-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
-1000x1000.jpg "DPS5000 Series Digital Pressure Sensors")
-1000x1000.jpg "DPS5000 Series Digital Pressure Sensors")
Код: DPS5000
Brief specifications
More details
The DPS5000 I2C from Druck, part of the UNIK5000 family, offers integrated digital electronics to enhance the performance level of the UNIK5000 Pressure Sensing Platform to levels unmatched by traditional analog sensors. It features an I2C digital interface, over which fully compensated readings of Pressure and Temperature are sent, as well as control of many functions of the device.
DPS5000 Series Digital Pressure Sensors
- Ranges from 70 mbar to 100 bar
- Total accuracy to ±0.1 % FS
- 3 V supply voltage
- I2C digital output
- Hazardous area certifications
Featured Products
Application works as Control Software for products of Applied Precision. It can show measured values, control meter error measurement and generation of signals (in PTE device)...
A set of test point adaptors to connect the tool less quick fit PV62XG, MC620G and the extension hoses to the device under test...
RPD Gas meter box
Mobile calibration system for flow meters
Hydrogen approved
The gas meter measurement box convinces with its mobility due to the smart hard case in which our measurement unit is installed. In the test setup, this ...
The GPR-1800 series of intrinsically safe trace oxygen analyzers are designed for use in demanding process environments where the low detection limit down the AII’s industrial oxygen sensors can be well utilized. Typical for Analytical Indu...
We understand the many challenges associated with thermocouple calibration work. That is precisely why we decided to introduce the ADT875-1210 and ADT878-1210 Thermocouple Calibration Furnaces. With an unmatched stability, uniformity and an...
The XZR400 zirconium oxide gas purity analyzer from Michell Instruments is designed to measure oxygen as an impurity in inert gases such as nitrogen, carbon dioxide, helium and argon.
A range of trace oxygen analyzers utilizing Michell's M...
Isotech have a wide range of Dry Blocks to suit probes requiring a large immersion depth. These products feature large and deep calibration volumes. As such they are less portable than the earlier Dry Blocks, but have higher capacities and ...
The PV621, 622 and 623 manual pressure generating base stations
Features
• A uniquely capable, re-arrangeable and self-contained pressure test system
• Advanced pressure generation
— 95% vacuum to 20 bar (300 psi) pneumatic
— 95% vacuu...
On-site calibration is becoming an ever more important part of many calibration laboratories workloads. So why perform this calibration any differently from in the laboratory? ProSite software allows the user to take their instrument databa...
-327x226.jpeg)
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes t...
The 3000HR provides a traceable source for high voltage resistance, consisting of a buildup box of 1 GOhm and 10 Gohm resistors, allowing a buildup to 100 Gohm. High value resistance standards are required by many laboratories for calibrati...
-327x226.jpg)
Pressure relief valve When fitted to a PV62X pressure station a relief valve protects the PM620 pressure module and the device under test from overpressure...
GUILDLINE INSTRUMENTS 5030 SERIES are precision air baths providing uniform constant temperature over a range of operating environments. To improve measurements and reduce the uncertainty contribution from temperature effects, these high qu...
VMF® – VenturiMasterFlow®
Flow measurement of air and gases
We develop and manufacture venturi tubes and nozzles as individual components or as complete VMF® systems. The VenturiMasterFlow® measuring system, or VMF® for short, is used...
The HygroSmart I7000XP sensor is designed to accurately and reliably measure relative humidity and temperature in a wide spectrum of industrial and heavy industrial applications. The sensor uses the latest HygroSmart 3 technology, providing...
IDOS to USB converter Allows connection of an IDOS universal pressure module to the DPI620G. P/N IO620-USB-PC is also required to connect the converter to the DPI620G USB port. (not compatible with DPI620G-IS)...
-327x226.jpeg)
The millisKanner channel expander has eight input channels, and each can be configured individually for SPRT, PRT, Thermistor or Thermocouple input. This gives ultimate flexibility with no need for separate devices for resistance or thermoc...
Hydrocarbon dew point (HCDP) and moisture are key quality parameters to ensure the quality of pipeline transmission gas. With the combined Condumax II and OptiPEAK TDL600 analyzer system pipeline operators have the assurance of the most wid...
The DPI104 is a microprocessor-controlled digital pressure gauge that combines precision and functionality in a compact, robust, and simple-to-use package. The DPI 04 matches advanced silicon sensor technology with several convenient design...
A set for connecting measuring equipment with each other using silicone tubes (fittings, silicone tubes and adapters).
X = connection type, eg N - 1/4 NPT male, N2 - 1/2 NPT male, B - 1/4 BSP male, B2 - 1/2 BSP male, M - M20X1.5 male...
