AII GPR-2500 Percent Oxygen Analyzer

-Accuracy: < 2% of FS range under constant conditions

Analysis: 0-1%, 0-5%, 0-10%, 0-25% FS ranges; auto-ranging or fixed single range

Application: Oxygen analysis in inert, hydrocarbon, helium, hydrogen, mixed and acid (CO2) gas streams

Area Classification: General purpose or Certified for use in hazardous areas

Connections: 1/8" compression tube fittings

Enclosure: Fiberglass NEMA 4X; NEMA Type 3R for rain in outdoor applications (UL) NEMA 4X (ATEX) or Painted aluminum

Flow Sensitivity: Not flow sensitive, 1-2 SCFH recommended

Pressure: Inlet - regulate to 5-30 psig to deliver 1-2 SCFH flow; vent - atmospheric

Power: 18-24 VDC (2 Wire Loop)

Sample System: None or Sample flow meter; options available, see other side

Sensor Model: GPR-11-32-4 for non-acid (CO2) gas streams XLT-11-24-4 for gases containing > 0.5% CO2

Operating Range: 5ºC to 45ºC (GPR sensor), -10º to 45ºC (XLT sensor)

Код: GPR-2500

Brief specifications

More details

Купить в кредит

Add to Wish List

Compare this Product

The GPR-2500 is a wall-mounted Industrial Acid Analyzer for acid measurement in both general-purpose and explosion-proof rooms.

Wide choice of housing construction plastic, metal, aluminum and different finishes for standard and non-dangerous areas with intrinsically safe and flameproof enclosure. Variances for installing sampling systems with rare phase or without additional sampling system.

ВимірюванняГенерація (Імітація)

Открыть спецификацию

Закрыть спецификацию

Документация

AII GPR-2500 Percent Oxygen Analyzer

-Accuracy: < 2% of FS range under constant conditions

Analysis: 0-1%, 0-5%, 0-10%, 0-25% FS ranges; auto-ranging or fixed single range

Application: Oxygen analysis in inert, hydrocarbon, helium, hydrogen, mixed and acid (CO2) gas streams

Area Classification: General purpose or Certified for use in hazardous areas

Connections: 1/8" compression tube fittings

Enclosure: Fiberglass NEMA 4X; NEMA Type 3R for rain in outdoor applications (UL) NEMA 4X (ATEX) or Painted aluminum

Flow Sensitivity: Not flow sensitive, 1-2 SCFH recommended

Pressure: Inlet - regulate to 5-30 psig to deliver 1-2 SCFH flow; vent - atmospheric

Power: 18-24 VDC (2 Wire Loop)

Sample System: None or Sample flow meter; options available, see other side

Sensor Model: GPR-11-32-4 for non-acid (CO2) gas streams XLT-11-24-4 for gases containing > 0.5% CO2

Operating Range: 5ºC to 45ºC (GPR sensor), -10º to 45ºC (XLT sensor)

Foto

Options / Accessories

Description

Featured Products

TRU Model 938

The TRU (Thermocouple Reference Unit) supplies a stable and accurate 0°C, or elevated reference temperature. It is a self-contained all solid-state unit using Peltier technology which provides maintenance free operation. The TRU features ra...

Код: 938

ISOTowers

The most accurately defined temperatures are those defining points (fixed points) of ITS-90. The leading Primary Laboratories use large fixed point cells in deep calibration furnaces that utilise heat pipes to eliminate temperature gradient...

Код: ISOTowers

Pegasus 4853

Need advice on which model? Dry Block Selection Guide The Pegasus range offers extreme high temperature calibration in an easy to use portable package – ideal for the calibration of high temperature thermocouples. It has been designed for f...

Код: 4853

Isorac Model 844

The function of this reference unit differs from other rack mounted systems in that the temperature of the metal block in which the thermocouple and copper leads are inserted actually varies with ambient temperature. A separate output signa...

