Каталог
Назад

Tek Know Ukraine

Solution for metrology

With us expertly :)

Slim Fixed Point Cells

- Metal Clad Fixed-Point Cells From Mercury to Aluminium. Bring your Calibrations Back Under your Own Control

- Ultra Pure >99.9999% 6N

- 35 Year Plus History

- For Optimal Realisations

Brief specifications


More details

Water The Isotech B8 30 130 Cell is small enough to fit into portable Dry Blocks such as the Venus and Europa models. For the larger blocks like the Oceanus Isotech recommend the B12 46 210 with its increased immersion depth. Gallium and Mercury Cells Like the B8 Cell the Slim Gallium Cell can be used in portable blocks like the Venus and Europa, or in stirred liquid baths. The Hydra and Orion have accessories available to support the cells. Indium to Copper Isotech’s Slim Cells have been in constant use since their introduction in 1990. The cells have always been made from the highest quality graphite and 6N (99.9999%) pure metals. After further investment in the lab, and gaining smaller uncertainties from UKAS, we reviewed and further refined our range of metal clad cells to give better accuracy and performance. The new professional ranges of cells have more metal inside providing an active immersion depth in the metal of 160mm. Metal Clad Isotech produced the first metal clad cells in 1990 and have much experience in the manufacture and calibration of high quality proven metal clad cells. Metal clad cells are recommended for all points from Indium to Aluminium. Quartz Clad These cells are recommended for Silver and Copper points, whilst available for the lower temperature points the metal clad versions are recommended as they are more robust, have the same performance and are more cost effective. Equipment for Slim Cells The Slim Cells can be used in the same apparatus as the larger cells, and the greater immersion depth will give the lowest uncertainties.


ВимірюванняГенерація (Імітація)


Документация

Slim Fixed Point Cells

- Metal Clad Fixed-Point Cells From Mercury to Aluminium. Bring your Calibrations Back Under your Own Control

