Каталог
Назад

Tek Know Ukraine

Solution for metrology

With us expertly :)

Explosion Proof Moisture Transmitter - Easidew PRO XP

- Reliable Analysis of Dew-Point or Moisture Content in Gases and Liquids

- Features

-

- Measurement ranges -110 up to +20°Cdp (-166 to 68°Fdp)

- Global explosion / flameproof certification

- Accuracy ±1°Cdp (±1.8°Fdp)

- 2-wire 4-20 mA output

- Traceable 13-point calibration certificate

- 450 bar (6527 psi) pressure rating

- Low cost of ownership and easy maintenance with sensor

- exchange program

- 3/4” UNF industry standard process connection

- EN 10204 3.1 material certification

- Moisture in gases and liquids

- Integral display meter

- Oxygen service cleaned

Brief specifications


More details

The Easidew PRO XP moisture transmitter is an explosion-proof dew-point transmitter for trace moisture measurements in gases or liquids in hazardous areas. It is certified by ATEX, CQPSUS, IECEx, and GOST for use in any North American, European or Asian zone.

The transmitter has a wide dew-point measurement range of –110 to +20°Cdp (-166 to 68°Fdp) with industry-standard process and electrical connections, ensuring low installation costs. The Easidew PRO XP incorporates the latest Michell Ceramic Metal-Oxide Moisture Sensor providing stable and reliable measurements for all new and replacement moisture applications. The unit can also be supplied with an integral 4-digit LED display, displaying the configured moisture output signal.


ВимірюванняГенерація (Імітація)


Explosion Proof Moisture Transmitter - Easidew PRO XP

- Reliable Analysis of Dew-Point or Moisture Content in Gases and Liquids

- Features

-

- Measurement ranges -110 up to +20°Cdp (-166 to 68°Fdp)

- Global explosion / flameproof certification

- Accuracy ±1°Cdp (±1.8°Fdp)

