-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: 984
Brief specifications
More details
The higher temperature Isotech Blackbody Fixed Point Cells consist of high purity metals within a graphite body. Graphite reacts with air to form Carbon Dioxide. The rate of the reaction is temperature dependant. The effect is small at low temperatures but increases at higher temperatures. For Indium and Tin cells the effect is small and for Indium, Tin and Zinc cells in general no attention needs to be made. Yet for Aluminium, Silver and Copper Cells the oxygen must be excluded or the cells would be quickly damaged. The Model 984 Gas Flow System connects between an inert gas supply, such as Argon or Nitrogen and the Cell in its apparatus. The Model 984 has a regulator and a flow meter optimised to easily set the flow to 0.2 L/min and features an audible alarm should the gas flow be interrupted.
Gas Flow Model 984
- The higher temperature Isotech Blackbody Fixed Point Cells consist of high purity metals within a graphite body.
Featured Products
The Additel 100-FLT-1K is a pneumatic filter and liquid trap covering from -15 to 1,000 psi (-1.0 to 70 bar). This filter is ideal for your pneumatic measurement or calibration applications and contains an easy to use drain valve for removi...
The Reference Standard RS 2x20B is single-phase (RS 2120B) and three-phase (RS 2320B) version of precision meter for electrical power and energy measurement. The Reference Standard is designed to meet all requirements put on a reference sta...
-327x226.jpg)
The PV210 is a lightweight, yet rugged and durable, low pressure and vacuum hand pump offering exceptional fine control. Thermally insulated to eliminate hand held temperature effects and supplied with a built-in pressure relief valve to pr...
7750i Air Data Test Set
The Model 7750i Air Data Test Set represents the latest generation Air Data Test Set (ADTS), incorporating a unique quartz sensor having unequalled precision and long term stability with the latest pressure control ...
Operate confidently in cold environments, even as low as -29°C. The ruggedly designed Model 786 takes laboratory level performance into the harshest of environments.
Unlike other calibrators that cannot be used in the extreme cold, the 7...
If you have a large number of sensors to calibrate then this economically priced stirred liquid bath is the solution. The 820 bath has been introduced to provide a liquid calibration bath with a large volume. This is to allow the bath to be...
-327x226.jpeg)
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes t...
Whenever a high pressure calibration pump is needed, we offer several portable, hydraulic test pump models designed to work seamlessly with a reference gauge and process connection. The QTHP reaches test pressures up to 5000 psi (35 MPa) wh...
The International Recognized Calibration Standard for Salinometers The International Association for Physical Sciences of the Ocean (IAPSO) Standard Seawater manufactured by Ocean Scientific International (OSIL) is available in North Americ...
ReciFlow™ Gas flow meter
Calibration standard for low flows
Our ReciFlow™ is an extremely accurate flow meter for gases. The measurement principle is based on a proven technique of a flow-through piston. The gas flow meter is characte...
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets.
Hazardous area use 1 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...
Guildline Instruments 9910A High Voltage Capacitance Bridge is a measurement standard employing the AC Current Comparator principle. The Current Comparator principle is applied to the measurement of ratio and dissipation factors of high vol...
Guildline Instruments 6625T Temperature Measurement System provides demanding users around the world with the best in temperature measurements and value. Incorporating unique features, this System is a true "Turn-Key" Temperature Measuremen...
The P3000 Series is the culmination of over 50 years experience in the production and design of primary pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation these deadwe...
The SF82 Online has been developed as a fast-response, quick-to-install hygrometer system for the complete dew-point measurement range of -60 up to +60 °C dew point, which covers many moisture measurement applications...
Additel ACal (9530) is a powerful software package designed for varying degrees of automation of calibrations and management of your laboratory. ACal combines pressure and temperature instrument calibration automation features with laborato...
P5531 Dirt / Moisture Trap
Dirt / moisture traps provide an effective barrier against the transfer of moisture and dirt from an instrument under test to the sensitive piston/cylinder assembly of a pneumatic deadweight tester. Unexpected pa...
-327x226.jpeg)
Isotech calibration baths employ sophisticated designs to ensure calibration to the smallest of uncertainties. In 1986 Isotech purchased the interests of H N Irving & Sons Temperature division which had specialised in providing high quality...
Calibration test bench for gas meters
Calibration of domestic gas meters (G1,6…G400)
The test bench is especially designed for the calibration of domestic gas meters (diaphragm gas meters, ultrasonic gas meters, thermoelectric gas met...
The GPR-7500 analyzer utilizes the low-power electro-chemical sensor technology to provide a cost-effective and easy to maintain online-installation hydrogen sulfide measurement in a small package. The GPR-7100 is a portable H2S analyzer ve...
