-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: 3000CS
Brief specifications
More details
The 3000CS provides a precision set of current shunts for current ranges from 10mA through to 10A to provide additional ranges for multimeters that either lack sufficient accuracy at required currents, or lack the required current ranges entirely. A set of 4 shunts with dedicated current input and voltage sense inputs, with 1 year stability of up to 5ppm, and temperature coefficients of less than 0.6ppm/°C. High precision current sensing foil resistors provide unmatched self heating effects without requiring immersion in oil baths. To verify self-heating effects, a 4 wire PT100 output is provided so self heating effects can be monitored and independently verified against existing standards.
3000CS precision curent shunts precision references and standards
Precision current shunt array
Values 10mA through to 10A
1 year stability of up to 5ppm
4-Wire PT100 Output
Temperature coefficients of less than 0.6ppm/°C
Featured Products
The HygroGen2 is a generator of controlled relative humidity and temperature environments,
primarily for use in calibrating humidity instrumentation, but is also well suited to the
calibration of temperature instrumentation, particularly ...
9915-878 The protective transport case is designed for storage and safe transport of Additel ADT878 series temperature calibrators.
The case has an impact-resistant body made of corrosion-resistant PP Alloy material and provides protecti...
-327x226.jpg)
The ADT912A Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 60 psi (4 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up...
Application works as Control Software for products of Applied Precision. It can show measured values, control meter error measurement and generation of signals (in PTE device)...
The Additel 793 pressure controller combines the latest control/measure technology, modular design and easy to use/maintenance features into a single users friendly device. The Additel 793 provides pressure control up to 15,000 psi (1,000 B...
Our range of oxygen analyzers are designed to monitor gas produced or used in industrial processes where trace oxygen from low parts per million to pure O2 must be precisely measured. Utilizing AII’s high performance galvanic oxygen sensors...
The 3000ZR is an integrated 1.018V and 10V reference standard using multiple independent zeners. Backup power is provided via an internal rechargeable battery for transportation for calibration and use in your laboratory. The 3000ZR is fitt...
The Meter Handling System is composed of a set of movable trolleys and fixed stands network. The system is utilized for convey and connection of tested meters for technological operations. The system is capable to handle single-phase two-wi...
The RPS/DPS 8000 is the first product to incorporate the exciting new TERPS technology. TERPS is a resonant silicon pressure sensor technology platform that provides an order of magnitude greater accuracy and stability than current pressure...
The Model 787 calibrator redefines industry standards by blending industry leading performance and speed of operation within a robust design tailored for extreme conditions. The maximum operating temperature is 660°C allowing wide range of ...
Service cable for Rotronic Transmitters.Compatible with HF3/4/5/7/8, HL20D...
The Additel 100-FLT-1K is a pneumatic filter and liquid trap covering from -15 to 1,000 psi (-1.0 to 70 bar). This filter is ideal for your pneumatic measurement or calibration applications and contains an easy to use drain valve for removi...
4610M DC VOLTAGE 0 - ±1025V DC CURRENT 0 - 30A AC VOLTAGE 2mV - 1000V, 10Hz - 1MHz AC CURRENT 20uA - 30A, 10Hz - 30kHz RESISTANCE (PASSIVE) 0 Ohms - 1 GOhm CAPACITANCE (PASSIVE) 1nF - 10uF FREQUENCY 10Hz - 1MHz TEMPERATURE (THERMOCOUPLE) J ...
Calibration test bench for gas meters
Calibration of domestic gas meters (G1,6…G400)
The test bench is especially designed for the calibration of domestic gas meters (diaphragm gas meters, ultrasonic gas meters, thermoelectric gas met...
The DCS system is a complete rack-mounted calibration station capable of producing a flow of air (or nitrogen) at a pre-specified range of dew-point temperatures from a minimum of -100°C (-148°F) to a maximum of +20°C (+68°F). Through custo...
The piston gauge’s fundamental operating principle and excellent long term stability have made it an indispensable tool in high accuracy pressure metrology. As accuracy levels increase, quality assurance requirements intensify and automatio...
The P3000 Series is the culmination of over 50 years experience in the production and design of primary pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation these deadwe...
The XZR200 Oxygen Analyzer is suitable for measuring in oxygen closed systems, such as ventilation pipes and boiler exhaust flues.
A cost effective zirconium-dioxide analyzer to measure percentage level oxygen in combustion processes, ambi...
Meteorological probes with integrated electronics for two active outputs (current or voltage) and equipped with a RS485 interface. Humidity and temperature are measured with the plug-in HygroClip HC2-S3 sensor module. In addition the MP102H...
The insertion probe is suitable for measurement in dust-free bulk materials, bricks, concrete, etc (10 mm insertion probe: measurements in dusty bulk materials such as flour, sugar, etc.). It measures humidity and temperature and calculates...
