-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: HF1
Brief specifications
More details
The HygroFlex1 series is the latest development in inexpensive HVAC transmitters for relative humidity and temperature. The devices are equipped
with the tried-and-tested Rotronic Hygromer® IN-1 sensor and boast unbeatable value for money. The Rotronic SW21 software enables you to change
the scale, calibrate the transmitter and adjust the humidity.
Humidity Transmitter HVAC - Rotronic HygroFlex HF1
-Operating and measurement range: -20...50 °C 0...100 %RH (non-condensing)
Accuracy: type W & type D at 23°C ± 2 %RH; type S at 23°C ± 3 %RH (10...90 %RH)
Temperature precision at 23 °C: ± 0.3 °C
Outputs: 2 analog outputs 04...20 mA
Supply voltage: 12...28 VAC / 15...40 VDC
Featured Products
The 8410A Portasal™ is a portable, high precision instrument from the world leader in Salinometers. This instrument will deliver salinity calculations on-board ship with laboratory level accuracy. PRODUCT FEATURES Completely Portable Yet Of...
-327x226.jpeg)
-327x226.jpeg)
Multi Function: Six Modes including Dry Block and Liquid Bath Fast Response 35mm x 160mm Calibration Volume Calibrate Whole Measurement Loop Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probe...
RPD Gas meter box
Mobile calibration system for flow meters
Hydrogen approved
The gas meter measurement box convinces with its mobility due to the smart hard case in which our measurement unit is installed. In the test setup, this ...
GUILDLINE INSTRUMENTS 9211B PRECISION MULTI-TAP CURRENT SHUNT is an improved version of the world's most widely fielded multi-tap shunt available, the model 9211A. PRODUCT FEATURES Accuracies as Low as ± 0.01 % Now with New Style Case with ...
7750i Air Data Test Set
The Model 7750i Air Data Test Set represents the latest generation Air Data Test Set (ADTS), incorporating a unique quartz sensor having unequalled precision and long term stability with the latest pressure control ...
The Additel 100-FLT-1K is a pneumatic filter and liquid trap covering from -15 to 1,000 psi (-1.0 to 70 bar). This filter is ideal for your pneumatic measurement or calibration applications and contains an easy to use drain valve for removi...
-327x226.png)
Additel's 673 Advanced Digital Pressure Calibrators will redefine the way you want to measure and calibrate pressure readings and devices! With wireless remote connectivity, microprocessor technology, state of-the-art silicon pressure senso...
The 8370A measures and controls pressures from atmosphere to 107 MPa. It can be configured with ranges as low as 700 kPa.
Fluke Calibration’s unique control technology enables you to use these calibrators at low or high pressures, all in t...
The Additel ADT104-HP is a high-pressure adapter kit designed to support various calibration and pressure testing needs. It includes a set of 17 adapters with a 1/4HP male (Autoclave M-250-C) connection, compatible with Additel models such ...
The 3000RS is a modern precision resistance standard offering annual stabilities of better than 5ppm without the requirement for an oil bath, with temperature co-efficients as low as 0.1ppm/°C Using ultra-high precision, 4 wire hermetically...
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets.
Hazardous area use 1 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...
The next generation Advanced Quartz Crystal Microbalance analyzer from Michell Instruments is designed to provide reliable, fast and accurate measurement of trace moisture content in a variety of applications where keeping moisture to a min...
VMF® – VenturiMasterFlow®
Flow measurement of air and gases
We develop and manufacture venturi tubes and nozzles as individual components or as complete VMF® systems. The VenturiMasterFlow® measuring system, or VMF® for short, is used...
Critical / Sonic nozzles
Flow measurement elements with highest accuracy
EP Ehrler Prüftechnik manufactures sonic nozzles in the flow range from 0.005 up to 2000 m³/h. In addition to the standard range, EP Ehrler Prüftechnik offers cu...
The DPI 610 Aeronautical version is a low cost yet flexible portable calibrator for precision leak testing of aircraft pitot static systems. Configured as a single channel unit for testing either altitude or airspeed parameters, it is fully...
The HF73A transmitter series is designed for fixed installation in industrial applications where conditions are within the range of 0 to 100 %rh and -100 to 150 °C (-148 to 302 °F). The probe of the HF73A can survive exposure to temperature...
-327x226.jpeg)
-327x226.jpeg)
Fast-Cal – the product range you designed During early 2004 20 experienced engineers from many parts of the world were asked to produce their ideal specification for industrial calibration. Their top ten requirements, in order of priority, ...
-327x226.jpg)
At Additel, innovation and continuous improvement are part of our company's culture and the products we introduce. When we set out to deliver the Additel 761A series calibrators, we knew we needed to provide breakthrough improvements and ad...
Precision Flexible AC Current Probes SymmProFlex® FCP 3121 and FCP 3321 are current probes based on Rogowski principle designed to measure alternating current up to 3000 A, 6000 A, 12000 A or more. Current Probes SymmProFlex® FCP 3121 (sing...
-327x226.jpg)
The 927 Hydraulic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 85% vacuum to 10,000 psi (700bar). With the patented screw press technology, high pressures can be easily generated, as well as increas...
