-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: FG
Brief specifications
Flow range: 0.0025…20 l/s
Acceleration: 0…1400 l/s
Position of the piston: 0…330 mm
Pressure measurement cylinder: -100…100 mbar (±0.1% FS)
More details
Flow generator
Simulating breathing air flows for the calibration of flow sensors (air)
The test bench is used to calibrate air flow sensors for lung function diagnostics and is designed for simulating the human breathing air. By using a piston system, constant flows and flow profiles such as sine, trapezoid or freely selectable curves can be generated via data point input (flow generator).
Flow measurement in medical industry
The test system is particularly characterized by the generation of stable flows in the low flow volume range. In the medical industry it is used to adjust or calibrate flow sensors, for example to measure human respiration. The human breathing velocity is very fast – the use of the piston system makes it possible to generate high flow rates and to regulate and, if necessary, adjust them at the same time.
Features
High dynamic
Freely selectable volume flow curves
Traceable calibration of the volume flow
Flow generator
- Flow range: 0.0025…20 l/s
- Acceleration: 0…1400 l/s
- Position of the piston: 0…330 mm
- Pressure measurement cylinder: -100…100 mbar
Featured Products
-327x226.jpg)
Druck's UNIK5000 configurator allows you to design your own pressure sensor for your specific application. With more than 200 million configurable combinations, the UNIK5000 configurator guides you through all available options to help you ...
Request Information Service The PCR from Michell is a transportable gas blender in a flight case, suitable for calibrating a multitude of gas analyzers at virtually any location and has been designed to allow the blending of two or three...
A high pressure hydraulic hose rated to 1,000 bar (15,000 psi) and terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. The hose is self sealing to avoid leakage...
PM200 Pressure Measurement Modules
Key features:
- 0.02% FS specification makes it ideal for calibrating or testing pressure dial gauges, lower accuracy transmitters, or pressure switches.
- Rugged silicon pressure sensor design allo...
The 66252 DMM Switch is a unique option for 6625A Resistance Measurement Systems. This very high isolation switch allows the 6625A System Resistance Standards to be used for both Measurement and Source Applications without having to disconn...
The S4000 TRS measures very dry dew points down to -100 °C (-148 °F) with ±0.1 °C accuracy. It features excellent stability and reproducibility across its entire measurement range and is used in calibration and standards laboratories worldw...
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets.
Safe area use 1 m/3.28 ft pneumatic hose. Maximum pressure 20 bar/300 psi...
The ADTS554F air data test set is a portable four-channel flightline pitot static tester. In three-channel mode, it provides pitot static air data validation, leak testing, fault-finding and avionics instrumentation testing for any aircraft...
By temperature controlling an otherwise very stable resistor a performance close to the very best available World-wide can be achieved at a surprisingly low price. The resistor itself is oil filled and hermetically sealed. The function of h...
The ROTRONIC probe type HC2-AW-(USB) measures the humidity and the temperature of hygroscopic products. The digital probe signal is processed by an indicator such as the HygroLab C1 or the HP23- AW-A, or from a pc (HC2-AW-USB)...
The Michell range of dew-point generators provides flexibility and control at a competitive price. Based on the volumetric mixing of dry and wet gases, the instruments can be controlled either manually or automatically to suit a wide range ...
Heat Pipe Furnaces Isotech metrology furnaces have more than 35 years of proven use and are widely used by the worlds’ leading NMIs. For the optimal use of fixed point cells the temperature uniformity should be less than 10mK over the lengt...
The Easidew PRO XP moisture transmitter is an explosion-proof dew-point transmitter for trace moisture measurements in gases or liquids in hazardous areas. It is certified by ATEX, CQPSUS, IECEx, and GOST for use in any North American, Euro...
The Optidew 401 and Optidew 501 are fast-responding chilled mirror hygrometers utilizing the latest developments in chilled mirror technology. Ideal for use in industrial humidity control and precision laboratory applications. Available in ...
The GPR-1800 series of intrinsically safe trace oxygen analyzers are designed for use in demanding process environments where the low detection limit down the AII’s industrial oxygen sensors can be well utilized. Typical for Analytical Indu...
Our range of oxygen analyzers are designed to monitor gas produced or used in industrial processes where trace oxygen from low parts per million to pure O2 must be precisely measured. Utilizing AII’s high performance galvanic oxygen sensors...
Our range of oxygen analyzers are designed to monitor gas produced or used in industrial processes where trace oxygen from low parts per million to pure O2 must be precisely measured. Utilizing AII’s high performance galvanic oxygen sensors...
Includes a range of accessories from power cables to extended hoses and more...
The 7050LP low pressure digital pressure indicator, part of the versatile Series 7250 family, is specifically designed to meet the demanding performance requirements of calibrating low pressure sensors, transducers, mechanical gauges, porta...
The GPR-1800 series of intrinsically safe trace oxygen analyzers are designed for use in demanding process environments where the low detection limit down the AII’s industrial oxygen sensors can be well utilized. Typical for Analytical Indu...
