Каталог
Назад

Tek Know Ukraine

Solution for metrology

With us expertly :)

AII GPR-1100 Portable PPM Oxygen Analyzer

-Accuracy: < 2% of FS range under constant conditions

Analysis Ranges: 0-10, 0-100, 0-1000 PPM, 0-1%, 0-25% (CAL) FS Auto-ranging or manual lock on a single range

Application: Oxygen analysis in inert, helium, hydrogen, mixed and acid (CO2) gas streams

Area Classification: General purpose or Certified for use hazardous areas (Class I, Division 1, Groups C, D)

Controls: Water resistant keypad; menu driven range selection, calibration and system functions

Not flow sensitive

Pressure: Inlet - regulate to 5-30 psig to deliver 2 SCFH flow; vent – atmospheric

Power: Rechargeable battery, 60 day cycle

Sensor Model: GPR for non-acid (CO2) gas streams; XLT for gas mixture with > 0.5% CO2

Temp. Range: 5ºC to 45ºC (GPR sensor), -10º to 45ºC (XLT sensor)

  • AII GPR-1100 Portable PPM Oxygen Analyzer
Brief specifications


More details

Suitable for trace oxygen measurements from 0.1 ppm through to purity applications at 100% oxygen, these rugged portable instruments share the same advanced sensor technology as the online process oxygen analyzers ensuring confidence in their reliability and accuracy.

 

The Analytical Instruments concept of using the same HMI and menu structures for portable and online analyzers makes it extremely easy for operators to use both types of instruments on their site without need for extra training.


ВимірюванняГенерація (Імітація)


AII GPR-1100 Portable PPM Oxygen Analyzer

-Accuracy: < 2% of FS range under constant conditions

Analysis Ranges: 0-10, 0-100, 0-1000 PPM, 0-1%, 0-25% (CAL) FS Auto-ranging or manual lock on a single range

Application: Oxygen analysis in inert, helium, hydrogen, mixed and acid (CO2) gas streams

Area Classification: General purpose or Certified for use hazardous areas (Class I, Division 1, Groups C, D)

Controls: Water resistant keypad; menu driven range selection, calibration and system functions

Not flow sensitive

Pressure: Inlet - regulate to 5-30 psig to deliver 2 SCFH flow; vent – atmospheric

Power: Rechargeable battery, 60 day cycle

Sensor Model: GPR for non-acid (CO2) gas streams; XLT for gas mixture with > 0.5% CO2

Temp. Range: 5ºC to 45ºC (GPR sensor), -10º to 45ºC (XLT sensor)

