-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: HG2
Brief specifications
More details
The HygroGen2 is a generator of controlled relative humidity and temperature environments,
primarily for use in calibrating humidity instrumentation, but is also well suited to the
calibration of temperature instrumentation, particularly those used for the measurement of
temperature in air.
It is a completely self-contained, portable unit requiring no external resources except mains
power. This allows technicians to perform calibrations in the laboratory, workshop or on-site.
RH and Temperature Probe Calibrator - Rotronic HygroGen 2
-Control probe specification ±0.8 %RH (10…30 °C), ±2 %RH (0…60 °C) ±0.1K (10…30 °C), ±0.3K (0…60 °C)
Working volume: 1.5 litres 17 litres
Typical calibration uncertainty: ±1.5 %RH (k=2) at 23 °C, ±0.15 °C (k=2) 15...50 °C
Sensor: HygroClip2, capacitive RH sensor, Pt100 temperature sensor
Generation method Mixed flow with desiccant drier cell and piezoelectric humidifier; Peltier thermoelectric element with radial chamber mixing fan
Featured Products
-327x226.jpeg)
-327x226.jpg)
Need advice on which model? Dry Block Selection Guide The Jupiter Dry Block range offers industry-leading performance in an easy to use portable package – ideal for the calibration of thermocouples and platinum resistance thermometers. It h...
The Model 787 calibrator redefines industry standards by blending industry leading performance and speed of operation within a robust design tailored for extreme conditions. The maximum operating temperature is 660°C allowing wide range of ...
-327x226.jpg)
The PV210 is a lightweight, yet rugged and durable, low pressure and vacuum hand pump offering exceptional fine control. Thermally insulated to eliminate hand held temperature effects and supplied with a built-in pressure relief valve to pr...
The 9000A series range of multiproduct calibrators offers the widest workload of any calibration system presently available. The 9000A series provides all of the functionality of the 3000A series multiproduct calibrator in a dedicated rugge...
LMF® – LaminarMasterFlow®
High-precision flow measurement of gas and air
The EP LMF® – LaminarMasterFlow® is a complete system for high precision flow measurement of gas and air (volume and mass flow). The LMF® system consists of a fl...
-327x226.jpeg)
The TRU (Thermocouple Reference Unit) supplies a stable and accurate 0°C, or elevated reference temperature. It is a self-contained all solid-state unit using Peltier technology which provides maintenance free operation. The TRU features ra...
Designed to pre-warm and anneal Standard Platinum Resistance Thermometers Maintenance Free Use Automatic Temperature Cycling The Annealing Furnace, model 414, is designed to heat, anneal and cool Standard Platinum Resistance Thermometers (S...
Laminar Flow Elements
Flow measurement elements with highest accuracy
EP Ehrler Prüftechnik manufactures LFEs in the flow range from 0.012 to 4000 m³/h. In addition to the standard range, EP offers customer-specific LFEs that are perf...
The 12X series pressure manifolds are designed for expanding pressure test ports during pressure calibration.
The Additel 121 pressure manifold is used for pneumatic pressure calibration up to 3,000 psi (200bar), while the Additel 123 mani...
The ES20 Compact Sampling System is designed to reliably and accurately measure dew point or moisture content in a wide variety of industrial gas applications up to 20 barg. This sampling system is an economical and high-quality solution wi...
Guildline Instruments 9340-4T Series of precision RTD Simulators and DC Resistance Standards are a complete family of easy to use low to ultra-low, 4 Wire resistance standards offering the best combination of accuracy and resistance range t...
-327x226.jpeg)
Our TTI range use high quality ‘Lemo’ connectors for the Pt100 inputs. This simple accessory provides 4mm Terminal Posts for the connection of bare wires, spade terminals or 4mm plugs – useful if a lot of probes are going to be used with th...
MPG2-H is a compact, easy-to-use and economical system for manually generating and adjusting pressure from atmosphere to as high as 200 MPa (30 000 psi) in systems where precise pressure adjustment is required.
MPG2-H is very well suited f...
The new Additel 960 Hydraulic Pressure Test Pump is a benchtop pressure pump designed to generate pressure to 60,000 psi (4,200 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the hand...
P5531 Dirt / Moisture Trap
Dirt / moisture traps provide an effective barrier against the transfer of moisture and dirt from an instrument under test to the sensitive piston/cylinder assembly of a pneumatic deadweight tester. Unexpected pa...
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets.
Safe area use 1 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...
Application works as Control Software for products of Applied Precision. It can show measured values, control meter error measurement and generation of signals (in PTE device)...
GUILDLINE INSTRUMENTS 9334A SERIES of Resistance Standards are designed as very stable laboratory standards for high accuracy resistance calibration in air, without the need for a temperature controlled bath. PRODUCT FEATURES 12 Month Stabi...
These modular pressure controllers combine speed, cutting-edge control/ measurement technology, modular design, and user-friendly features. The Additel 773 controller is optimized for low pressure work by utilizing Additel’s proven lowpress...
-327x226.jpeg)
Primary Standard cells fit into the Medusa and Oberon, covering from Indium to Copper Points. These cylindrical cells are 42mm diameter and have a cavity 9mm diameter x 87mm deep. The Medium Temperature “Hockey Puck” cells are 64mm diameter...
