-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: 6625A
Brief specifications
More details
Guildline Instruments 6625A is the only true modular Resistance and Current Measurement System providing users with unique industry leading features and capabilities. PRODUCT FEATURES Complete Turn-Key System – Fully Integrated, Wired, Tested and Ready-to-Use Widest Available Resistance Range from 1 μΩ ~1 GΩ with Internal Voltages to 1 kVdc Precision Current Sources / Range Extension from 3 A to 10,000 A with Built-In Precision Current Source and Electronic Switching Wide Range of Ratios: 0.1:1 ~ 100:1, and Up to 2,000,000:1 and More with Range Extension Full 10.5 Digits (0.1 ppb) Display Resolution Resolution: ± 0.1 ppb of Full Scale Unique Measurement Results and Trending Display Includes Manual and Automated Operation Modular Design, Expandable Capabilities, Investment Protection Change Key parameters “On-the-Fly” While Measurements are Running in Manual and Automated Modes Internal Temperature Bridge Option Available BridgeWorksTM Data Acquisition Software Unique Calibration Support Strategy
Документация
6625A is the only true modular Resistance and Current Measurement System
Featured Products
Precision Flexible AC Current Probes SymmProFlex® FCP 2x21 are based on Rogowski principle designed to measure alternating current. Current Probes SymmProFlex® FCP 2x21 series can be used as AC current sensors for multimeters, scopemeters, ...
IDOS (Intelligent Digital Output Sensor) are smart, Universal Pressure Modules that are interchangeable between any IDOS compatible Druck instruments. They are truly “Plug and Play” modules in that they do not require calibration or set-up ...
Software Designed to be used in conjunction with the 8000 Precision Multimeter Series and 8500 Low Thermal Scanner, ProGraph provides an instant solution for graphing stability, temperature and many other parameters. ProGraph is a 'plug and...
-327x226.jpeg)
-327x226.jpeg)
Fast-Cal – the product range you designed During early 2004 20 experienced engineers from many parts of the world were asked to produce their ideal specification for industrial calibration. Their top ten requirements, in order of priority, ...
Designed with low cost, portability and ease of use in mind, the 2080 provides on or off site verification of RCD testers, Loop testers, Continuity and Insulation testers and multifunction testers. The 2080 is simple to use and provides the...
9915-878 The protective transport case is designed for storage and safe transport of Additel ADT878 series temperature calibrators.
The case has an impact-resistant body made of corrosion-resistant PP Alloy material and provides protecti...
-327x226.jpg)
PM705E is a remote pressure module designed for high-precision pressure measurement of liquid and gaseous media in industrial and laboratory applications. The module provides reliable data readings under conditions of increased vibration an...
The new Additel 946A Hydraulic Pressure Test Pump is a benchtop pressure pump designed to generate pressure to 15,000 psi (1,000 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the han...
The Model 2468 Pitot Static Primary Standard is specifically designed for calibrating today’s high performance flight line and Air Data Test Systems. With the new autofloat controller, operator intervention is reduced to simply applying the...
Isotech has produced over 200 high temperature thermometers which have been sold world-wide for use up to the silver point. As a consequence of our predelivery testing alone we have probably made more silver point calibrations than anyone e...
-327x226.jpeg)
Primary Standard cells fit into the Medusa and Oberon, covering from Indium to Copper Points. These cylindrical cells are 42mm diameter and have a cavity 9mm diameter x 87mm deep. The Medium Temperature “Hockey Puck” cells are 64mm diameter...
-327x226.jpg)
-327x226.jpg)
The Druck PV211 Pneumatic Hand Pump is a lightweight, high quality combined pressure and vacuum hand pump. It has been designed to provide maximum pneumatic pressures efficiently and effortlessly.
The PV211 can be used as a portable Pres...
The P3000 Series is the culmination of over 50 years of experience in the production and design of high performance pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation ...
Software Package ELMA is dedicated for electricity meter testing and calibration. The package contains routines for control of hardware, data acquisition, evaluation of measurements, meter data exchange, output of documents, data archiving,...
The Easidew 34 is a dew-point transmitter with a 3/4” process connection. Designed for use in industrial conditions, it has a wide measurement range from -110 to + 20 °C dew point.
Based on Ceramic Metal-Oxide Moisture Sensor the Easidew 3...
Isotech produces two eight way selector switches, one for resistance thermometers Model 954 and Model 958 for thermocouples. These switches have been designed for use in conjunction with our TTI range. The switches allow easy selection of c...
The GPR-7500 analyzer utilizes the low-power electro-chemical sensor technology to provide a cost-effective and easy to maintain online-installation hydrogen sulfide measurement in a small package. The GPR-7100 is a portable H2S analyzer ve...
GUILDLINE INSTRUMENTS 9340 SERIES of precision DC Resistance Standards are a complete family of easy to use resistance standards offering the best combination of highest accuracy and widest range commercially available. PRODUCT FEATURES Wid...
A full specification on-line hygrometer for the measurement of dew point in air and process gases, with wide operating range and multiple display options...
The GPR-3500 MOVR Portable Oxygen Purity Analyzer is the only electrochemical oxygen sensor based analyzer capable of measuring 100% oxygen on a continuous 24/7 basis for the purpose of verifying the purity of medical grade oxygen transport...
