-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: 9340-4T
Brief specifications
More details
Guildline Instruments 9340-4T Series of precision RTD Simulators and DC Resistance Standards are a complete family of easy to use low to ultra-low, 4 Wire resistance standards offering the best combination of accuracy and resistance range that is commercially available. PRODUCT FEATURES Resistance Ranges include Decades from 1 µΩ to 10 kΩ True RTD Simulation with High Decade Resolution Excellent for milli-Ohm and micro-Ohm Applications and Instruments True 4-Wire Terminal Design Accuracy Better than ± 0.01 % Temperature Coefficient Less than 5 ppm/°C Switch and Wiring Resistance Effects of the Four Terminal Arrangement are Less than 10 µΩ Direct Reading of Resistance Value at the 4 Terminals Long Life Rotary Switches with Solid Silver Contacts An Overlap ‘10’ Position for Fine-Tuning No Other Decade Standard on the Market Today with these Uncertainties and Low Ohmic Range
9340-4T Series of precision RTD Simulators and DC Resistance Standards
- Resistance ranges from 1 µΩ to 10 kΩ
- For devices in the milliohm range
- For devices in microohm ranges
- The error is less than ± 0.01%
- Temperature coefficient less than 5 ppm/°C
Featured Products
LMF® – LaminarMasterFlow®
High-precision flow measurement of gas and air
The EP LMF® – LaminarMasterFlow® is a complete system for high precision flow measurement of gas and air (volume and mass flow). The LMF® system consists of a fl...
-327x226.jpeg)
-327x226.jpeg)
Multi Function: Six Modes including Dry Block and Liquid Bath Fast Response 35mm x 160mm Calibration Volume Calibrate Whole Measurement Loop Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probe...
The Meter Handling System is composed of a set of movable trolleys and fixed stands network. The system is utilized for convey and connection of tested meters for technological operations. The system is capable to handle single-phase two-wi...
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide The Hyperion and Drago (30°C to 250°C) have large calibration volumes, 65mm x 160mm deep, which makes them ideal to use as portable liquid baths for high accuracy calibration of awkwardl...
The HC2-A extension cables extend the HC2-A probes away from transmitters, handheld instruments or data loggers and data loggers. The HC2-A extension cables can be used up to 5 meters. For longer cable runs, use the AC3003 signal amplifier ...
-327x226.jpeg)
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide The Gemini range of Dry Blocks have high capacity allowing a large number of probes to be calibrated together. They are also suitable to accept large diameter probes with the block volum...
RPD Reference gas meters
The gold standard for low flow measurement
The rotary piston gas meters GM16 meet the highest demands on the reliable and precise reference measurement of low flow up to 0.01 m³/h. You achieve an excellent mea...
Designed to pre-warm and anneal Standard Platinum Resistance Thermometers Maintenance Free Use Automatic Temperature Cycling The Annealing Furnace, model 414, is designed to heat, anneal and cool Standard Platinum Resistance Thermometers (S...
Quite simply the Isotech TTI-22 High Accuracy Thermometer sets new standards in the price to performance ratio for industrial and secondary resistance thermometry. If you need high accuracy at an affordable price you have to look at the TTI...
The Reference Standard RS 3330 is designed for the highest possible precision meter for quantities related to electrical power and energy measurements. The Reference Standard is designed to meet all requirements put on a reference standard ...
Are you fed up with cold wet hands, and hours of frustration when you produce an ice mantle in your Triple Point Cell? Change your life and try the Isotech Ice Mantle Maker. It works by using a specially designed anti-gravity heat pipe. The...
The Additel 100-FLT-1K is a pneumatic filter and liquid trap covering from -15 to 1,000 psi (-1.0 to 70 bar). This filter is ideal for your pneumatic measurement or calibration applications and contains an easy to use drain valve for removi...
A comprehensive and self-contained tool to make routine service and maintenance of the Easidew and Pura ranges of dew-point transmitters simple to carry out.
The Universal Communications Kit comprises:
Electronic communications platform
...
Probes are suitable for use with all Isotech thermocouple reference units or may be used with any other equipment including ice flasks and ice point reference units. They can be supplied to suit a single thermocouple, or up to ten double ju...
Guildline's 6624CT-3000 DC High Current Transformer provides very accurate DC current measurements up to 3000 Amperes. The direct current transformer is designed with an open window to pass a single cable, set of cables, or buss bar that ca...
Isotech have a wide range of Dry Blocks to suit probes requiring a large immersion depth. These products feature large and deep calibration volumes. As such they are less portable than the earlier Dry Blocks, but have higher capacities and ...
A protective carrying case with shoulder strap and large pocket for accessories. Also accommodates the assembled system including the DPI620G and PM620...
The ADTS553F air data test set is a portable three-channel flightline pitot static tester. It provides pitot static air data validation, leak testing, fault-finding and avionics instrumentation testing for any aircraft requiring angle of at...
7750i Air Data Test Set
The Model 7750i Air Data Test Set represents the latest generation Air Data Test Set (ADTS), incorporating a unique quartz sensor having unequalled precision and long term stability with the latest pressure control ...
Analytical Industries’ high-accuracy portable oxygen analyzers are for applications which must be controlled at several defined measurement points. The GPR-3500 model has a compact, rugged enclosure and includes stainless steel wetted parts...
