-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: 3000RS
Brief specifications
More details
The 3000RS is a modern precision resistance standard offering annual stabilities of better than 5ppm without the requirement for an oil bath, with temperature co-efficients as low as 0.1ppm/°C Using ultra-high precision, 4 wire hermetically sealed oil filled film resistors for values from 1 Ohm through to 100 kOhm, and oil filled precision wire wound resistors for the 1 MOhm and 10 MOhm, the 3000RS is suitable for roles of both a working secondary set of resistors or a primary resistance reference. Using the 3000RS with the 8500 low thermal scanner provides an automated solution for calibration of precision multimeters.
3000RS precision resistance standard precision references and standards
Decade resistances from 1 Ohm to 10MOhm
Temperature co-efficients as low as 0.1ppm/°C
Annual stabilities of better than 5ppm
Precision decade resistance reference
Featured Products
-327x226.jpeg)
-327x226.jpeg)
Isotech first introduced the Model 988 to assist in relation to the SARS outbreak during the early 2000s. Used to increase the accuracy of thermal imagers being used to measure human skin temperature in temperature screening of applications...
-327x226.jpeg)
The milliK Precision Thermometer from Isotech sets a new standard for the high accuracy measurement and calibration of Platinum Resistance Thermometers, Thermistors, Thermocouple and Process Instrumentation (4-20mA) over the range -270°C to...
The SF82 is a fast-responding moisture sensor for control of dew point and moisture content in compressed air dryers to maximize energy efficiency. Compressor rooms are often hot with temperatures reaching +50 °C. The SF82 is capable of rel...
Transmille offer a set of current shunts enabling measurement of current from 1mA through to 100A. Each shunt develops 0.7V at nominal full scale, enabling a wide range of multimeters to be used without loss of resolution due to changing ra...
-327x226.jpeg)
The function of this reference unit differs from other cased systems in that the temperature of the metal block in which the thermocouple and copper leads are inserted, actually varies with ambient temperature. A separate output signal is p...
The new Additel 946A Hydraulic Pressure Test Pump is a benchtop pressure pump designed to generate pressure to 15,000 psi (1,000 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the han...
-327x226.jpeg)
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide The Gemini range of Dry Blocks have high capacity allowing a large number of probes to be calibrated together. They are also suitable to accept large diameter probes with the block volum...
The XZR500 oxygen analyzer from Michell Instruments is designed to determine the excess air required for optimum combustion. It uses advanced Zirconium Oxide technology to measure levels of oxygen in harsh conditions such as boilers, incine...
Indoor Air Quality (IAQ) measurements in offices, conference rooms, schools, etc.
Application range: 0...50 °C / 0...95 %rh, non-condensing
CO2 Measurement principle: Infrared (NDIR) with automatic calibration (ABC)
CO2 Display Wal...
-327x226.jpg)
Comparator adaptor Allows the PV62XG pressure station to be used as a comparator. The adaptor connects to the stations pressure port and provides two outlet ports for making gauge comparisons. Compatible with the test point adaptors supplie...
/adt762_series_dd71 (1)-327x226.jpg)
The Additel 762 Automated Pressure Calibrator is unlike any other pressure calibrator on the market. This revolutionary product is a complete turnkey solution for automation of pressure calibration work up to 15,000 PSI.
Designed for use i...
The S4000 TRS measures very dry dew points down to -100 °C (-148 °F) with ±0.1 °C accuracy. It features excellent stability and reproducibility across its entire measurement range and is used in calibration and standards laboratories worldw...
A high pressure hydraulic hose rated to 1,000 bar (15,000 psi) and terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. The hose is self sealing to avoid leakage...
The MP100A is a combined humidity and temperature probe designed primarily for meteorological and general outdoor applications. Operation from DC voltage and low power consumption make the MP101A particularly suitable for operation at remot...
The Easidew I.S. (intrinsically safe) is designed to measure trace moisture and water dew-point in hazardous area applications. It is certified for measuring trace moisture in flammable or explosive gases and a wide range of non-polar liqui...
-327x226.png)
Additel's 673 Advanced Digital Pressure Calibrators will redefine the way you want to measure and calibrate pressure readings and devices! With wireless remote connectivity, microprocessor technology, state of-the-art silicon pressure senso...
Multifunction Calibrators Measure pressure, temperature, and electrical signals with greater accuracy with Druck’s portable multifunction calibration tools. Druck multifunction calibrators provide an all-in-one solution for your pressure me...
In many situations it can be very useful to measure water activity at goods-in, production or storage rooms, e.g. inspection of bulk materials to ensure they meet specifications...
With Additel/Land software, you may download test results stored in the internal memory of Additel calibrators to a PC, and export the results to an excel file. It is a free software package...
