-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: HC2(A)
Brief specifications
More details
The HC2-A extension cables extend the HC2-A probes away from transmitters, handheld instruments or data loggers and data loggers. The HC2-A extension cables can be used up to 5 meters. For longer cable runs, use the AC3003 signal amplifier for distances up to 100 meters.
Amplifier and digital Modbus / USB converter for Rotronic HC2(A) probes
-Type: Active extension cable/MODBUS Converter/USB Converter
USED: To expand the lenght between a HC2(A) probe and a transmitter, handheld or datalogger up to 100m;
Converts the HC2(A) UART to MODBUS signal;
Converts the HC2(A) UART to USB signal;
Range of Application: -40…70 °C
Available Length: 10/20/50/100 m; 5 m; 2.8 m
Featured Products
The P3000 Series is the culmination of over 50 years experience in the production and design of primary pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation these deadwe...
Thermocouple Reference System The TRUrac is a 0°C or elevated temperature thermocouple reference system mounted in a 19” chassis. It has been developed for situations where ambient temperature can be up to 65°C. The reference temperature is...
-327x226.jpg)
Additel takes temperature calibration to the next level with the ADT878 reference dry block calibrators. If you're looking for the best dry-block calibrator on the market, you've found it! Additel's commitment to continuous improvement, qua...
Fluke P5540 Metric Adapter Set:
Includes adapters: M14x1.5, M20x1.5, 1/8" BSP, and 1/4" BSP female.
Designed for use with Fluke P5500 series hydraulic and pneumatic comparison test pumps, excluding P5514B.
Fluke P5541 BSP Adapter Set:
...
-327x226.jpeg)
The Cyclops Model 878 is a spherical blackbody source. It consists of an inner black sphere that sits inside a spherical furnace and is suitable for use as a radiation source for infrared thermometers. The inner sphere has a nominal diamete...
-327x226.jpeg)
Isotech’s Quick Cal range of testers are ideally suited to the less exacting applications where our larger, better specified baths are unnecessary. The Low Temperature Quick Cal covers the temperature range of -12°C to +140°C, making it ide...
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide The Pegasus range offers extreme high temperature calibration in an easy to use portable package – ideal for the calibration of high temperature thermocouples. It has been designed for f...
The XZR400 zirconium oxide gas purity analyzer from Michell Instruments is designed to measure oxygen as an impurity in inert gases such as nitrogen, carbon dioxide, helium and argon.
A range of trace oxygen analyzers utilizing Michell's M...
Simple to use and rugged, the Easidew portable hygrometer is the ideal tool for a wide range of on-site maintenance spot checks and dry dew-point online measurements. The robust integral sample system and wide measurement range ceramic meta...
-327x226.jpg)
Dirt moisture trap Prevents contamination of the PV621 and 622 pneumatic systems and cross contamination from one device under test to another. The IDT connects directly to the PV621 and 622 pressure port and replicates the quick fit connec...
The HygroGen2 is a generator of controlled relative humidity and temperature environments,
primarily for use in calibrating humidity instrumentation, but is also well suited to the
calibration of temperature instrumentation, particularly ...
Isotech have a wide range of Dry Blocks to suit probes requiring a large immersion depth. These products feature large and deep calibration volumes. As such they are less portable than the earlier Dry Blocks, but have higher capacities and ...
The 8100 Series from Transmille is the most advanced multimeter available on the market. Featuring a full colour screen, the 8100 Series offers a wide range of functionality and covers a wide range of input parameters whilst achieving break...
The DCS system is a complete rack-mounted calibration station capable of producing a flow of air (or nitrogen) at a pre-specified range of dew-point temperatures from a minimum of -100°C (-148°F) to a maximum of +20°C (+68°F). Through custo...
GPR-1200 MS-2 (ATEX)
Designed for spot-checking ultra-high purity gases, the
GPR-1200 MS-2 has a range of 0-1 ppm and LDL of 5 ppb
O2 – the lowest oxygen measurements available with a
portable instrument. ATEX-approved version available...
The Reference Standard RS 2x20B is single-phase (RS 2120B) and three-phase (RS 2320B) version of precision meter for electrical power and energy measurement. The Reference Standard is designed to meet all requirements put on a reference sta...
The Isotech Mercury Cell Model is constructed in a rugged, sealed stainless steel enclosure allowing the triple point of -38.8344°C to be realized both easily and safely. Total Confidence The embodiment of the Mercury Triple Point Cell was ...
Modular system transit case (P/N IO620-CASE-4)
A rigid transit case with wheels and an extendable handle. Accommodates two PV62XG pressure stations, DPI620G, MC620G and PM620 modules, with ample storage space for accessories. Size: 736 mm x...
The 2700G Reference Pressure Gauges provide best-in-class measurement performance in a rugged, easy-to-use, economical package. Improved measurement accuracy allows it to be used for a wide variety of applications. It is ideal for calibrati...
The Isothermal range of Thermocouple Standards are the result of many years development. The type R and S standards will cover the range from 0°C to 1600°C. The measuring assembly comprises a 7mm x 300mm or 600mm gas tight 99.7% recrystalli...