- Ultra Pure >99.9999% 6N

- 35 Year Plus History

- For Optimal Realisations

Featured Products

Three Zone High Temperature Furnace 465
Three Zone High Temperature Furnace 465
Whilst heat pipe furnaces offer the ideal environment to melt and freeze ITS-90 Fixed Points the temperature range is limited by fluid that flows inside the pipe. Three zone furnaces can offer wider operating ranges and still meet the requi...
Код: 465
LMF – System for high precision flow measurement of gas and air
LMF – System for high precision flow measurement of gas and air
LMF® – LaminarMasterFlow® High-precision flow measurement of gas and air The EP LMF® – LaminarMasterFlow® is a complete system for high precision flow measurement of gas and air (volume and mass flow). The LMF® system consists of a fl...
Код: LMF
6625T Temperature Measurement System
6625T Temperature Measurement System
Guildline Instruments 6625T Temperature Measurement System provides demanding users around the world with the best in temperature measurements and value. Incorporating unique features, this System is a true "Turn-Key" Temperature Measuremen...
Код: 6625T
PV411A Combined Test Pump
PV411A Combined Test Pump
The PV411A is a high-quality field proven pressure and vacuum hand pump providing functionality, which has never been seen before in a handheld pressure source. This remarkable product replaces four conventional hand pumps and offers the...
Код: PV411A
QuickCal Blackbody
QuickCal Blackbody
When the high accuracy of the Gemini R is not necessary this product offers a cost effective solution for the calibration and testing of infrared thermometers. The QuickCal Blackbody is ideal for rapid and portable checking of infrared ther...
4.8182/5 11text_less_review
Код: QuickCal Blackbody
Local Evaluation Unit OPS
Local Evaluation Unit OPS
The Local Evaluation Unit OPS is a local microcomputer designed for comparison of reference impulses coming from the standard meter with optical impulses or reflexes from the black mark on the disk of the meter. Value of the measured error ...
Код: Unit OPS
3000HR precision resistance standard precision references and standards
3000HR precision resistance standard precision references and standards
The 3000HR provides a traceable source for high voltage resistance, consisting of a buildup box of 1 GOhm and 10 Gohm resistors, allowing a buildup to 100 Gohm. High value resistance standards are required by many laboratories for calibrati...
5.0000/5 2text_more_review
Код: 3000HR
Cost-Effective Oxygen Analyser for Combustion - OXY-FLEX Series
Cost-Effective Oxygen Analyser for Combustion - OXY-FLEX Series
The XZR200 Oxygen Analyzer is suitable for measuring in oxygen closed systems, such as ventilation pipes and boiler exhaust flues. A cost effective zirconium-dioxide analyzer to measure percentage level oxygen in combustion processes, ambi...
Код: XZR200
4857 Gemini 550
4857 Gemini 550
Need advice on which model? Dry Block Selection Guide The Gemini range of Dry Blocks have high capacity allowing a large number of probes to be calibrated together. They are also suitable to accept large diameter probes with the block volum...
Код: 4858
AII GPR-1600 PPM Oxygen Analyzer
AII GPR-1600 PPM Oxygen Analyzer
Our range of oxygen analyzers are designed to monitor gas produced or used in industrial processes where trace oxygen from low parts per million to pure O2 must be precisely measured. Utilizing AII’s high performance galvanic oxygen sensors...
Код: GPR-1600
6623A Series of High Current Range Extenders
6623A Series of High Current Range Extenders
Guildline’s 6623A Series of High Current Range Extenders / Sources is based on patented technology and provides the best in performance and modularity. The 6623A Series consists of a family of range extenders, with available current outputs...
Код: 6623A
Gemini R Model 976
Gemini R Model 976
The Gemini R 550 Portable Blackbody Calibration Source allows for calibration of noncontact infrared thermometers over the temperature range 30°C to 550°C. It is suitable for use as a primary radiation source for infrared thermometers. Labo...
Код: 976
ADT793 Pressure Controller & Generator
ADT793 Pressure Controller & Generator
The Additel 793 pressure controller combines the latest control/measure technology, modular design and easy to use/maintenance features into a single users friendly device. The Additel 793 provides pressure control up to 15,000 psi (1,000 B...
Код: ADT793
CAL NotePad
CAL NotePad
The purpose of Cal NotePad (CNP) is to automatically log and display the temperature of an Isotech calibration bath together with the unit under test. Cal NotePad can be used with baths (or indicators) without PC interfaces by the user typi...
Код: ePad
IOHOSE-NP2 Pneumatic hose
IOHOSE-NP2 Pneumatic hose
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. Safe area use 2 m/3.28 ft pneumatic hose. Maximum pressure 20 bar/300 psi...
Код: IOHOSE-NP2
9337 SERIES OF PRECISION RESISTANCE STANDARDS
9337 SERIES OF PRECISION RESISTANCE STANDARDS
THE 9336 OR 9337 SERIES OF PRECISION RESISTANCE STANDARDS ARE EXCELLENT SOLUTIONS AS HIGH TO ULTRA HIGH LABORATORY RESISTANCE STANDARDS OR FOR PORTABLE APPLICATIONS REQUIRING HIGH ACCURACY WITH RESISTANCE VALUES FROM 10 MΩ TO 10 PΩ. PRODUCT...
Код: 9337
UNIK5000 Configurable Pressure Sensor
UNIK5000 Configurable Pressure Sensor
Druck's UNIK5000 configurator allows you to design your own pressure sensor for your specific application. With more than 200 million configurable combinations, the UNIK5000 configurator guides you through all available options to help you ...
Код: UNIK5000
DPI104 Digital Pressure Gauge
DPI104 Digital Pressure Gauge
The DPI104 is a microprocessor-controlled digital pressure gauge that combines precision and functionality in a compact, robust, and simple-to-use package. The DPI 04 matches advanced silicon sensor technology with several convenient design...
Код: DPI104
ITS-90 Optimal Fixed Point Cells
ITS-90 Optimal Fixed Point Cells
Isotech Ultra Pure-Metal Freezing Point Cells are designed specifically to realize the liquid-solid equilibrium temperatures of certain high-purity metal elements, for calibration of thermometers at the ITS-90 Fixed Points. When you purchas...
Код: ITS-90
IO620-HOSE-P2-IS Pneumatic hose in hazardous area use
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. Hazardous area use 1 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...
Код: IO620-HOSE-P2-IS
Спасибо!