-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: PRTCalc
Brief specifications
More details
PRTCalc is a free utility for those involved with PT100 platinum resistance thermometers. It allows for the accurate conversion of resistance to temperature or temperature to resistance. PRTCalc conforms with IEC 751 Amendment 2: December 1995. PRTCalc also knows the values for the earlier issue of IEC 751. The user may enter custom coefficients to suit individual probes. Probe specific calculations can then be performed with all entered data available stored alongside a tag name for the platinum resistance thermometer supplied
PRTCalc
- PRTCalc is a free utility for those involved with PT100 platinum resistance thermometers. It allows for the accurate conversion of resistance to temperature or temperature to resistance.
Featured Products
-327x226.jpg)
Druck's UNIK5000 configurator allows you to design your own pressure sensor for your specific application. With more than 200 million configurable combinations, the UNIK5000 configurator guides you through all available options to help you ...
The XTP601 Oxygen Analyzer for safe or hazardous areas is a robust, linear and stable device that is used for measurements in gases such as biogas, methane, hydrogen, nitrogen or carbon dioxide. The analyzer meets the requirements of IEC615...
The MDM25 is a portable, battery-operated hand-held hygrometer. It displays relative humidity, temperature and one calculated value, making this hygrometer suitable for a wide range of applications. The user can choose to display either °C ...
Application works as Control Software for products of Applied Precision. It can show measured values, control meter error measurement and generation of signals (in PTE device)...
Guildline Instruments 5600 SERIES is the latest in high precision fluid/oil baths providing uniform fluid temperature over a range from -5 °C to 55 °C. This Series of Fluid Baths is designed for both metrology and oceanographic applications...
These modular pressure controllers combine speed, cutting-edge control/ measurement technology, modular design, and user-friendly features. The Additel 773 controller is optimized for low pressure work by utilizing Additel’s proven lowpress...
A set of test point adaptors to connect the tool less quick fit PV62XG, MC620G and the extension hoses to the device under test...
Thermocouple Reference System The TRUrac is a 0°C or elevated temperature thermocouple reference system mounted in a 19” chassis. It has been developed for situations where ambient temperature can be up to 65°C. The reference temperature is...
To calibrate gauges with the pressure connection on the rear (for example, panel mount gauges) in their correct operating position, an angle adaptor should be used. The angle adapter uses the standard gauge adapters and positions the gauges...
GUILDLINE INSTRUMENTS 9334A SERIES of Resistance Standards are designed as very stable laboratory standards for high accuracy resistance calibration in air, without the need for a temperature controlled bath. PRODUCT FEATURES 12 Month Stabi...
4610M DC VOLTAGE 0 - ±1025V DC CURRENT 0 - 30A AC VOLTAGE 2mV - 1000V, 10Hz - 1MHz AC CURRENT 20uA - 30A, 10Hz - 30kHz RESISTANCE (PASSIVE) 0 Ohms - 1 GOhm CAPACITANCE (PASSIVE) 1nF - 10uF FREQUENCY 10Hz - 1MHz TEMPERATURE (THERMOCOUPLE) J ...
The Michell range of dew-point generators provides flexibility and control at a competitive price. Based on the volumetric mixing of dry and wet gases, the instruments can be controlled either manually or automatically to suit a wide range ...
The 66252 DMM Switch is a unique option for 6625A Resistance Measurement Systems. This very high isolation switch allows the 6625A System Resistance Standards to be used for both Measurement and Source Applications without having to disconn...
The ADTS554F air data test set is a portable four-channel flightline pitot static tester. In three-channel mode, it provides pitot static air data validation, leak testing, fault-finding and avionics instrumentation testing for any aircraft...
Additel’s 680P Series Digital Pressure Gauges are designed to be used in panel mount applications. With features such as data logging (optional) and Bluetooth technology included, you will find these gauges to be high in value at a reasonab...
-327x226.jpg)
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. Safe area use 2 m/3.28 ft pneumatic hose. Maximum pressure 20 bar/300 psi...
The SF82 is a fast-responding moisture sensor for control of dew point and moisture content in compressed air dryers to maximize energy efficiency. Compressor rooms are often hot with temperatures reaching +50 °C. The SF82 is capable of rel...
-327x226.jpeg)
The TRU (Thermocouple Reference Unit) supplies a stable and accurate 0°C, or elevated reference temperature. It is a self-contained all solid-state unit using Peltier technology which provides maintenance free operation. The TRU features ra...
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories ar...
