-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: MODEL
Brief specifications
More details
THE 9200 AND 9210 PROVIDE DUAL CAPABILITIES AS A VERSATILE HIGH POWER MULTIPLE VALUE RESISTANCE STANDARD OR AS A PRECISION DC CURRENT SHUNT PRODUCT FEATURES Accuracy ± 0.01% (100 ppm) Resistance Values from 0.01 to 10,000 Ω (Model 9200) Resistance Values from 0.0025 to 0.1 Ω (Model 9210) Currents up to 15 A (Model 9200) Currents up to 60 A (Model 9210) Compact for Bench Use Very Low Temperature Coefficients < 5ppm/0C High Stability < 10 ppm/year
Документация
MODEL 9200&9210DC MULTI-VALUE RESISTANCE STANDARDS & CURRENT SHUNTS
Featured Products
This adapter mounts directly to the test port of the calibrator and allows for the calibration of two instruments at the same time, or the connection of a reference test instrument. Maximum working pressure is 10,000 psi (700 bar)...
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide The Pegasus range offers extreme high temperature calibration in an easy to use portable package – ideal for the calibration of high temperature thermocouples. It has been designed for f...
Operate confidently in cold environments, even as low as -29°C. The ruggedly designed Model 786 takes laboratory level performance into the harshest of environments.
Unlike other calibrators that cannot be used in the extreme cold, the 7...
Additel ACal (9530) is a powerful software package designed for varying degrees of automation of calibrations and management of your laboratory. ACal combines pressure and temperature instrument calibration automation features with laborato...
The Fluke Model P5551 Pointer Remover/Punch is a specialized tool designed to efficiently remove and accurately refit the pointer of a pressure gauge. It is particularly useful for maintenance and calibration tasks involving pressure measur...
Additel's 260Ex is an intrinsically safe handheld multichannel reference recorder with 8 different channel configurations. Armed with Additel’s most versatile and capable handheld, technicians are now able to measure and collect data for pr...
IDOS to USB converter Allows connection of an IDOS universal pressure module to the DPI620G. P/N IO620-USB-PC is also required to connect the converter to the DPI620G USB port. (not compatible with DPI620G-IS)...
GUILDLINE INSTRUMENTS provides two series of the best performing, most compact, wide-band AC current shunts that are commercially available PRODUCT FEATURES High Current Values to 100 A AC/DC Difference Essentially Zero at Power Frequencies...
The most used temperature for calibration is 0°C. The normal way of creating 0°C is via a mixture of ice and water in a Dewar Flask. However, this can give errors of up to 4°C because water is densest at 4°C and so as the ice melts the temp...
To calibrate gauges with the pressure connection on the rear (for example, panel mount gauges) in their correct operating position, an angle adaptor should be used. The angle adapter uses the standard gauge adapters and positions the gauges...
The Fluke Calibration 2271A Industrial Pressure Calibrator provides a complete, automated solution for calibrating a wide variety of pressure gauges and sensors. Thanks to its modular design, it can be configured to meet different needs and...
-327x226.jpg)
The PV210 is a lightweight, yet rugged and durable, low pressure and vacuum hand pump offering exceptional fine control. Thermally insulated to eliminate hand held temperature effects and supplied with a built-in pressure relief valve to pr...
GPR-1200 MS-2 (ATEX)
Designed for spot-checking ultra-high purity gases, the
GPR-1200 MS-2 has a range of 0-1 ppm and LDL of 5 ppb
O2 – the lowest oxygen measurements available with a
portable instrument. ATEX-approved version available...
-327x226.jpeg)
The Oceanus-6 PLUS has all the advantages of the Isocal-6 models but with a substantially larger calibration volume, 50mm diameter by 300mm deep. The Oceanus-6 can be used as a Dry Block, a Liquid Bath, a Blackbody Source for infrared therm...
The Working Standard WS 2330 is a three-phase precision reference meter for electrical power and energy measurement, dedicated to on-site meter testing. The device provides also function of local data exchange with smart meters (data readou...
-327x226.jpg)
-327x226.jpg)
The 920 and 920HV High Pressure Test Pumps are hand operated pressure pumps designed to generate pressure from 95% vacuum to 3,000psi (200bar). With a long lever, it just takes 40 seconds to reach 3,000 psi (200 bar). A high-quality screw p...
A high pressure hydraulic hose rated to 1,000 bar (15,000 psi) and terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. The hose is self sealing to avoid leakage...
Software Package ELMA is dedicated for electricity meter testing and calibration. The package contains routines for control of hardware, data acquisition, evaluation of measurements, meter data exchange, output of documents, data archiving,...
The 33XXA Series multiproduct calibrators are modular versions of the class leading 3000A Series Calibrators. Designed to reduce cost, the 33XXA Series feature 0 - 20V DC output as standard with a wide range of options including 20V - 1000V...
-327x226.jpg)
The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innova...
