-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: CDP301
Brief specifications
More details
CDP301 portable HCDP tester uses the chilled mirror principle for both hydrocarbon and water dew point measurements and is designed to follow the requirements as described in ASTM D1142. Based on the visual manual method of observing the formation of condensate, the CDP301 uses a high-definition visual image to assist users and allows image capture and reliable logging of measurements for later review.
Portable Dew-Point Tester – Michell CDP301
- Chilled mirror technology with process visualization
- Accuracy: ± 0.5 ° C
- Measuring range Δ >65°C from hygrometer temperature
- Nominal working pressure 100 barg
- Ambient temperature: -30°C...+50°C
- 5" high definition color display
- Certificate Exd IECEx ATEX zone 1 IIB+H2 T3
Featured Products
Operate confidently in cold environments, even as low as -29°C. The ruggedly designed Model 786 takes laboratory level performance into the harshest of environments.
Unlike other calibrators that cannot be used in the extreme cold, the 7...
-327x226.jpeg)
First introduced to assist in relation to the SARS outbreak during the early 2000s the Model 988 is now helping in relation to coronavirus. It can be used to increase the accuracy of thermal imagers being used to measure human skin temperat...
-327x226.jpeg)
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes t...
GUILDLINE INSTRUMENTS GL 1010 SERIES of Resistance Transfer Standards are very stable and low uncertainty calibration laboratory standards for customers looking to replace the old ESI 1010 series. PRODUCT FEATURES Transfer Accuracy better t...
A panel mounted oxygen analyser with a remote sensor allows flexibility of installation. The GPR-1900 gas analyzer is suitable for trace oxygen measurements as low as 0-10 ppm; the GPR-2900 measures O2 up to 100%. The remote sensor block al...
Success in motorsport depends on hundreds of components working together under extreme conditions, and Baker Hughes continues to develop Druck pressure transducers that give the ultimate performance. Druck motorsport sensors have become a w...
-327x226.jpg)
Affordable Single Zone Furnace Simple Operation For Indium, Tin and Zinc Cells The Isotech Low Temperature Fixed Point Furnace is designed specifically to realize and maintain the freeze plateaux of Isotech Indium, Tin and Zinc Fixed Point ...
0-25% FS ranges
Accuracy < 2% of range at constant conditions
Advanced Sensor Technology:
• Long Life Sensor, Low maintenance with typically 32 months oxygen sensor life
• Extended Operating Range
• Sensitivity 0.5% Full Scale
No Fals...
BHGE is the foremost supplier of air data test systems, with over 25 years experience in the design and manufacture of advanced pressure measuring instruments and sensors. The ADTS 405 is a series of reliable, high accuracy, air data test s...
-327x226.jpeg)
The Oceanus-6 PLUS has all the advantages of the Isocal-6 models but with a substantially larger calibration volume, 50mm diameter by 300mm deep. The Oceanus-6 can be used as a Dry Block, a Liquid Bath, a Blackbody Source for infrared therm...
-327x226.jpeg)
Isotech’s Quick Cal range of testers are ideally suited to the less exacting applications where our larger, better specified baths are unnecessary. The Low Temperature Quick Cal covers the temperature range of -12°C to +140°C, making it ide...
Transportable hydrocarbon dew-point analyzer system for field-measurements in natural gas. Suitable for IEC Zone 1 or 2 hazardous area, NEC Class I, Division 1 Groups B, C, D.
A complete transportable natural gas dew-point analysis system ...
Other Features The CMR-I 2x30 is equipped with Load Monitoring, Protection Circuits and Load Bypass via serial remote control. The CMR-I can be implemented into any existing test system with negligible additional power losses. Current ratio...
Precision Flexible AC Current Probes SymmProFlex® FCP 2x21 are based on Rogowski principle designed to measure alternating current. Current Probes SymmProFlex® FCP 2x21 series can be used as AC current sensors for multimeters, scopemeters, ...
Guildline Instruments 9340-4T Series of precision RTD Simulators and DC Resistance Standards are a complete family of easy to use low to ultra-low, 4 Wire resistance standards offering the best combination of accuracy and resistance range t...
The P3000 Series is the culmination of over 50 years of experience in the production and design of high performance pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation ...
The XTP601 Oxygen Analyzer for safe or hazardous areas is a robust, linear and stable device that is used for measurements in gases such as biogas, methane, hydrogen, nitrogen or carbon dioxide. The analyzer meets the requirements of IEC615...
This instrument has now been replaced by the superior milliK Precision Thermometer The TTI-7 PLUS is a very high accuracy multi purpose digital thermometer for both platinum resistance thermometers and thermocouples. Laboratory users will w...
The 9000A series range of multiproduct calibrators offers the widest workload of any calibration system presently available. The 9000A series provides all of the functionality of the 3000A series multiproduct calibrator in a dedicated rugge...
ProWeb enables creation of an online database of certificates in PDF format that can be accessed through a web portal. Enable simple access to historical certificates for both yourself and your customers, with password protected logins and ...
