-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: IO620-HOSE-H2
Brief specifications
More details
A high pressure hydraulic hose rated to 1,000 bar (15,000 psi) and terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. The hose is self sealing to avoid leakage when disconnected
Safe area use 1 m/3.28 ft hydraulic hose
IO620-HOSE-H2 High pressure hydraulic hose
See DPI 620 G Data Sheet
Featured Products
The HC2-A extension cables extend the HC2-A probes away from transmitters, handheld instruments or data loggers and data loggers. The HC2-A extension cables can be used up to 5 meters. For longer cable runs, use the AC3003 signal amplifier ...
Precision Flexible AC Current Transformer SymmProFlex® FCT 2161 is based on Rogowski principle designed to measure alternating current and to transform the measured current to standardized 5 A level...
Designed with low cost, portability and ease of use in mind, the 2080 provides on or off site verification of RCD testers, Loop testers, Continuity and Insulation testers and multifunction testers. The 2080 is simple to use and provides the...
Isotech produces a miniature resistor with ultra-low temperature coefficient and ultra-high stability. This is achieved because the resistors are oil filled and hermetically sealed. The function of hermetic sealing is to eliminate the ingre...
The Meter Handling System is composed of a set of movable trolleys and fixed stands network. The system is utilized for convey and connection of tested meters for technological operations. The system is capable to handle single-phase two-wi...
The XGA301 Industrial gas analyzer from Michell Instruments provides a convenient platform to measure oxygen, dew point, CO2 and CH4. The analyzer can be supplied in one of two bench-mounted chassis and with up to three sensors fitted.
Sta...
GB-75 and GB-152 are gas boosters with control kits intended to be used to provide a very high pressure gas supply to systems using a Fluke Calibration GPC1 High Pressure Gas Controller and other high gas pressure test and calibration syste...
Other Features The CMR-I 2x30 is equipped with Load Monitoring, Protection Circuits and Load Bypass via serial remote control. The CMR-I can be implemented into any existing test system with negligible additional power losses. Current ratio...
The NEW 8158 Advanced Digitising Multimeter from Transmille has been designed as a modern replacement for aging multimeters without compromise. Capable of measurements at a rate of over 100,000 Samples per second, the 8158 8.5 Digit Multime...
-327x226.jpg)
Whilst heat pipe furnaces offer the ideal environment to melt and freeze ITS-90 Fixed Points the temperature range is limited by fluid that flows inside the pipe. Three zone furnaces can offer wider operating ranges and still meet the requi...
As industry increasingly moves to high precision instrumentation there is an increasing need to utilise very high performance test and service equipment. Model 006-A is a laboratory accuracy six decade resistance box with a total resistance...
The industry leading 3200B series provides by far the fastest and safest solution for calibration of Loop, RCD, PAT's and insulation testers. By using the 3200B series, calibration time can be drastically reduced, while superior accuracy me...
The Local Evaluation Unit OPS is a local microcomputer designed for comparison of reference impulses coming from the standard meter with optical impulses or reflexes from the black mark on the disk of the meter. Value of the measured error ...
Modular system transit case (P/N IO620-CASE-4)
A rigid transit case with wheels and an extendable handle. Accommodates two PV62XG pressure stations, DPI620G, MC620G and PM620 modules, with ample storage space for accessories. Size: 736 mm x...
The 8410A Portasal™ is a portable, high precision instrument from the world leader in Salinometers. This instrument will deliver salinity calculations on-board ship with laboratory level accuracy. PRODUCT FEATURES Completely Portable Yet Of...
P5514B Hydraulic Pressure Comparator
The P5514B Hydraulic Pressure Comparator is a simple, robust and economical pressure test pump for calibrating gauges, switches and transducers with accurate, fine adjust capabilities. It generates pres...
Flow generator
Simulating breathing air flows for the calibration of flow sensors (air)
The test bench is used to calibrate air flow sensors for lung function diagnostics and is designed for simulating the human breathing air. By usin...
RPM4 is much more than a traditional pressure indicator
State of the art performance from very low pressure to 280 MPa (40 000 psi)… advanced on-board features…compact and rugged…full local and remote communications…RPM4 is the perfect sol...
-327x226.jpeg)
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes t...
