-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: XZR200
Brief specifications
More details
The XZR200 Oxygen Analyzer is suitable for measuring in oxygen closed systems, such as ventilation pipes and boiler exhaust flues.
A cost effective zirconium-dioxide analyzer to measure percentage level oxygen in combustion processes, ambient air monitoring and many more applications. The unit is configurable to measure either 0-25% or 0-100% oxygen and offers manual or automatic calibration to suit the customer’s needs. Two probe lengths are available (210mm & 400mm).
Typical applications include; combustion control of industrial boilers, burning oil, gas, coal or biomass; incubators; composting probes and welding equipment.
Cost-Effective Oxygen Analyser for Combustion - OXY-FLEX Series
- Long-Life, Non-Depleting Oxygen Measurement
- Features
-
- Configurable outputs: 4-20 mA and 0 to 10 V DC or RS232 comms interface
- Cycling 3.3 V DC logic output allows direct monitoring of the O2 sensor for diagnostic purposes
- Can be calibrated in normal air (20.7% O2) or in any other known O2 concentration
- Selectable output filtering allows fast and dynamic or slow and stable output
- Externally triggered automatic or manual calibration
- Diecast aluminium case IP65 with stainless steel probe
- Sample temperature up to +400°C
Featured Products
4610M DC VOLTAGE 0 - ±1025V DC CURRENT 0 - 30A AC VOLTAGE 2mV - 1000V, 10Hz - 1MHz AC CURRENT 20uA - 30A, 10Hz - 30kHz RESISTANCE (PASSIVE) 0 Ohms - 1 GOhm CAPACITANCE (PASSIVE) 1nF - 10uF FREQUENCY 10Hz - 1MHz TEMPERATURE (THERMOCOUPLE) J ...
Measuring and Monitoring differential Pressure in Clean Rooms, Food and Pharma. Choice of two different sensor technologies (thermal measuring method and diaphragm sensor)
The new differential pressure transmitters PF4 and PF5 with two dif...
The Model 2465 Gas Piston Gauge has a long history of serving national standards laboratories, commercial industry and government organizations as a primary pressure standard for over 40 years. Since its original introduction, enhancements ...
The Fluke Calibration 700HPPK Pneumatic Test Pump Kit generates and adjusts pneumatic pressures up to 21 MPa (3000 psi), without requiring a nitrogen bottle or other external pressure supply. It supplies pressure to devices under test (DUTs...
Precision Flexible AC Current Probes SymmProFlex® FCP 3121 and FCP 3321 are current probes based on Rogowski principle designed to measure alternating current up to 3000 A, 6000 A, 12000 A or more. Current Probes SymmProFlex® FCP 3121 (sing...
Software Designed to be used in conjunction with the 8000 Precision Multimeter Series and 8500 Low Thermal Scanner, ProGraph provides an instant solution for graphing stability, temperature and many other parameters. ProGraph is a 'plug and...
RPD Gas meter box
Mobile calibration system for flow meters
Hydrogen approved
The gas meter measurement box convinces with its mobility due to the smart hard case in which our measurement unit is installed. In the test setup, this ...
These thermocouples are suitable for use as references in Isotech Dry Blocks and for use with temperature indicators. Details of our laboratory grade Standard Thermocouples with separate cold junctions can be found in our publication “Solut...
The HC2A series are digital humidity-temperature probes based on the AirChip3000 technology. These probes
feature a UART serial interface and two 0…1 V linear analog output signals.
The HC2A probes are designed for use with the HygroClip2...
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets.
Hazardous area use 1 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...
SMF® – SonicMasterFlow®
Highly precise flow measurement of gases and air
The SMF® – SonicMasterFlow® series are calibration systems for high-precision flow measurement of air and other gases (optional) (volume and mass flows) using cr...
USB to RS 232 cable Connects the DPI620G to an RS 232 interface (not compatible with DPI620G-IS)...
In many situations it can be very useful to measure water activity at goods-in, production or storage rooms, e.g. inspection of bulk materials to ensure they meet specifications...
The DPS5000 I2C from Druck, part of the UNIK5000 family, offers integrated digital electronics to enhance the performance level of the UNIK5000 Pressure Sensing Platform to levels unmatched by traditional analog sensors. It features an I2C ...
With Additel/Land software, you may download test results stored in the internal memory of Additel calibrators to a PC, and export the results to an excel file. It is a free software package...
The Easidew PRO I.S. intrinsically safe dew-point transmitter measures moisture in demanding process and refinery applications in either gases or non-polar liquids.
It offers a wide measurement range of –110 to +20°Cdp, is easily integra...
Model 17402B Gallium Apparatus is not an adaptation from general purpose equipment, but is designed specifically to realize and maintain the Gallium Cell on the melt plateau, for calibration of thermometers on the International Temperature ...
/adt762_series_dd71 (1)-327x226.jpg)
The Additel 762 Automated Pressure Calibrator is unlike any other pressure calibrator on the market. This revolutionary product is a complete turnkey solution for automation of pressure calibration work up to 15,000 PSI.
Designed for use i...
Connect the 2090 via RS232 connection (USB to RS232 adapter available) to a computer to automate any task performed by a decade resistance box to automate calibration or ATE tasks. Providing a basic accuracy of up to 0.1% (0.01% accuracy op...
