements of high temperatures. It measures humidity and temperature and calculates the dew/frost point.
Applications
Climatic and temperature chambers, dryers, ...
A robust, linear and stable thermal conductivity analyzer for measurement of binary gas mixes such as air in hydrogen, nitrogen, argon, helium or carbon-dioxide. The sensor is housed in a rugged casing, making it suitable for a wide range o...
Multi Function: Six Modes including Dry Block and Liquid Bath Fast Response 35mm x 160mm Calibration Volume Calibrate Whole Measurement Loop Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probe...
The PV621, 622 and 623 manual pressure generating base stations
Features
• A uniquely capable, re-arrangeable and self-contained pressure test system
• Advanced pressure generation
— 95% vacuum to 20 bar (300 psi) pneumatic
— 95% vacuu...

-350x280.jpg)
-350x280.jpg)





-350x280.jpeg)



























-327x226.jpeg)








-327x226.jpg)








-327x226.jpeg)
-327x226.jpeg)


-327x226.jpg)
-327x226.jpg)





-327x226.jpeg)
-327x226.jpeg)

