AII GPR-1500 PPM Oxygen Analyzer/ Transmitter

-Accuracy: < 2% of FS range under constant conditions

Analysis: 0-10, 0-100, 0-1000 PPM, 0-1%, 0-25% (CAL) FS Auto-ranging or manual lock on a single range

Application: Oxygen analysis in inert, hydrocarbon, helium, hydrogen, mixed and acid (CO2) or atmospheres in glove boxes

Area Classification: General purpose or Certified for use in hazardous areas

Enclosure: Painted aluminum or NEMA Type 3R for rain in outdoor applications (UL) NEMA 4X (ATEX)

Flow: Not flow sensitive; 1-2 SCFH flow rate recommended

Pressure: Atmospheric; Flowing system: inlet - regulate to 5-30 psig, vent - atmospheric or return controlled atmosphere

Power: 18-24 VDC two wire loop; 12-28 VDC (cUL and ATEX Certified) 110-220 VAC (ATEX Certified)

Sample System: Glove box Sample Calibration Module (pictured right) or Sample flow meter; options available, see other side; Unique liquid drain sensor manifold, flow indicator

Sensor Model: GPR-12-333-M for non-acid (CO2) gas streams XLT-12-333-M for gases containing > 0.5% CO2

Operating Range: 5ºC to 45ºC (GPR sensor), -10ºC to 45ºC (XLT sensor); -10ºC to 45ºC (GPR sensor); -18ºC to 45ºC (XLT)

Код: GPR-1500

Brief specifications

More details

Купить в кредит

Add to Wish List

Compare this Product

A wall mounted oxygen analyzer in a NEMA enclosure, suitable for indoor or outdoor. This single channel oxygen monitor is supplied with a stainless steel O2 sensor housing for trace oxygen gas analysis in safe as well as hazardous areas where ATEX approval is needed. The low detection limit of 0.05ppm allows a minimum oxygen measurement range of 0 to 10 ppm O2. Ideal for clean gas applications and when used with the XLT oxygen sensor type it allows measurement in pure carbon dioxide. The Analytical Industries long-life oxygen sensors are maintenance-free sealed electrochemical cells that don’t need top up of electrolyte and can be exchanged in few minutes.

ВимірюванняГенерація (Імітація)

Открыть спецификацию

Закрыть спецификацию

Документация

AII GPR-1500 PPM Oxygen Analyzer/ Transmitter

Name: AII GPR-1500 PPM Oxygen Analyzer/ Transmitter
Brand: Analytical Industries Inc
SKU: GPR-1500
Availability: OutOfStock

-Accuracy: < 2% of FS range under constant conditions

Analysis: 0-10, 0-100, 0-1000 PPM, 0-1%, 0-25% (CAL) FS Auto-ranging or manual lock on a single range

Application: Oxygen analysis in inert, hydrocarbon, helium, hydrogen, mixed and acid (CO2) or atmospheres in glove boxes

Area Classification: General purpose or Certified for use in hazardous areas

Enclosure: Painted aluminum or NEMA Type 3R for rain in outdoor applications (UL) NEMA 4X (ATEX)

Flow: Not flow sensitive; 1-2 SCFH flow rate recommended

Pressure: Atmospheric; Flowing system: inlet - regulate to 5-30 psig, vent - atmospheric or return controlled atmosphere

Power: 18-24 VDC two wire loop; 12-28 VDC (cUL and ATEX Certified) 110-220 VAC (ATEX Certified)

Sample System: Glove box Sample Calibration Module (pictured right) or Sample flow meter; options available, see other side; Unique liquid drain sensor manifold, flow indicator

Sensor Model: GPR-12-333-M for non-acid (CO2) gas streams XLT-12-333-M for gases containing > 0.5% CO2

Operating Range: 5ºC to 45ºC (GPR sensor), -10ºC to 45ºC (XLT sensor); -10ºC to 45ºC (GPR sensor); -18ºC to 45ºC (XLT)

Foto

Options / Accessories

Description

Featured Products

Laminar Flow Elements

Laminar Flow Elements Flow measurement elements with highest accuracy EP Ehrler Prüftechnik manufactures LFEs in the flow range from 0.012 to 4000 m³/h. In addition to the standard range, EP offers customer-specific LFEs that are perf...

Код: LFE

Dew-Point Transmitter - Michell Easidew EA2

The Easidew sensor is a moisture meter that measures both dew point and moisture content. It is simple to install as it is available with a wide range of process connections and electrical connectors. All Easidew dew-point transmitters are ...

Код: EA2

Process Moisture Analyzer - Michell Promet I.S

Promet I.S. Process Moisture Analyzers are heavy duty, industrial hygrometer systems for measurement of high pressure, process gases and vaporized liquids on natural gas platforms and terminals, petrochemical plants and industrial gas manuf...