- 2-wire 4-20 mA output

- Traceable 13-point calibration certificate

- 450 bar (6527 psi) pressure rating

- Low cost of ownership and easy maintenance with sensor

- exchange program

- 3/4” UNF industry standard process connection

- EN 10204 3.1 material certification

- Moisture in gases and liquids

- Integral display meter

- Oxygen service cleaned

Featured Products

Medusa R Model 999
Medusa R Model 999
The Medusa R Blackbody Calibration Source allows for calibration of noncontact infrared thermometers over the temperature range 30°C to 550°C. It is suitable for use as a radiation source for infrared thermometers. The cavity is 45 x 285mm ...
Код: 999
Parallel Tube Liquid Bath Model 915MWE
Parallel Tube Liquid Bath Model 915MWE
The Isotech Model 915 Liquid Bath is suitable has a wide temperature range, using silicon oils and other suitable liquids. All components in contact with the liquid are of stainless steel, and are insulated with materials which are complete...
Код: 915MWE
Extension Cables for Rotronic Humidity Probes HC2-(A)
Extension cables - Passiv extension cable / Active extension cable...
Код: HC2-(A)
microK Channel Expander
microK Channel Expander
The microsKanner can be used with any member of the microK family to add further channels, up to a maximum of 90 expansion channels. Easy to Use: The use of plug-and-play technology means that the extra channels appear automatically on your...
Код: microK
PROGRAPH Measurement Analysis Software
Software Designed to be used in conjunction with the 8000 Precision Multimeter Series and 8500 Low Thermal Scanner, ProGraph provides an instant solution for graphing stability, temperature and many other parameters. ProGraph is a 'plug and...
Код: PROGRAPH
2090 PROGRAMMABLE DECADE RESISTANCE BOX precision references and standards
Connect the 2090 via RS232 connection (USB to RS232 adapter available) to a computer to automate any task performed by a decade resistance box to automate calibration or ATE tasks. Providing a basic accuracy of up to 0.1% (0.01% accuracy op...
Код: 2090
Michell Condumax II and OptiPEAK TDL600 Dew-Point Analyzer
Michell Condumax II and OptiPEAK TDL600 Dew-Point Analyzer
Hydrocarbon dew point (HCDP) and moisture are key quality parameters to ensure the quality of pipeline transmission gas. With the combined Condumax II and OptiPEAK TDL600 analyzer system pipeline operators have the assurance of the most wid...
Код: TDL600 Dew-Point
GasPro – Mobile gas sampler
GasPro – Mobile gas sampler Representative cyclical gas sampling to determine gas quality in the gas network. Analysing the gas quality in the gas network is essential to monitor technical specifications and ensure correct billing. Th...
Код: GasPro
Standard Thermocouple Model 1600
Standard Thermocouple Model 1600
The Isothermal range of Thermocouple Standards are the result of many years development. The type R and S standards will cover the range from 0°C to 1600°C. The measuring assembly comprises a 7mm x 300mm or 600mm gas tight 99.7% recrystalli...
Код: 1600
3000CS precision curent shunts precision references and standards
The 3000CS provides a precision set of current shunts for current ranges from 10mA through to 10A to provide additional ranges for multimeters that either lack sufficient accuracy at required currents, or lack the required current ranges en...
4.5000/5 14text_more_review
Код: 3000CS
Hyperion 4936
Hyperion 4936
Need advice on which model? Dry Block Selection Guide The Hyperion and Drago (30°C to 250°C) have large calibration volumes, 65mm x 160mm deep, which makes them ideal to use as portable liquid baths for high accuracy calibration of awkwardl...
2.0000/5 1text_less_review
Код: 4936
New Reference Standard
New Reference Standard
The Reference Standard RS 3330 is designed for the highest possible precision meter for quantities related to electrical power and energy measurements. The Reference Standard is designed to meet all requirements put on a reference standard ...
Код: New Reference Standard
Isotech Model 670 SPRT
Isotech Model 670 SPRT
The 670SQ is our latest thermometer, to be specifically designed to give optimum performance up to the aluminium point. Its construction permits the four internal platinum lead wires to expand and contract in the same manner as those of sil...
Код: 670
Working Standard
Working Standard
The Working Standard WS 2x20 is a single-phase (WS 2120) and three-phase (WS 2320) precision reference meter for electrical power and energy measurement, dedicated to on-site meters testing. The device can be used also as hand-held unit for...
Код: WS
ADT762(W) Automated Hydraulic Pressure Calibrator
ADT762(W) Automated Hydraulic Pressure Calibrator
The Additel 762 Automated Pressure Calibrator is unlike any other pressure calibrator on the market. This revolutionary product is a complete turnkey solution for automation of pressure calibration work up to 15,000 PSI. Designed for use i...
Код: ADT762(W)
PPC4 Pressure Controller
PPC4 Pressure Controller
PPC4 is a stand-alone pressure controller intended for precision setting and control of gas pressure into a closed volume as is commonly needed for the calibration and testing of pressure measuring instruments. It has been designed to provi...
Код: PPC4
AC/DC shunts precision references and standards
AC/DC shunts precision references and standards
Transmille offer a set of current shunts enabling measurement of current from 1mA through to 100A. Each shunt develops 0.7V at nominal full scale, enabling a wide range of multimeters to be used without loss of resolution due to changing ra...
Код: AC/DC
8109 precision multimeter
8109 precision multimeter
The 8100 Series from Transmille is the most advanced multimeter available on the market. Featuring a full colour screen, the 8100 Series offers a wide range of functionality and covers a wide range of input parameters whilst achieving break...
3.8333/5 12text_more_review
Код: 8109
PressCal Software for DWT Fluke
PressCal Software PressCal is a menu driven software program for pressure calculation and certificate generation using a deadweight tester as the pressure source. This software has been developed as a flexible working tool to make calibrat...
Код: PressCal Software
Terminal Adapter Model 956
Terminal Adapter Model 956
Our TTI range use high quality ‘Lemo’ connectors for the Pt100 inputs. This simple accessory provides 4mm Terminal Posts for the connection of bare wires, spade terminals or 4mm plugs – useful if a lot of probes are going to be used with th...
4.5000/5 2text_more_review
Код: 956
Спасибо!