-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: 9340-4T
Brief specifications
More details
Guildline Instruments 9340-4T Series of precision RTD Simulators and DC Resistance Standards are a complete family of easy to use low to ultra-low, 4 Wire resistance standards offering the best combination of accuracy and resistance range that is commercially available. PRODUCT FEATURES Resistance Ranges include Decades from 1 µΩ to 10 kΩ True RTD Simulation with High Decade Resolution Excellent for milli-Ohm and micro-Ohm Applications and Instruments True 4-Wire Terminal Design Accuracy Better than ± 0.01 % Temperature Coefficient Less than 5 ppm/°C Switch and Wiring Resistance Effects of the Four Terminal Arrangement are Less than 10 µΩ Direct Reading of Resistance Value at the 4 Terminals Long Life Rotary Switches with Solid Silver Contacts An Overlap ‘10’ Position for Fine-Tuning No Other Decade Standard on the Market Today with these Uncertainties and Low Ohmic Range
9340-4T Series of precision RTD Simulators and DC Resistance Standards
- Resistance ranges from 1 µΩ to 10 kΩ
- For devices in the milliohm range
- For devices in microohm ranges
- The error is less than ± 0.01%
- Temperature coefficient less than 5 ppm/°C
Featured Products
The Working Standard WS 2x20 is a single-phase (WS 2120) and three-phase (WS 2320) precision reference meter for electrical power and energy measurement, dedicated to on-site meters testing. The device can be used also as hand-held unit for...
Choice of male 1/4NPT, 1/4BSP, or M20x1.5 fitting type to the following connections, each as male or female:
- 1/8BSP
- 1/4BSP
- 1/2BSP
- 3/8BSP
- M10x1.0
- M14x1.5
- M20x1.5
- 1/8NPT
- 1/4NPT
- 1/2NPT
- 3/8NPT
(Designed for a...
-327x226.jpeg)
The Oberon R uses a Sodium heat Pipe to ensure an exceptionally low temperature gradient along the furnace core. It is ideal for the realization of Aluminium, Silver or Copper ITS-90 Fixed Points. It may be used as a blackbody source over t...
This adapter mounts directly to the test port of the calibrator and allows for the calibration of two instruments at the same time, or the connection of a reference test instrument. Maximum working pressure is 10,000 psi (700 bar)...
Guildline Instruments 9340-4T Series of precision RTD Simulators and DC Resistance Standards are a complete family of easy to use low to ultra-low, 4 Wire resistance standards offering the best combination of accuracy and resistance range t...
Isotech produces a miniature resistor with ultra-low temperature coefficient and ultra-high stability. This is achieved because the resistors are oil filled and hermetically sealed. The function of hermetic sealing is to eliminate the ingre...
Guildline Instruments 7330 Series of Oil Based Resistance Standards are designed for high accuracy resistance calibration in oil (Fluid Baths) or in air. PRODUCT FEATURES Typical AC/DC Error ...
The Series 7050 digital pressure indicator expands upon the popular line of Series 7000 products such as the Series 7250 digital pressure controller and Series 7252 dual output pressure controller. The 7050 provides an instrument for applic...
GUILDLINE INSTRUMENTS 7810 WIDEBAND TRANSCONDUCTANCE AMPLIFIER is the latest innovation for High Current, Wide Bandwidth AC Outputs. PRODUCT FEATURES 50 A and 100 A Models Calibrated Frequency Range (DC to 100 kHz) Uncalibrated 100 kHz to 2...
ProWeb enables creation of an online database of certificates in PDF format that can be accessed through a web portal. Enable simple access to historical certificates for both yourself and your customers, with password protected logins and ...
Additel takes temperature calibration to the next level with the ADT878 reference dry block calibrators. If you're looking for the best dry-block calibrator on the market, you've found it! Additel's commitment to continuous improvement, qua...
Rotronic PC62 & 62V – Reliable digital relative humidity and temperature probe
Highly accurate measurements in precision manufacturing applications...
Are you fed up with cold wet hands, and hours of frustration when you produce an ice mantle in your Triple Point Cell? Change your life and try the Isotech Ice Mantle Maker. It works by using a specially designed anti-gravity heat pipe. The...
-327x226.jpg)
Prevents contamination of the PV621, 622 and 624 pneumatic systems and cross contamination from one device under test to another. The IDT connects directly to the PV621, 622 and 624 pressure port and replicates the quick fit connection for ...
GUILDLINE INSTRUMENTS provides two series of the best performing, most compact, wide-band AC current shunts that are commercially available PRODUCT FEATURES High Current Values to 100 A AC/DC Difference Essentially Zero at Power Frequencies...
The piston gauge’s fundamental operating principle and excellent long term stability have made it an indispensable tool in high accuracy pressure metrology. As accuracy levels increase, quality assurance requirements intensify and automatio...
The Easidew PRO I.S. intrinsically safe dew-point transmitter measures moisture in demanding process and refinery applications in either gases or non-polar liquids.
It offers a wide measurement range of –110 to +20°Cdp, is easily integra...
WinPrompt Calibration Software
WinPrompt calibration software increases calibration efficiency by providing full-color, Windows-based measurement for your process. This easyto-use software can be used independently or in conjunction with t...
-327x226.jpeg)
-327x226.jpeg)
Multi Function: Six Modes including Dry Block and Liquid Bath Fast Response 35mm x 160mm Calibration Volume Calibrate Whole Measurement Loop Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probe...
The 33XXA Series multiproduct calibrators are modular versions of the class leading 3000A Series Calibrators. Designed to reduce cost, the 33XXA Series feature 0 - 20V DC output as standard with a wide range of options including 20V - 1000V...