Featured Products

ADT161 Intelligent Digital Pressure Modules
ADT161 Intelligent Digital Pressure Modules
With advanced microprocessor technology and state-of-the-art silicon pressure sensors, Additel’s 161 and 161Ex series Digital Pressure Modules provide an accurate, reliable, and economic solution for wide range of pressure applications. Our...
Код: ADT161
Precision Electronically Compensated Voltage Transformer CMR-U
Other Features The Common Mode Rejecter (CMR) is an electronically compensated uncoupling unit for elimination of interaction of simultaneously tested electricity meters having interconnected current and voltage circuits (closed I-P links)....
Код: CMR-U
Weather Shields - Rotronic AC Series
Weather Shields - Rotronic AC Series
Naturally ventilated shields are used where the natural ventilation (wind) suffices, e.g. measurement stations in the mountains...
Код: AC
6622A Series
6622A Series
Guildline Instruments 6622A Series has unique technology and provides the best in measurement uncertainties for Direct Current Comparator (DCC) Resistance Bridges. PRODUCT FEATURES Widest Available Range from 1 mΩ ~1 GΩ Best Accuracy: ± 0.0...
Код: 6622A
Standard Thermocouple Model 1600
Standard Thermocouple Model 1600
The Isothermal range of Thermocouple Standards are the result of many years development. The type R and S standards will cover the range from 0°C to 1600°C. The measuring assembly comprises a 7mm x 300mm or 600mm gas tight 99.7% recrystalli...
Код: 1600
IO620-CASE-1 Carrying case
IO620-CASE-1 Carrying case
Carrying case Protective carrying case with belt loop, shoulder strap and large detachable pocket for test leads and accessories...
Код: IO620-CASE-1
GPR-28
GPR-28
The GPR-35, GPR-2500 SN and GPR-2800 IS/AIS-S are reliable oxygen deficiency monitors for measuring the oxygen concentration in rooms where there is potential for gas leaks to prevent oxygen depletion or asphyxiation and ensure safety of pe...
Код: GPR-28
Parallel Tube Liquid Bath Libra Model 785M
Parallel Tube Liquid Bath Libra Model 785M
Isotech calibration baths employ sophisticated designs to ensure calibration to the smallest of uncertainties. In 1986 Isotech purchased the interests of H N Irving & Sons Temperature division which had specialised in providing high quality...
Код: 785M
Trace Moisture Transmitter - Michell Pura
Trace Moisture Transmitter - Michell Pura
This small transmitter is a rugged, self-contained hygrometer for the measurement of trace moisture content in ultra-high purity gases. Simple to use and install, the Pura is available in 2-wire, 3-wire and hazardous area versions and is f...
Код: Pura
3000HR precision resistance standard precision references and standards
3000HR precision resistance standard precision references and standards
The 3000HR provides a traceable source for high voltage resistance, consisting of a buildup box of 1 GOhm and 10 Gohm resistors, allowing a buildup to 100 Gohm. High value resistance standards are required by many laboratories for calibrati...
5.0000/5 2text_more_review
Код: 3000HR
Orion Model 796H
Orion Model 796H
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes t...
Код: 796H
IO620-CHARGER External battery charging station
IO620-CHARGER External battery charging station
This external battery charging station allows a spare battery to be charged independently of the DPI620G for minimum instrument down time. Power is provided by the standard mains adaptor (P/N I0620-PSU). A complete charge cycle takes approx...
Код: IO620-CHARGER
Icarus
Icarus
Download Icarus – Evaluation Download Icarus Data Sheet Download Software Guide Icarus is designed to calculate and display the relationship between resistance and temperature for Standard Platinum Resistance Thermometers between the triple...
Код:
IO620-HOSE-P1-IS Pneumatic hose in hazardous area use
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. Hazardous area use 1 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...
Код: IO620-HOSE-P1-IS
4857 Gemini 550
4857 Gemini 550
Need advice on which model? Dry Block Selection Guide The Gemini range of Dry Blocks have high capacity allowing a large number of probes to be calibrated together. They are also suitable to accept large diameter probes with the block volum...
Код: 4858
6645Q Quantum Hall System
Guildline's 6645Q Quantum Hall System has been designed and developed to meet the needs of Standards Laboratories around the world for an improved level of accuracy in the calibration and maintenance of primary resistance standards. PRODUCT...
Код: 6645Q
OEM Transmitter Temperature and Humidity - Rotronic XB32A
OEM Transmitter Temperature and Humidity - Rotronic XB32A
The XB32A OEM transmitter consists of a cable probe and PCB without housing. Thanks to its compact size, high accuracy and various selection possibilities, the transmitter can be adapted to customer wishes and used practically everywhere...
Код: XB32A
6624CT-3000 DC High Current Transformer
6624CT-3000 DC High Current Transformer
Guildline's 6624CT-3000 DC High Current Transformer provides very accurate DC current measurements up to 3000 Amperes. The direct current transformer is designed with an open window to pass a single cable, set of cables, or buss bar that ca...
Код: 6624CT-3000
Stirred Ice Bath Model 813
Stirred Ice Bath Model 813
The most used temperature for calibration is 0°C. The normal way of creating 0°C is via a mixture of ice and water in a Dewar Flask. However, this can give errors of up to 4°C because water is densest at 4°C and so as the ice melts the temp...
Код: 813
DCAP Pneumatic Scissor Hand Pumps
DCAP Pneumatic Scissor Hand Pumps
Manual pneumatic pumps Ralston DCAP are reliable tools for precise pressure calibration, designed to perform in a wide range of environments. With their straightforward and intuitive design, these pumps are an ideal choice for both laborato...
Код: DCAP
Спасибо!