-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: Condumax II Trans
Brief specifications
More details
Transportable hydrocarbon dew-point analyzer system for field-measurements in natural gas. Suitable for IEC Zone 1 or 2 hazardous area, NEC Class I, Division 1 Groups B, C, D.
A complete transportable natural gas dew-point analysis system for field spot-check measurements. Periodic online operation when located in a temperature maintained analyzer house. Measurements and functionality are instantly accessible through integrated alphanumeric display and touch-glass HMI interface including log of dew-point readings for operator review.
Hydrocarbon Dew Point Analyzer - Condumax II Transportable
- Designed for Easy Mobile Hydrocarbon Dew-Point Checks
- Features
-
- Field transportable self-contained dew-point analyzer system
- Simultaneous HC and water dew-point measurements in a single analyzer
- Automatic objective measurements by industry proven principles
- Parameter specific sensors ensure continuity of HC and water dew-point readings
- Self-contained sample handling, conditioning and analysis package
- 0.5°C HC dew-point accuracy
- Fundamental cooled mirror principle
Featured Products
This pneumatic comparison pressure comparator is designed for testing pressure measuring instruments against master test instruments.
This cost effective instrument provides precise control for important calibration requirements and includ...
-327x226.jpeg)
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes t...
Critical / Sonic nozzles
Flow measurement elements with highest accuracy
EP Ehrler Prüftechnik manufactures sonic nozzles in the flow range from 0.005 up to 2000 m³/h. In addition to the standard range, EP Ehrler Prüftechnik offers cu...
The microK 70 and 125 models are designed for the Primary Temperature Laboratories whilst the microK 250 and 500 models were designed for the Secondary Laboratory as well as a wide range of high accuracy industrial and scientific calibratio...
GasPro – Mobile gas sampler
Representative cyclical gas sampling to determine gas quality in the gas network.
Analysing the gas quality in the gas network is essential to monitor technical specifications and ensure correct billing. Th...
We understand the many challenges associated with thermocouple calibration work. That is precisely why we decided to introduce the ADT875-1210 and ADT878-1210 Thermocouple Calibration Furnaces. With an unmatched stability, uniformity and an...
The International Recognized Calibration Standard for Salinometers The International Association for Physical Sciences of the Ocean (IAPSO) Standard Seawater manufactured by Ocean Scientific International (OSIL) is available in North Americ...
The 9000A series range of multiproduct calibrators offers the widest workload of any calibration system presently available. The 9000A series provides all of the functionality of the 3000A series multiproduct calibrator in a dedicated rugge...
-327x226.jpg)
Additel takes temperature calibration to the next level with the ADT878 reference dry block calibrators. If you're looking for the best dry-block calibrator on the market, you've found it! Additel's commitment to continuous improvement, qua...
-327x226.jpg)
DPI 800/802 Druck Pressure Indicator/Loop Calibrator The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular proce...
Software Package ELMA is dedicated for electricity meter testing and calibration. The package contains routines for control of hardware, data acquisition, evaluation of measurements, meter data exchange, output of documents, data archiving,...
Are you fed up with cold wet hands, and hours of frustration when you produce an ice mantle in your Triple Point Cell? Change your life and try the Isotech Ice Mantle Maker. It works by using a specially designed anti-gravity heat pipe. The...
USB to RS 232 cable Connects the DPI620G to an RS 232 interface (not compatible with DPI620G-IS)...
-327x226.jpg)
The 670SQ is our latest thermometer, to be specifically designed to give optimum performance up to the aluminium point. Its construction permits the four internal platinum lead wires to expand and contract in the same manner as those of sil...
-327x226.jpg)
-327x226.jpg)
The Druck DPI 705E Series of handheld pressure manometers and optional temperature indicators combine tough and rugged design with accurate and reliable measurements.
Compact and robust, the DPI 705E Series is designed for single-handed op...
-327x226.jpg)
-327x226.jpg)
The 920 and 920HV High Pressure Test Pumps are hand operated pressure pumps designed to generate pressure from 95% vacuum to 3,000psi (200bar). With a long lever, it just takes 40 seconds to reach 3,000 psi (200 bar). A high-quality screw p...
The 12X series pressure manifolds are designed for expanding pressure test ports during pressure calibration.
The Additel 121 pressure manifold is used for pneumatic pressure calibration up to 3,000 psi (200bar), while the Additel 123 mani...
ProCal-Track provides tools for the management of instruments from goods inwards through to despatch and all points in between. ProCal-Track can be used independently of ProCal, or can be integrated for full laboratory automation. Ease of u...
GUILDLINE Instruments 6530 TeraOhm Bridge-Meter Series is the latest innovation in High Resistance and Ultra-High Resistance Measurements. These Bridge-Meters incorporate the latest technology for high resistance measurements providing Metr...
-327x226.jpeg)
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories ar...
