-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: HC2A
Brief specifications
More details
Filter carriers protect the humidity and temperature sensors and probes against mechanical damage. Filters act as a protective barrier against contaminants/pollutants that can influence the sensor. When choosing the correct combination of filter carrier and filter there are many factors to consider. Specific conditions such as high air velocities, pollutants in the air, disinfection and cleaning routines, mechanical impacts, high bioactivity, condensation, airborne chemical contaminants and required response time are some of the many considerations.
Filters and Filter Carriers for Rotronic HC2A Humidity Probes
-Steel 1.4301, Sintered steel, Polycarbonate filter carrier
Polyethylene filter: 40-50µm, -50…100 °C; 20µm, -50…100 °C; 40µm, -50…100 °C
wire mesh filter: 10µm, -50…100 °C; 10µ, -100…200 °C; 20…25µm, -100…200 °C
Sintered steel filter: 25µm, -100…200 °C; 25µm, -100…200 °C
Teflon filter: 10µm, -80…200 °C
Featured Products
/adt762_series_dd71 (1)-327x226.jpg)
The Additel 762 Automated Pressure Calibrator is unlike any other pressure calibrator on the market. This revolutionary product is a complete turnkey solution for automation of pressure calibration work up to 15,000 PSI.
Designed for use i...
The HC2A series are digital humidity-temperature probes based on the AirChip3000 technology. These probes
feature a UART serial interface and two 0…1 V linear analog output signals.
The HC2A probes are designed for use with the HygroClip2...
The DCS system is a complete rack-mounted calibration station capable of producing a flow of air (or nitrogen) at a pre-specified range of dew-point temperatures from a minimum of -100°C (-148°F) to a maximum of +20°C (+68°F). Through custo...
These modular pressure controllers combine cutting-edge control/measurement technology, modular design, and user-friendly features. The Additel 783 controller series is optimized for high speed to pressure without compromising accuracy and ...
GUILDLINE INSTRUMENTS NEW 9333 SERIES of Air Resistance Standards are cost effective laboratory, portable or just general purpose resistance standards. They are very stable and are designed to be used across a wide temperature range. PRODUC...
Guildline Instruments 99100A Capacitance Reference System provides for ratio calibration of Capacitance Measurement Systems. The 99100A System comprises a number of highly stable hermetically sealed capacitors with a switch array and a vari...
For high pressure pneumatic calibrations this unit interfaces with hydraulic deadweight testers providing a rateless liquid-to gas separation. Driven by a pneumatic pressure source (nitrogen bottle) and controlled by needle valves, high pre...
GA21 plus
Portable gas analyser GA21 plus is a portable analyser using advanced technologies. It can be equipped with up to 8 electrochemical and NDIR sensors. The analyser has a built-in pressure sensor, large internal memory for result...
WinPrompt Calibration Software
WinPrompt calibration software increases calibration efficiency by providing full-color, Windows-based measurement for your process. This easyto-use software can be used independently or in conjunction with t...
-327x226.jpg)
Druck's UNIK5000 configurator allows you to design your own pressure sensor for your specific application. With more than 200 million configurable combinations, the UNIK5000 configurator guides you through all available options to help you ...
-327x226.jpg)
A portable automated pressure calibrator in the palm of your hand—this could be our most exciting product yet! The Additel 760 series Automatic Handheld Pressure Calibrator takes portable pressure calibration to new levels. Weighing less th...
Indoor Air Quality (IAQ) measurements in offices, conference rooms, schools, etc.
Application range: 0...50 °C / 0...95 %rh, non-condensing
CO2 Measurement principle: Infrared (NDIR) with automatic calibration (ABC)
CO2 Display Wal...
-327x226.jpeg)
Our TTI range use high quality ‘Lemo’ connectors for the Pt100 inputs. This simple accessory provides 4mm Terminal Posts for the connection of bare wires, spade terminals or 4mm plugs – useful if a lot of probes are going to be used with th...
Automation of measurements using the 8500 Low Thermal Scanner allows a completely automated measurement system to be realised. Using the 8500 Scanner together with ProGraph software and the 8000 series multimeter provides a turnkey solution...
A simple and efficient, self-contained dew-point hygrometer, with filtration and flow control, for measurement of dew point or moisture content at point of use. It uses the Easidew On-Line to measure dew point in the range –100 to + 20 °C d...
GUILDLINE INSTRUMENTS 7810 WIDEBAND TRANSCONDUCTANCE AMPLIFIER is the latest innovation for High Current, Wide Bandwidth AC Outputs. PRODUCT FEATURES 50 A and 100 A Models Calibrated Frequency Range (DC to 100 kHz) Uncalibrated 100 kHz to 2...
The HygroSmart HS3 an advanced, digital probe with measured or calculated outputs and a rugged 10 bar pressure rated housing, designed to provide reliable humidity measurement for process control in a wide range of applications. The HS3 pro...
The GPR-3500 MOVR Portable Oxygen Purity Analyzer is the only electrochemical oxygen sensor based analyzer capable of measuring 100% oxygen on a continuous 24/7 basis for the purpose of verifying the purity of medical grade oxygen transport...
Promet EExd Process Moisture Analyzers are hazardous-area rated industrial hygrometer systems for measurement of water vapor content in process gases on natural gas platforms and terminals as well as in petrochemical plants and industrial m...
The S8000 RS is a high-precision chilled mirror reference hygrometer which gives highly accurate and repeatable measurements of dew-point and humidity. It is intended for use as a reference instrument in standards laboratories and is also s...
