-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: PDCR/PMP
Brief specifications
More details
Success in motorsport depends on hundreds of components working together under extreme conditions, and Baker Hughes continues to develop Druck pressure transducers that give the ultimate performance. Druck motorsport sensors have become a world-leading product line used in Formula 1, World Rally Championship, and the Indy Racing League, amongst others. The 4300 & 4400 Series are the latest in the range of products that for many years have been “fine-tuned” in design to suit all chassis and engine pressure measurement requirements. 4300 Features: - Pressure Range: 1.6 bar (25psi absolute) up to 250 bar absolute or sealed gauge (3,625psi) - Operating Temperature Range: from -30°C to +175°C (-22°F to 347°F) - Voltage Outputs: mV or voltage outputs - Accuracy: to ±0.1% Full Scale (FS) Best Straight Line (BSL) - Construction: 17.5mm diameter stainless steel or titanium construction - Frequency response: to 3.5 kHz - 2x over pressure capability
Документация
PDCR/PMP 4300 Series High-Temp Pressure Transducers
- Pressure Range: 1.6 bar (25psi absolute) up to 250 bar absolute or sealed gauge (3,625psi)
- Operating Temperature Range: from -30°C to +175°C (-22°F to 347°F)
- Voltage Outputs: mV or voltage outputs
- Accuracy: to ±0.1% Full Scale (FS) Best Straight Line (BSL)
- Construction: 17.5mm diameter stainless steel or titanium construction
Featured Products
GUILDLINE INSTRUMENTS 6634A SERIES is a modular series of Resistance Standards that can be rack mountable or simply set on a bench. The 6634A Series provides a set of up to 10 precision resistance standards enclosed in a temperature control...
-327x226.jpg)
Additel takes temperature calibration to the next level with the ADT878 reference dry block calibrators. If you're looking for the best dry-block calibrator on the market, you've found it! Additel's commitment to continuous improvement, qua...
The ADTS542F air data test set is a small, lightweight and cost-effective portable two-channel flightline pitot static tester for ‘Aircraft on the Ramp’ testing. The ADTS542F is also ideal for any aircraft with low pitot static volume deman...
The 33XXA Series multiproduct calibrators are modular versions of the class leading 3000A Series Calibrators. Designed to reduce cost, the 33XXA Series feature 0 - 20V DC output as standard with a wide range of options including 20V - 1000V...
If you are serious about portable temperature calibration tools, then you know a good dry well calibrator is more than just a stable heat source. The Additel 875 Series Dry Well Calibrators combine excellent performance in stability, radial...
A panel mounted oxygen analyser with a remote sensor allows flexibility of installation. The GPR-1900 gas analyzer is suitable for trace oxygen measurements as low as 0-10 ppm; the GPR-2900 measures O2 up to 100%. The remote sensor block al...
The XZR200 Oxygen Analyzer is suitable for measuring in oxygen closed systems, such as ventilation pipes and boiler exhaust flues.
A cost effective zirconium-dioxide analyzer to measure percentage level oxygen in combustion processes, ambi...
-327x226.jpg)
-327x226.jpg)
The 920 and 920HV High Pressure Test Pumps are hand operated pressure pumps designed to generate pressure from 95% vacuum to 3,000psi (200bar). With a long lever, it just takes 40 seconds to reach 3,000 psi (200 bar). A high-quality screw p...
The DCS system is a complete rack-mounted calibration station capable of producing a flow of air (or nitrogen) at a pre-specified range of dew-point temperatures from a minimum of -100°C (-148°F) to a maximum of +20°C (+68°F). Through custo...
The MP100A is a combined humidity and temperature probe designed primarily for meteorological and general outdoor applications. Operation from DC voltage and low power consumption make the MP101A particularly suitable for operation at remot...
Transmille offer a set of current shunts enabling measurement of current from 1mA through to 100A. Each shunt develops 0.7V at nominal full scale, enabling a wide range of multimeters to be used without loss of resolution due to changing ra...
The 8100 Series from Transmille is the most advanced multimeter available on the market. Featuring a full colour screen, the 8100 Series offers a wide range of functionality and covers a wide range of input parameters whilst achieving break...
-327x226.jpeg)
The purpose of Cal NotePad (CNP) is to automatically log and display the temperature of an Isotech calibration bath together with the unit under test. Cal NotePad can be used with baths (or indicators) without PC interfaces by the user typi...
We understand the many challenges associated with thermocouple calibration work. That is precisely why we decided to introduce the ADT875-1210 and ADT878-1210 Thermocouple Calibration Furnaces. With an unmatched stability, uniformity and an...
The XB32A OEM transmitter consists of a cable probe and PCB without housing. Thanks to its compact size, high accuracy and various selection
possibilities, the transmitter can be adapted to customer wishes and used practically everywhere...
P5531 Dirt / Moisture Trap
Dirt / moisture traps provide an effective barrier against the transfer of moisture and dirt from an instrument under test to the sensitive piston/cylinder assembly of a pneumatic deadweight tester. Unexpected pa...
The 2700G Reference Pressure Gauges provide best-in-class measurement performance in a rugged, easy-to-use, economical package. Improved measurement accuracy allows it to be used for a wide variety of applications. It is ideal for calibrati...
The Optidew 401 and Optidew 501 are fast-responding chilled mirror hygrometers utilizing the latest developments in chilled mirror technology. Ideal for use in industrial humidity control and precision laboratory applications. Available in ...
Isotech have a wide range of Dry Blocks to suit probes requiring a large immersion depth. These products feature large and deep calibration volumes. As such they are less portable than the earlier Dry Blocks, but have higher capacities and ...
-327x226.jpeg)
The Additel 928 Hydraulic Pressure Test Pump is a hand operated pressure pump designed to generate pressure to 15,000 psi (1,000 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the ha...
