Каталог
Назад

Tek Know Ukraine

Solution for metrology

With us expertly :)

Oxygen Analyzer - Michell XTP601

- Low Maintenance O2 Measurement

- Features

-

- General purpose or ATEX, IECEx, CCSAUS, TC, TR & Ex hazardous area certified models

- Meets the requirements of IEC61508 SIL 2

- Ranges available: 0–0.5% up to 0–50% & 20, 80 or 90–100%

- Touch-screen display allows calibration or adjustment without the need for a hot works permit

- Intrinsic error (accuracy) is better than 1% full scale

- Zero span stability better than 0.25% of span per month

- Outputs include RS485 and two 4-20mA (following NAMUR NE 44 standard)

- Low cost of ownership due to minimal maintenance and no consumable parts

Brief specifications


More details

The XTP601 Oxygen Analyzer for safe or hazardous areas is a robust, linear and stable device that is used for measurements in gases such as biogas, methane, hydrogen, nitrogen or carbon dioxide. The analyzer meets the requirements of IEC61508 SIL2.

A robust, linear and stable oxygen analyzer for measurements in gases such as hydrogen, nitrogen, methane, biogas, or carbon dioxide. The analyzer is housed in an IP66 rugged casing, making it suitable for a wide range of applications. The XTP601 can be supplied with flame arrestors, as either explosion-proof and certified for use in hazardous areas or for use with flammable gases in a safe area.


ВимірюванняГенерація (Імітація)


Oxygen Analyzer - Michell XTP601

- Low Maintenance O2 Measurement

- Features

-

- General purpose or ATEX, IECEx, CCSAUS, TC, TR & Ex hazardous area certified models

- Meets the requirements of IEC61508 SIL 2

- Ranges available: 0–0.5% up to 0–50% & 20, 80 or 90–100%

- Touch-screen display allows calibration or adjustment without the need for a hot works permit

- Intrinsic error (accuracy) is better than 1% full scale

- Zero span stability better than 0.25% of span per month

- Outputs include RS485 and two 4-20mA (following NAMUR NE 44 standard)

