Success in motorsport depends on hundreds of components working together under extreme conditions, and Baker Hughes continues to develop Druck pressure transducers that give the ultimate performance. Druck motorsport sensors have become a world-leading product line used in Formula 1, World Rally Championship, and the Indy Racing League, amongst others. The 4300 & 4400 Series are the latest in the range of products that for many years have been “fine-tuned” in design to suit all chassis and engine pressure measurement requirements. 4400 Features: - Pressure Range: 1.7 bar (25 psi) up to 600 bar (8,700 psi) absolute - Operating Temperature Range: from 0°C to +175°C (32°F to 347°F) - Voltage Outputs: 0.5 - 4.5 V - Accuracy: to ±0.25% Full Scale (FS) Best Straight Line (BSL) - Construction: 12.5mm diameter stainless steel or titanium construction - Frequency response: to 3.5 kHz - 2x over pressure capability...

The Druck DPI 705E Series of handheld pressure manometers and optional temperature indicators combine tough and rugged design with accurate and reliable measurements. Compact and robust, the DPI 705E Series is designed for single-handed operation and provides many essential features required for routine maintenance and system troubleshooting. The Druck DPI 705E-IS model is the Intrinsically Safe (IS) version for use in hazardous environments. The DPI705E includes an internal absolute, gauge, or differential sensor. Any number of remote sensors can be used with a single DPI705E as all sensors hold their own calibration data and are supplied with a 2.9m (9.5 feet) cable. RTD-INTERFACE This optional add-on probe interface enables users to perform plug and play temperature measurements, displaying units as resistance or temperature....

The Druck PV211 Pneumatic Hand Pump is a lightweight, high quality combined pressure and vacuum hand pump. It has been designed to provide maximum pneumatic pressures efficiently and effortlessly. The PV211 can be used as a portable Pressure Comparator in conjunction with various pressure indicating devices. This precision unit includes an adjustable over pressure protection system as standard. An optional accessory kit is available that includes a hard carrying case with foam cutouts to protect the pump as well as a  adapter sets with additional order....

The PV411A is a high-quality field proven pressure and vacuum hand pump providing functionality, which has never been seen before in a handheld pressure source. This remarkable product replaces four conventional hand pumps and offers the following additional features: - Hydraulic pressures to 10,000 psi - Pneumatic pressures to 600 psi - Vacuum to 28.5 inHg - Low-pressure fine control - Unique vacuum priming function removes trapped air during hydraulic operation - High-pressure generation is accomplished with the volume adjuster, eliminating the physical effort associated with conventional hand pumps - Pressure/Vacuum selector valve also provides exceptional fine control pressure relief in both pneumatic and hydraulic modes - Tamper-proof adjustable overpressure protection valve which can be set to relieve pressures from 300 to 10,000 psi - Removable hydraulic reservoir which can be disconnected from the pump without draining the fluid - Reservoir safety feature with spring-loaded top cover vents if inadvertently pressurized above 8 psi - Hydraulic mode designed to operate with distilled water and/or high viscosity mineral oil - Highly sensitive volume adjuster is used for hydraulic, pneumatic, vacuum, and low-pressure operation - Built-in stroke adjuster controls the pressure/vacuum generated per stroke - 240° swivel head for optimum viewing of reference indicators - Internal moving parts are PTFE anodized for reduced friction and wear - Ergonomic, rugged, and light...

PM620 now incorporates our unique range of TERPS resonant silicon pressure sensor technology, the PM620T and the PM620TS intrinsically safe version. Providing up to four times greater stability and higher accuracy than current pressure measurement technologies. Features include: - Total uncertainty from 0.0125% FS - Temperature-compensated accuracy from -10°C to 50°C (-14°F to 122°F) - Simple screw fit - hand tight no tools required - Ranges from 1.2 bar to 100 bar (17.5 psi to 1500 psi) - Compatibility with pressure calibrators such as DPI612 and DPI620G/DPI620G-IS series - Fully interchangeable with no need for set-up or calibration...

The PM620 series is the latest development in digital output sensor technology incorporating a number of key innovations to allow pressure re-ranging of compatible equipment. A simple screw fit makes both the pressure and electrical connections without the need for tools, sealing tape, cables or plugs and digital characterization allows interchangeability without set-up or calibration. The PM620LP has a true differential measurement via a fitted barbed low pressure (LP) pressure connector and is supplied with 1 x barbed high pressure (HP) pressure connector to fit a PV624 test port, 1 x equalizing valve and 1M (3.3 ft) length of silicon twin tubing. Features include: - Fully interchangeable with no need for set-up or calibration - Simple screw fit - hand tight no tools required - Ranges from 25 mbar to 1,000 bar (10 inH2 O to 15,000 psi) - Accuracy from 0.005% FS - Safe and Hazardous area Versions available - Gauge, differential or absolute pressures - IS model is ATEX and IEC approved Intrinsically Safe...

Complete set of pressure modules for PACE 5000 and 6000 series controllers They have a wide measuring range up to 210 bar of pneumatic pressure. There is a wide range of measurement accuracy to choose from...

4Sight2 Calibration software is a web-based calibration management tool that helps you maintain and control your calibration environment to the highest metrology standards. 4Sight2 from Druck, a Baker Hughes business, offers easy-to-use, cost effective and scalable calibration management that is equally effective for single use or global multi-site operations. This configurable software is designed to empower your organization to operate simply and securely, connecting your people to instruments, data and enhanced analytics. Purpose-built with available custom installation support, 4Sight2 is designed to deliver actionable intelligence and transformative insights. Developed in-house, the custom software package enhances the visibility of your assets and data, helping you plan your resources to support effective maintenance, process efficiency and regulatory compliance....

PM705E is a remote pressure module designed for high-precision pressure measurement of liquid and gaseous media in industrial and laboratory applications. The module provides reliable data readings under conditions of increased vibration and extreme temperatures, making it universal for various applications. Main features: Pressure measurement range: from -1 to 1400 bar. Sensor type: highly sensitive sensor with a membrane structure, providing stable readings even during long-term operation. Application: the module is suitable for the oil and gas industry, chemical production, food and pharmaceutical industries. The PM705E is characterized by durability, accuracy and reliability, making it an excellent solution for tasks requiring continuous pressure monitoring and control in difficult conditions....

IDOS (Intelligent Digital Output Sensor) are smart, Universal Pressure Modules that are interchangeable between any IDOS compatible Druck instruments. They are truly “Plug and Play” modules in that they do not require calibration or set-up when they are plugged into the particular instrument. As a result, it gives you a cost- effective solution for expanding instrument pressure ranges by simply adding a new IDOS pressure range when needed. Most Druck DPI Series instruments have an IDOS compatible port for connecting remote IDOS pressure modules....

Dirt moisture trap Prevents contamination of the PV621 and 622 pneumatic systems and cross contamination from one device under test to another. The IDT connects directly to the PV621 and 622 pressure port and replicates the quick fit connection for compatibility with the hose and adaptor kits P/N IO620-IDT621: Maximum working pressure 20 bar (300 psi) P/N IO620-IDT622: Maximum working pressure 100 bar (1,500 psi)...

Prevents contamination of the PV621, 622 and 624 pneumatic systems and cross contamination from one device under test to another. The IDT connects directly to the PV621, 622 and 624 pressure port and replicates the quick fit connection for compatibility with the hose and adapter kits....