-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: QMA6010
Brief specifications
More details
The QMA601 Process Moisture Analyzer provides highly reliable, fast and accurate measurement of moisture content in a wide variety of carrier gases. It has a lower detection limit of 0.1 ppmV with reliable accuracy at sub-ppm trace moisture levels. Using Michell’s latest developments in Quartz Crystal Microbalance technology the analyzer measures moisture levels effectively even in gases with changing background compositions. It is fully certified for use in hazardous areas.
The QMA601 requires only minimal routine maintenance to ensure low cost of ownership. It features an intuitive ‘through the glass’ touch screen interface which is both easy to use and also means that the analyzer can be interrogated and configured without the need for a hot works permit.
QMA601 is suitable for use with natural gas containing up to 20% hydrogen with no further modification required.
Process Moisture Analyzer - Michell QMA601
- Measurement range: 0.1...2000ppmV
- Accuracy: ±10% of reading from 1 to 2000ppmV
- ±0.1ppmV between 0.1 & 1ppmV
- Inlet pressure: 2 barg
- Sample flow: 300ml/min total flow
- Analog signals: 2 x 4...20 mA or 1...5 V (selectable)
- Maximum load resistance 500 Ω for 4...20 mA and minimum load of 1M Ω for 1–5 V Digital communications: RS485 ModBus RTU Modbus TCP
Featured Products
The Isothermal range of Thermocouple Standards are the result of many years development. The type R and S standards will cover the range from 0°C to 1600°C. The measuring assembly comprises a 7mm x 300mm or 600mm gas tight 99.7% recrystalli...
A high pressure hydraulic hose rated to 1,000 bar (15,000 psi) and terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. The hose is self sealing to avoid leakage...
Manual pneumatic pumps Ralston DCAP are reliable tools for precise pressure calibration, designed to perform in a wide range of environments. With their straightforward and intuitive design, these pumps are an ideal choice for both laborato...
PPC4 is a stand-alone pressure controller intended for precision setting and control of gas pressure into a closed volume as is commonly needed for the calibration and testing of pressure measuring instruments. It has been designed to provi...
-327x226.jpeg)
-327x226.jpeg)
Isotech first introduced the Model 988 to assist in relation to the SARS outbreak during the early 2000s. Used to increase the accuracy of thermal imagers being used to measure human skin temperature in temperature screening of applications...
The GPR-1800 series of intrinsically safe trace oxygen analyzers are designed for use in demanding process environments where the low detection limit down the AII’s industrial oxygen sensors can be well utilized. Typical for Analytical Indu...
PM200 Pressure Measurement Modules
Key features:
- 0.02% FS specification makes it ideal for calibrating or testing pressure dial gauges, lower accuracy transmitters, or pressure switches.
- Rugged silicon pressure sensor design allo...
The Additel 100-FLT-1K is a pneumatic filter and liquid trap covering from -15 to 1,000 psi (-1.0 to 70 bar). This filter is ideal for your pneumatic measurement or calibration applications and contains an easy to use drain valve for removi...
Additel ACal (9530) is a powerful software package designed for varying degrees of automation of calibrations and management of your laboratory. ACal combines pressure and temperature instrument calibration automation features with laborato...
-327x226.jpg)
The Druck PACE1000 precision pressure indicator brings together the latest measurement technology to offer an elegant, fast, flexible and economical solution to pressure measurement for test, calibration and monitoring. PACE employs digital...
The ADTS554F air data test set is a portable four-channel flightline pitot static tester. In three-channel mode, it provides pitot static air data validation, leak testing, fault-finding and avionics instrumentation testing for any aircraft...
The MP100A is a combined humidity and temperature probe designed primarily for meteorological and general outdoor applications. Operation from DC voltage and low power consumption make the MP101A particularly suitable for operation at remot...
RPD Gas meter box
Mobile calibration system for flow meters
Hydrogen approved
The gas meter measurement box convinces with its mobility due to the smart hard case in which our measurement unit is installed. In the test setup, this ...
-327x226.jpg)
The Pneumatic Druck PACE5000 / PACE6000 Modular Pressure Controllers bring together the latest control and measurement technology to offer an elegant fast flexible and economical solution to pressure control for automated production, test a...
-327x226.jpg)
The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innova...
-327x226.jpg)
The Additel 286 Multifunction Reference Thermometer Readout is an industry first We have combined the capabilities of a high-end reference thermometer with a highly capable data acquisition system and 8.5 digit multimeter. The ADT286 is cap...
The HC2-A extension cables extend the HC2-A probes away from transmitters, handheld instruments or data loggers and data loggers. The HC2-A extension cables can be used up to 5 meters...
-327x226.jpg)
Pressure relief valve When fitted to a PV62X pressure station a relief valve protects the PM620 pressure module and the device under test from overpressure...
The Additel ADT103 is a versatile adapter kit designed for precision and ease of use in pressure calibration tasks. It includes hand-tight quick connectors compatible with various male and female thread types such as NPT, BSP, and metric co...
The most used temperature for calibration is 0°C. The normal way of creating 0°C is via a mixture of ice and water in a Dewar Flask. However, this can give errors of up to 4°C because water is densest at 4°C and so as the ice melts the temp...
