-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: 3000ZR
Brief specifications
More details
The 3000ZR is an integrated 1.018V and 10V reference standard using multiple independent zeners. Backup power is provided via an internal rechargeable battery for transportation for calibration and use in your laboratory. The 3000ZR is fitted with power, ready and low battery indicators for visual feedback. The 3000ZR is designed using multi-cell solid-state zener reference technology, with integrated temperature control for each individual cell. This provides robust design with the ability to sustain accidental short circuits without damage or affecting accuracy, whilst retaining a lightweight and transportable form factor.
3000ZR precision zener reference precision references & standards
4 Banks of 10V and 1.018V outputs
Stability of better than 2ppm/year
Internal battery backup for transportation
Featured Products
The ES20 Compact Sampling System is designed to reliably and accurately measure dew point or moisture content in a wide variety of industrial gas applications up to 20 barg. This sampling system is an economical and high-quality solution wi...
Operate confidently in cold environments, even as low as -29°C. The ruggedly designed Model 786 takes laboratory level performance into the harshest of environments.
Unlike other calibrators that cannot be used in the extreme cold, the 7...
The piston gauge’s fundamental operating principle and excellent long term stability have made it an indispensable tool in high accuracy pressure metrology. As accuracy levels increase, quality assurance requirements intensify and automatio...
-327x226.jpg)
PM620 now incorporates our unique range of TERPS resonant silicon pressure sensor technology, the PM620T and the PM620TS intrinsically safe version. Providing up to four times greater stability and higher accuracy than current pressure meas...
Transmille offer a set of current shunts enabling measurement of current from 1mA through to 100A. Each shunt develops 0.7V at nominal full scale, enabling a wide range of multimeters to be used without loss of resolution due to changing ra...
This instrument has now been replaced by the superior milliK Precision Thermometer The TTI-7 PLUS is a very high accuracy multi purpose digital thermometer for both platinum resistance thermometers and thermocouples. Laboratory users will w...
IDOS (Intelligent Digital Output Sensor) are smart, Universal Pressure Modules that are interchangeable between any IDOS compatible Druck instruments. They are truly “Plug and Play” modules in that they do not require calibration or set-up ...
These Platinum / Palladium Thermocouples (Pt/Pd) are manufactured by the National Physical Laboratory (NPL) who have developed a novel physical mechanism which mitigates the mechanical stresses caused by the different thermal expansion of P...
-327x226.jpg)
For years, we’ve provided the most durable, accurate, quality pressure calibration products for field applications. The Additel 780 series controller incorporates the same durability, accuracy, and quality into a new bench top controller pa...
The Series 7050 digital pressure indicator expands upon the popular line of Series 7000 products such as the Series 7250 digital pressure controller and Series 7252 dual output pressure controller. The 7050 provides an instrument for applic...
-327x226.jpeg)
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide The Gemini range of Dry Blocks have high capacity allowing a large number of probes to be calibrated together. They are also suitable to accept large diameter probes with the block volum...
SMF® – SonicMasterFlow®
Highly precise flow measurement of gases and air
The SMF® – SonicMasterFlow® series are calibration systems for high-precision flow measurement of air and other gases (optional) (volume and mass flows) using cr...
The ADTS554F air data test set is a portable four-channel flightline pitot static tester. In three-channel mode, it provides pitot static air data validation, leak testing, fault-finding and avionics instrumentation testing for any aircraft...
PPCH™, is a pressure generator/controller/calibrator for liquid pressure operation from 1 to 200 MPa. As with the rest of the Fluke Calibration PPC family of pressure controllers, the emphasis is on high end performance, minimizing measurem...
-327x226.jpeg)
Primary Standard cells fit into the Medusa and Oberon, covering from Indium to Copper Points. These cylindrical cells are 42mm diameter and have a cavity 9mm diameter x 87mm deep. The Medium Temperature “Hockey Puck” cells are 64mm diameter...
The 3000ZR is an integrated 1.018V and 10V reference standard using multiple independent zeners. Backup power is provided via an internal rechargeable battery for transportation for calibration and use in your laboratory. The 3000ZR is fitt...
To calibrate gauges with the pressure connection on the rear (for example, panel mount gauges) in their correct operating position, an angle adaptor should be used. The angle adapter uses the standard gauge adapters and positions the gauges...
Complete Selection of Measurement Accessories for the 7340 and 7350 Series of AC Shunts. AVAILABLE PRODUCTS AND FEATURES Forced Air Convection Unit provides excellent heat dissipation and a more stable output AC Buffer Amplifier for low cur...
-327x226.jpeg)
When the high accuracy of the Gemini R is not necessary this product offers a cost effective solution for the calibration and testing of infrared thermometers. The Greybody Model 975 gives fast accurate results with a larger sensing area. A...