- Low cost of ownership due to minimal maintenance and no consumable parts

Featured Products

ADT681 Digital Pressure Gauge
ADT681 Digital Pressure Gauge
DISCONTINUED. RECOMMENDED REPLACEMENT ADT681A With advanced microprocessor technology and state-of-the-art silicon pressure sensors, the 681 series digital pressure gauges provide an accurate, reliable, and economic solution for a wide r...
Код: ADT681
P3000 Pneumatic Deadweight Testers
P3000 Pneumatic Deadweight Testers
The P3000 Series is the culmination of over 50 years of experience in the production and design of high performance pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation ...
Код: P3000
DG2, DG3, DG4 and VDS3 - Michell Dew-Point Generators
DG2, DG3, DG4 and VDS3 - Michell Dew-Point Generators
The Michell range of dew-point generators provides flexibility and control at a competitive price. Based on the volumetric mixing of dry and wet gases, the instruments can be controlled either manually or automatically to suit a wide range ...
Код: DG
Model 471 Simple Argon Apparatus
Model 471 Simple Argon Apparatus
The Isotech Argon Triple Point Apparatus is a robust, simple to use and affordable solution for the realisation of the argon triple point. Many laboratories use liquid nitrogen comparators which are convenient and can be low cost but the ni...
3.5000/5 6text_lot_review
Код: 471
IO620-IDOS-USB IDOS to USB converter
IO620-IDOS-USB IDOS to USB converter
IDOS to USB converter Allows connection of an IDOS universal pressure module to the DPI620G. P/N IO620-USB-PC is also required to connect the converter to the DPI620G USB port. (not compatible with DPI620G-IS)...
Код: IO620-IDOS-USB
P3800 Hydraulic Deadweight Testers
P3800 Hydraulic Deadweight Testers
The Pressurements P3800 Series is the culmination of over 50 years experience in the design and manufacture of primary pressure standards. With features and options designed to improve accuracy, increase reliability, and simplify operation,...
Код: P3800
HW5 Software for Rotronic Humidity Transmitters
HW5 Software for Rotronic Humidity Transmitters
Rotronic’s new software generation HW5 replaces the long-time and successful HW4 software. The HW5 will be available as Professional version for free (with no device limitations)...
Код: HW5
Drago 4934
Drago 4934
Need advice on which model? Dry Block Selection Guide The Hyperion and Drago have large calibration volumes, 65mm x 160mm deep, which makes them ideal to use as portable liquid baths. Stirred liquid baths are suitable for temperature sensor...
Код: 4934
Michell Condumax II and OptiPEAK TDL600 Dew-Point Analyzer
Michell Condumax II and OptiPEAK TDL600 Dew-Point Analyzer
Hydrocarbon dew point (HCDP) and moisture are key quality parameters to ensure the quality of pipeline transmission gas. With the combined Condumax II and OptiPEAK TDL600 analyzer system pipeline operators have the assurance of the most wid...
Код: TDL600 Dew-Point
3200B BENCHTOP electrical test equipment calibrator
3200B BENCHTOP electrical test equipment calibrator
The industry leading 3200B series provides by far the fastest and safest solution for calibration of Loop, RCD, PAT's and insulation testers. By using the 3200B series, calibration time can be drastically reduced, while superior accuracy me...
2.8571/5 7text_lot_review
Код: 3200B
IAPSO P35 Standard Seawater and Salinity Packs
The International Recognized Calibration Standard for Salinometers The International Association for Physical Sciences of the Ocean (IAPSO) Standard Seawater manufactured by Ocean Scientific International (OSIL) is available in North Americ...
Код: P35
IOHOSE-NP1 Pneumatic hose
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. Safe area use 1 m/3.28 ft pneumatic hose. Maximum pressure 20 bar/300 psi...
Код: IOHOSE-NP1
DPI705E Handheld manometer
DPI705E Handheld manometer
The Druck DPI 705E Series of handheld pressure manometers and optional temperature indicators combine tough and rugged design with accurate and reliable measurements. Compact and robust, the DPI 705E Series is designed for single-handed op...
Код: DPI705E
66252 DCC Resistance Bridges
The 66252 DMM Switch is a unique option for 6625A Resistance Measurement Systems. This very high isolation switch allows the 6625A System Resistance Standards to be used for both Measurement and Source Applications without having to disconn...
Код: 66252
PV212 Hydraulic Pressure Test Pump
PV212 Hydraulic Pressure Test Pump
The PV212 is a high-quality hand pump designed to quickly and easily generate hydraulic pressures. The construction materials make it compatible with most fluid media and an optional seal kit can be supplied for many applications. The built...
Код: PV212
7223CT-2S Series of Precision AC Current Transformers
7223CT-2S Series of Precision AC Current Transformers
Guildline Instruments NEW 7223CT-2S Series of Precision AC Current Transformers provides very accurate AC current measurements at high current and for high voltages. The 7223CT-2S is part of the 7223CT Series which are Commercially Availabl...
Код: 7223CT-2S
HPPP480 Calibration system for gas meters with natural gas
HPPP480 Calibration system for gas meters with natural gas The calibration system serves as a standard for the calibration of gas meters of natural gas. The supply of natural gas occurs directly from a pipeline. The gas used for calibrat...
Код: HPPP480
Dryers for Humidity Calibration Systems - PSD2 and PSD4
Pressure Swing dryers provide a source of very dry compressed air for use as a zero gas in humidity calibration systems, or for general laboratory applications. The Michell PSD Series Pressure Swing Dryers use two columns filled with 4Å mo...
Код: PSD2,4
Heavy Duty Transmitter Temperature and Humidity - Rotronic HF73A
Heavy Duty Transmitter Temperature and Humidity - Rotronic HF73A
The HF73A transmitter series is designed for fixed installation in industrial applications where conditions are within the range of 0 to 100 %rh and -100 to 150 °C (-148 to 302 °F). The probe of the HF73A can survive exposure to temperature...
Код: HF73A
XGA301 Industrial Gas Analyzer
XGA301 Industrial Gas Analyzer
The XGA301 Industrial gas analyzer from Michell Instruments provides a convenient platform to measure oxygen, dew point, CO2 and CH4. The analyzer can be supplied in one of two bench-mounted chassis and with up to three sensors fitted. Sta...
Код: XGA301
Спасибо!