Код: 845

Precision Electronically Compensated Current Transformer CMR-I ™

Other Features The CMR-I 2x30 is equipped with Load Monitoring, Protection Circuits and Load Bypass via serial remote control. The CMR-I can be implemented into any existing test system with negligible additional power losses. Current ratio...

Код: CMR-I

Moisture in Natural Gas Analyzer - Michell OptiPEAK TDL600

The next generation TDLAS Analyzer for automatic online measurement of moisture in variable compositions of natural gas and biomethane. The OptiPEAK TDL600 Tuneable Diode Laser Analyzer employs the latest techniques in laser absorption spec...

Код: TDL600

3000RS precision resistance standard precision references and standards

The 3000RS is a modern precision resistance standard offering annual stabilities of better than 5ppm without the requirement for an oil bath, with temperature co-efficients as low as 0.1ppm/°C Using ultra-high precision, 4 wire hermetically...

Код: 3000RS

IO620-HOSE-P1 Pneumatic hose

Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. Safe area use 1 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...

Код: IO620-HOSE-P1

AII GPR-18

The GPR-1800 series of intrinsically safe trace oxygen analyzers are designed for use in demanding process environments where the low detection limit down the AII’s industrial oxygen sensors can be well utilized. Typical for Analytical Indu...

Код: GPR-18

HygroSmart HS3 Relative Humidity and Temperature Probe

The HygroSmart HS3 an advanced, digital probe with measured or calculated outputs and a rugged 10 bar pressure rated housing, designed to provide reliable humidity measurement for process control in a wide range of applications. The HS3 pro...

Код: HS3

IO620-HOSE-P1-IS Pneumatic hose in hazardous area use

Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. Hazardous area use 1 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...

Код: IO620-HOSE-P1-IS

3000ZR precision zener reference precision references & standards

The 3000ZR is an integrated 1.018V and 10V reference standard using multiple independent zeners. Backup power is provided via an internal rechargeable battery for transportation for calibration and use in your laboratory. The 3000ZR is fitt...

Код: 3000ZR

Cost-Effective Oxygen Analyser for Combustion - OXY-FLEX Series

The XZR200 Oxygen Analyzer is suitable for measuring in oxygen closed systems, such as ventilation pipes and boiler exhaust flues. A cost effective zirconium-dioxide analyzer to measure percentage level oxygen in combustion processes, ambi...

Код: XZR200

2465A Gas Piston Gauge

The Model 2465 Gas Piston Gauge has a long history of serving national standards laboratories, commercial industry and government organizations as a primary pressure standard for over 40 years. Since its original introduction, enhancements ...

Код: 2465A

E-DWT 6531/6532 Electronic Deadweight Tester

The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and...

Код: E-DWT

3350A precision multiproduct calibrator

The 33XXA Series multiproduct calibrators are modular versions of the class leading 3000A Series Calibrators. Designed to reduce cost, the 33XXA Series feature 0 - 20V DC output as standard with a wide range of options including 20V - 1000V...

3.7500/5 8text_lot_review

Код: 3350A

Additel 878 Reference Dry Well Calibrator

Additel takes temperature calibration to the next level with the ADT878 reference dry block calibrators. If you're looking for the best dry-block calibrator on the market, you've found it! Additel's commitment to continuous improvement, qua...

Код: ADT878-700

ADT793 Pressure Controller & Generator

The Additel 793 pressure controller combines the latest control/measure technology, modular design and easy to use/maintenance features into a single users friendly device. The Additel 793 provides pressure control up to 15,000 psi (1,000 B...

Код: ADT793

IO620-HOSE-P2 Pneumatic hose

Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. Safe area use 2 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...

Код: IO620-HOSE-P2

Critical / Sonic nozzles

Critical / Sonic nozzles Flow measurement elements with highest accuracy EP Ehrler Prüftechnik manufactures sonic nozzles in the flow range from 0.005 up to 2000 m³/h. In addition to the standard range, EP Ehrler Prüftechnik offers cu...

Код: SN

AII GPR-2500 Percent Oxygen Analyzer

Документация

AII GPR-2500 Percent Oxygen Analyzer

Newsletter Subscribe