Код: Promet I.S

Pegasus R Model 970

The Pegasus R is a compact furnace for calibrating radiation pyrometers. The temperature of the furnace is set on a controller, whilst an independent indicator, whose sensor fits into the cavity, indicates the actual radiance temperature. T...

Код: 970

Medusa 510

Isotech have a wide range of Dry Blocks to suit probes requiring a large immersion depth. These products feature large and deep calibration volumes. As such they are less portable than the earlier Dry Blocks, but have higher capacities and ...

Код: 510

MPG2-H Manual Hydraulic Pressure Regulator

MPG2-H is a compact, easy-to-use and economical system for manually generating and adjusting pressure from atmosphere to as high as 200 MPa (30 000 psi) in systems where precise pressure adjustment is required. MPG2-H is very well suited f...

Код: MPG2-H

Chilled Mirror Hygrometer - Michell S8000 Remote

The S8000 Remote is a compact chilled mirror hygrometer with a remote sensor. It provides it provides fundamentally derived, high precision relative humidity readings necessary for validating the results of environmental tests. It offers a...

Код: S8000 Remote

Humidity Temperature Probes - Rotronic HC2A-IC/IM/IE

The HC2A series are digital humidity-temperature probes based on the AirChip3000 technology. These probes feature a UART serial interface and two 0…1 V linear analog output signals. The HC2A probes are designed for use with the HygroClip2...

Код: HC2A-IC/IM/IE

ADT946A Hydraulic Pressure Test Pump

The new Additel 946A Hydraulic Pressure Test Pump is a benchtop pressure pump designed to generate pressure to 15,000 psi (1,000 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the han...

Код: ADT946A

Blackbody Source Model 988

First introduced to assist in relation to the SARS outbreak during the early 2000s the Model 988 is now helping in relation to coronavirus. It can be used to increase the accuracy of thermal imagers being used to measure human skin temperat...

Код: 988

Working Standard WS 2330 Series

The Working Standard WS 2330 is a three-phase precision reference meter for electrical power and energy measurement, dedicated to on-site meter testing. The device provides also function of local data exchange with smart meters (data readou...

Код: 3121

Dryers for Humidity Calibration Systems - PSD2 and PSD4

Pressure Swing dryers provide a source of very dry compressed air for use as a zero gas in humidity calibration systems, or for general laboratory applications. The Michell PSD Series Pressure Swing Dryers use two columns filled with 4Å mo...

Код: PSD2,4

ADT783 Pressure Controller

These modular pressure controllers combine cutting-edge control/measurement technology, modular design, and user-friendly features. The Additel 783 controller series is optimized for high speed to pressure without compromising accuracy and ...

Код: ADT783

Additel 681A Digital Pressure Gauge

Additel’s 681A Series Digital Pressure Gauges are designed to be your favorite tool for a wide range of pressure measurement and calibration applications. With features such as datalogging and Bluetooth technology included, you will find th...

Код: ADT681A

Process Moisture Analyzer - Michell QMA601

The QMA601 Process Moisture Analyzer provides highly reliable, fast and accurate measurement of moisture content in a wide variety of carrier gases. It has a lower detection limit of 0.1 ppmV with reliable accuracy at sub-ppm trace moisture...

Код: QMA6010

66252 DCC Resistance Bridges

The 66252 DMM Switch is a unique option for 6625A Resistance Measurement Systems. This very high isolation switch allows the 6625A System Resistance Standards to be used for both Measurement and Source Applications without having to disconn...

Код: 66252

7220 Asynchronous Power Analyzer

Guildline Instruments 7220 Asynchronous Power Analyzer is the latest in a 3 phase AC Power Measurement Laboratory Standard designed for the most demanding power measurement applications today. Innovative, patented sensing technology provide...

Код: 7220

TRU Model 937

The TRU 937 (Temperature Reference Unit) supplies a stable and accurate 0°C or elevated Reference Temperatures between 45°C and 70°C. It is a self-contained all solid state unit using peltier technology which provides maintenance free opera...

3.3333/5 3text_more_review

Код: 937

Water Triple Point Maintenance Bath

This dedicated apparatus has more than 35 years of proven use and is widely used by the worlds’ leading NMIs. In a recent International study cells from 21 of the world’s leading laboratories were inter-compared; the study used two Isotech ...

Код: Water Triple

DPI612 Pressure Calibrator

The Druck DPI612 Series Pressure Calibrator is an innovative and versatile precision pressure measurement and generation tool designed for professional use. The Druck DPI612 series has three models to create pressures from 95% vacuum to ...

Код: DPI612

AII GPR-1500 PPM Oxygen Analyzer/ Transmitter

Документация

AII GPR-1500 PPM Oxygen Analyzer/ Transmitter

Newsletter Subscribe