-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: 7223CT-2S
Brief specifications
More details
Guildline Instruments NEW 7223CT-2S Series of Precision AC Current Transformers provides very accurate AC current measurements at high current and for high voltages. The 7223CT-2S is part of the 7223CT Series which are Commercially Available High Precision, Low and High Voltage, AC Current Instruments Capable of Measurement Accuracy <5 part-per-million (ppm) – Accuracies No Other Manufacturer Provides PRODUCT FEATURES High Precision AC Current Measurements Fixed Permanent Accuracy Measurement Accuracy <5 ppm at Power Frequencies for Both Ratio and Phase Angle Stability Measurement < 5 ppm High Voltage Isolated Measurement Capability When Used with a Suitable Insulating Bushing High Accuracy with Burdens up to 1 Ω 7223CT-2S Provides 1000:1 Transformation Ratio 7223CT-2S/HV Provides 2000:1 Transformation Ratio
7223CT-2S Series of Precision AC Current Transformers
Featured Products
The SF82 Online has been developed as a fast-response, quick-to-install hygrometer system for the complete dew-point measurement range of -60 up to +60 °C dew point, which covers many moisture measurement applications...
Filter carriers protect the humidity and temperature sensors and probes against mechanical damage. Filters act as a protective barrier against contaminants/pollutants that can influence the sensor. When choosing the correct combination of f...
The HygroFlex1 series is the latest development in inexpensive HVAC transmitters for relative humidity and temperature. The devices are equipped
with the tried-and-tested Rotronic Hygromer® IN-1 sensor and boast unbeatable value for money....
This pneumatic comparison pressure comparator is designed for testing pressure measuring instruments against master test instruments.
This cost effective instrument provides precise control for important calibration requirements and includ...
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. Safe area use 2 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...
Precision Flexible AC Current Transformer SymmProFlex® FCT 2161 is based on Rogowski principle designed to measure alternating current and to transform the measured current to standardized 5 A level...
The fundamental problem with surface temperature measurement is that it is subject to large stem conduction errors, also because heat conducted from the surface of the hot-plate causes a localised cold spot to be created which means that th...
The 3000AC provides laboratories with a fully traceable AC voltage source with accuracies in the order of 10ppm that can easily be verified with a DC voltage multimeter with accuracies in the 4ppm to 10ppm region. Using the latest in DAC te...
A panel mounted oxygen analyser with a remote sensor allows flexibility of installation. The GPR-1900 gas analyzer is suitable for trace oxygen measurements as low as 0-10 ppm; the GPR-2900 measures O2 up to 100%. The remote sensor block al...
A set for connecting measuring equipment with each other using silicone tubes (fittings, silicone tubes and adapters).
X = connection type, eg N - 1/4 NPT male, N2 - 1/2 NPT male, B - 1/4 BSP male, B2 - 1/2 BSP male, M - M20X1.5 male...
Guildline Instruments NEW 7223CT-2S Series of Precision AC Current Transformers provides very accurate AC current measurements at high current and for high voltages. The 7223CT-2S is part of the 7223CT Series which are Commercially Availabl...
If you are serious about portable temperature calibration tools, then you know a good dry well calibrator is more than just a stable heat source. The Additel 875 Series Dry Well Calibrators combine excellent performance in stability, radial...
-327x226.jpeg)
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes t...
The Additel 793 pressure controller combines the latest control/measure technology, modular design and easy to use/maintenance features into a single users friendly device. The Additel 793 provides pressure control up to 15,000 psi (1,000 B...
The Portable Test Equipment consists of an integrated three-phase current and voltage source and a three-phase electronic reference standard of accuracy class 0.05% or 0.02%...
PressCal Software
PressCal is a menu driven software program for pressure calculation and certificate generation using a deadweight tester as the pressure source. This software has been developed as a flexible working tool to make calibrat...
If you are serious about portable temperature calibration tools, then you know a good dry well calibrator is more than just a stable heat source. The Additel 875 Series Dry Well Calibrators combine excellent performance in stability, radial...
Guildline Instruments 6636 Series is a modular series of Temperature Stabilized Resistance Standards that can be rack mounted or simply set on a bench. The 6636 Series provides a logical extension to the popular 6634A series of Temperature ...
The Michell range of dew-point generators provides flexibility and control at a competitive price. Based on the volumetric mixing of dry and wet gases, the instruments can be controlled either manually or automatically to suit a wide range ...
The most used temperature for calibration is 0°C. The normal way of creating 0°C is via a mixture of ice and water in a Dewar Flask. However, this can give errors of up to 4°C because water is densest at 4°C and so as the ice melts the temp...
