-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
-1000x1000.jpeg "Ice mantle maker for water triple point cells")
Код: Ice mantle
Brief specifications
More details
Are you fed up with cold wet hands, and hours of frustration when you produce an ice mantle in your Triple Point Cell? Change your life and try the Isotech Ice Mantle Maker. It works by using a specially designed anti-gravity heat pipe. The heat pipe exits the cell and exchanges the heat/cool in a small container filled with solid carbon dioxide or preferably liquid nitrogen. Because of the low temperature gradient along the heat pipe the ice mantle is formed close to 0°C, and so beautiful strain free mantles are formed. The Mantle Maker works equally well when you wish to increase the thickness of ice at the bottom of the cell. By keeping only a cc of alcohol in the cell the heat transfer is focused around the bottom of the cell.
Документация
Ice mantle maker for water triple point cells
- Typical time to create a mantle is 20 to 30 minutes
- Are you fed up with cold wet hands, and hours of frustration when you produce an ice mantle in your Triple Point Cell? Change your life and try the Isotech Ice Mantle Maker.
- Specially designed anti-gravity heat pipe
- Create mantle in 20-30 min with Jarrett-Isotech cell
- Option for additional Ice Bridge Prevention Collar
- Form beautiful, strain-free ice mantles
Featured Products
Blanking plug
Allows the PV621G and 622G to be used as pressure generators independently of the DPI620G and PM620 by blanking the PV62XG pressure module port. Not required for the PV623G as the port is self-sealing...
Success in motorsport depends on hundreds of components working together under extreme conditions, and Baker Hughes continues to develop Druck pressure transducers that give the ultimate performance. Druck motorsport sensors have become a w...
The NEW 8158 Advanced Digitising Multimeter from Transmille has been designed as a modern replacement for aging multimeters without compromise. Capable of measurements at a rate of over 100,000 Samples per second, the 8158 8.5 Digit Multime...
Guildline's 6624CT-3000 DC High Current Transformer provides very accurate DC current measurements up to 3000 Amperes. The direct current transformer is designed with an open window to pass a single cable, set of cables, or buss bar that ca...
-327x226.jpeg)
-327x226.jpg)
Need advice on which model? Dry Block Selection Guide The Jupiter Dry Block range offers industry-leading performance in an easy to use portable package – ideal for the calibration of thermocouples and platinum resistance thermometers. It h...
Precision Flexible AC Current Probes SymmProFlex® FCP 3121 and FCP 3321 are current probes based on Rogowski principle designed to measure alternating current up to 3000 A, 6000 A, 12000 A or more. Current Probes SymmProFlex® FCP 3121 (sing...
The XGA301 Industrial gas analyzer from Michell Instruments provides a convenient platform to measure oxygen, dew point, CO2 and CH4. The analyzer can be supplied in one of two bench-mounted chassis and with up to three sensors fitted.
Sta...
With advanced microprocessor technology and state-of-the-art silicon pressure sensors, Additel’s 158Ex series Digital Pressure Modules provide an accurate, reliable, and economic solution for wide range of pressure applications. Our intrins...
Guildline Instruments 7334 Series of AC/DC Air Resistance Standards are designed for high accuracy resistance calibration in air, without the need for stabilization in a temperature controlled bath. PRODUCT FEATURES Typical AC/DC Error ...
The DPS5000 I2C from Druck, part of the UNIK5000 family, offers integrated digital electronics to enhance the performance level of the UNIK5000 Pressure Sensing Platform to levels unmatched by traditional analog sensors. It features an I2C ...
VMF® – VenturiMasterFlow®
Flow measurement of air and gases
We develop and manufacture venturi tubes and nozzles as individual components or as complete VMF® systems. The VenturiMasterFlow® measuring system, or VMF® for short, is used...
The most used temperature for calibration is 0°C. The normal way of creating 0°C is via a mixture of ice and water in a Dewar Flask. However, this can give errors of up to 4°C because water is densest at 4°C and so as the ice melts the temp...
Additel ACal (9530) is a powerful software package designed for varying degrees of automation of calibrations and management of your laboratory. ACal combines pressure and temperature instrument calibration automation features with laborato...
-327x226.jpeg)
The multi-functions of the Europa-6 is a unique award winning concept from Isotech. The Europa-6 is a complete calibration laboratory working over the temperature range 65°C below ambient temperature to +140°C. It permits the calibration of...
Service cable for Rotronic Transmitters.Compatible with HF3/4/5/7/8, HL20D...
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide The Hyperion and Drago have large calibration volumes, 65mm x 160mm deep, which makes them ideal to use as portable liquid baths. Stirred liquid baths are suitable for temperature sensor...
System carrying case Protective carrying case for system components including the DPI620G, MC620G, PM620 modules, test leads, hose and adaptors...
The MP100A is a combined humidity and temperature probe designed primarily for meteorological and general outdoor applications. Operation from DC voltage and low power consumption make the MP101A particularly suitable for operation at remot...
GUILDLINE INSTRUMENTS provides two series of the best performing, most compact, wide-band AC current shunts that are commercially available PRODUCT FEATURES High Current Values to 100 A AC/DC Difference Essentially Zero at Power Frequencies...
-327x226.jpg)
The PV210 is a lightweight, yet rugged and durable, low pressure and vacuum hand pump offering exceptional fine control. Thermally insulated to eliminate hand held temperature effects and supplied with a built-in pressure relief valve to pr...
