-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: ADT100
Brief specifications
Pneumatic filter: from -1 to 70 bar
Hydraulic filter: from -1 to 700 bar
The filtration resolution of the pneumatic filter is 0.04 mm
The filtering capacity of the hydraulic filter is 0.07 mm
Ease of maintenance
The possibility of choosing a connection thread
More details
The Additel 100-FLT-1K is a pneumatic filter and liquid trap covering from -15 to 1,000 psi (-1.0 to 70 bar). This filter is ideal for your pneumatic measurement or calibration applications and contains an easy to use drain valve for removing dirt, moisture or contaminates. For hydraulic applications, the Additel 100-FLT-10K, hydraulic filter can be used up to 10K psi (700 bar). With a filter resolution of 0.07 mm contaminants or debris are captured in the filter which is easy to clean and maintain. Each filter is configured with a variety of pressure connections designed to meet the most common applications.
Additel 100 Filter
- Pneumatic filter: from -1 to 70 bar
- Hydraulic filter: from -1 to 700 bar
- Filtering resolution <0.04 mm
- Ease of maintenance
- Selection of connection thread
/attachments/ADT_DS/HosesAdaptersAndFittings.pdf
Featured Products
The microK 70 and 125 models are designed for the Primary Temperature Laboratories whilst the microK 250 and 500 models were designed for the Secondary Laboratory as well as a wide range of high accuracy industrial and scientific calibratio...
The Easidew I.S. (intrinsically safe) is designed to measure trace moisture and water dew-point in hazardous area applications. It is certified for measuring trace moisture in flammable or explosive gases and a wide range of non-polar liqui...
The Rotronic HygroLab is an innovative high-end laboratory analyzer for water activity measurements with up to four measurement probe inputs. Simultaneous or asynchronous measurement with the tried-and-tested AW Quick measuring function for...
The micro processor control and multi-point calibration gives the PCMini52 RH probe excellent performance in terms of accuracy and linearity. The mini probe has two linear analog outputs for temperature and relative humidity...
GasPro – Mobile gas sampler
Representative cyclical gas sampling to determine gas quality in the gas network.
Analysing the gas quality in the gas network is essential to monitor technical specifications and ensure correct billing. Th...
The ADT601Ex intrinsically safe digital pressure gauge is designed to improve upon traditional dial pressure gauges by providing a reliable and accurate digital solution for a minimal investment. The included Bluetooth technology allows use...
9915-878 The protective transport case is designed for storage and safe transport of Additel ADT878 series temperature calibrators.
The case has an impact-resistant body made of corrosion-resistant PP Alloy material and provides protecti...
Use I-Cal Easy to automate sensor calibration, enter up to 20 calibration points and let the software set the bath, wait for stability and log the data automatically. Choose the stability criteria and how many points to record at each calib...
-327x226.jpg)
Prevents contamination of the PV621, 622 and 624 pneumatic systems and cross contamination from one device under test to another. The IDT connects directly to the PV621, 622 and 624 pressure port and replicates the quick fit connection for ...
-327x226.jpeg)
The function of this reference unit differs from other cased systems in that the temperature of the metal block in which the thermocouple and copper leads are inserted, actually varies with ambient temperature. A separate output signal is p...
USB to RS 232 cable Connects the DPI620G to an RS 232 interface (not compatible with DPI620G-IS)...
Request Information Service The PCR from Michell is a transportable gas blender in a flight case, suitable for calibrating a multitude of gas analyzers at virtually any location and has been designed to allow the blending of two or three...
Additel's 273Ex is an Intrinsically safe handheld multifunctional pressure calibrator with a color touchscreen, smartphone like interface, built-in quick test tasks and optional HART communications capability. This innovative Additel produc...
These Platinum / Palladium Thermocouples (Pt/Pd) are manufactured by the National Physical Laboratory (NPL) who have developed a novel physical mechanism which mitigates the mechanical stresses caused by the different thermal expansion of P...
GUILDLINE INSTRUMENTS 9340 SERIES of precision DC Resistance Standards are a complete family of easy to use resistance standards offering the best combination of highest accuracy and widest range commercially available. PRODUCT FEATURES Wid...
GUILDLINE INSTRUMENTS 9334A SERIES of Resistance Standards are designed as very stable laboratory standards for high accuracy resistance calibration in air, without the need for a temperature controlled bath. PRODUCT FEATURES 12 Month Stabi...
Promet I.S. Process Moisture Analyzers are heavy duty, industrial hygrometer systems for measurement of high pressure, process gases and vaporized liquids on natural gas platforms and terminals, petrochemical plants and industrial gas manuf...
In many situations it can be very useful to measure water activity at goods-in, production or storage rooms, e.g. inspection of bulk materials to ensure they meet specifications...
The HygroFlex1 series is the latest development in inexpensive HVAC transmitters for relative humidity and temperature. The devices are equipped
with the tried-and-tested Rotronic Hygromer® IN-1 sensor and boast unbeatable value for money....
The Pegasus R is a compact furnace for calibrating radiation pyrometers. The temperature of the furnace is set on a controller, whilst an independent indicator, whose sensor fits into the cavity, indicates the actual radiance temperature. T...
