-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: GL1010
Brief specifications
More details
GUILDLINE INSTRUMENTS GL 1010 SERIES of Resistance Transfer Standards are very stable and low uncertainty calibration laboratory standards for customers looking to replace the old ESI 1010 series. PRODUCT FEATURES Transfer Accuracy better than 1 ppm Exact ESI SR1010 Series Replacement Six models Available with decade values from 1Ω/step to 100 kΩ/step Establish decade resistances from 0.1 Ω to 1 MΩ Each device configurable to 10R, 1R, and R/10 Leakage Resistance >1012 Ω from terminal to case ISO 17025 Accredited Calibration Only Manufacturer that can provide fully automated calibration solutions to support the SR/GL 1010 Series
Документация
GL1010 SERIES
Featured Products
-327x226.jpeg)
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes t...
The XTP601 Oxygen Analyzer for safe or hazardous areas is a robust, linear and stable device that is used for measurements in gases such as biogas, methane, hydrogen, nitrogen or carbon dioxide. The analyzer meets the requirements of IEC615...
Additel’s 282 Reference Thermometer Readout delivers the best possible accuracies and features in the palm of your hand With accuracy capabilities on par with laboratory grade thermometers, the ADT282 is capable of handling even your most c...
Critical / Sonic nozzles
Flow measurement elements with highest accuracy
EP Ehrler Prüftechnik manufactures sonic nozzles in the flow range from 0.005 up to 2000 m³/h. In addition to the standard range, EP Ehrler Prüftechnik offers cu...
Fluke P5540 Metric Adapter Set:
Includes adapters: M14x1.5, M20x1.5, 1/8" BSP, and 1/4" BSP female.
Designed for use with Fluke P5500 series hydraulic and pneumatic comparison test pumps, excluding P5514B.
Fluke P5541 BSP Adapter Set:
...
This small transmitter is a rugged, self-contained hygrometer for the measurement of trace moisture content in ultra-high purity gases.
Simple to use and install, the Pura is available in 2-wire, 3-wire and hazardous area versions and is f...
The ROTRONIC probe type HC2-AW-(USB) measures the humidity and the temperature of hygroscopic products. The digital probe signal is processed by an indicator such as the HygroLab C1 or the HP23- AW-A, or from a pc (HC2-AW-USB)...
GUILDLINE INSTRUMENTS provides two series of the best performing, most compact, wide-band AC current shunts that are commercially available PRODUCT FEATURES High Current Values to 100 A AC/DC Difference Essentially Zero at Power Frequencies...
The Condumax II hydrocarbon and water dew-point analyzer provides continuous, automatic measurements of these two critical parameters of natural gas quality. It uses the ‘Dark Spot’ direct chilled-mirror technique to measure hydrocarbon dew...
The ADTS553F air data test set is a portable three-channel flightline pitot static tester. It provides pitot static air data validation, leak testing, fault-finding and avionics instrumentation testing for any aircraft requiring angle of at...
A lightweight and compact binary gas analyzer for measuring gas mixtures – such as air in argon or carbon dioxide in air. Suitable for installation in safe areas the XTC501 has a tough, IP55-rated housing. Available with an optional display...
-327x226.jpg)
-327x226.jpg)
The 920 and 920HV High Pressure Test Pumps are hand operated pressure pumps designed to generate pressure from 95% vacuum to 3,000psi (200bar). With a long lever, it just takes 40 seconds to reach 3,000 psi (200 bar). A high-quality screw p...
The 12X series pressure manifolds are designed for expanding pressure test ports during pressure calibration.
The Additel 121 pressure manifold is used for pneumatic pressure calibration up to 3,000 psi (200bar), while the Additel 123 mani...
-327x226.jpg)
-327x226.jpg)
The Druck DPI612 Series Pressure Calibrator is an innovative and versatile precision pressure measurement and generation tool designed for professional use.
The Druck DPI612 series has three models to create pressures from 95% vacuum to ...
ProWeb enables creation of an online database of certificates in PDF format that can be accessed through a web portal. Enable simple access to historical certificates for both yourself and your customers, with password protected logins and ...
Rotronic BL-1D (humidity, temperature, pressure and dewpoint), HL-1D (humidity and temperature), TL-1D (temperature) data logger...
Success in motorsport depends on hundreds of components working together under extreme conditions, and Baker Hughes continues to develop Druck pressure transducers that give the ultimate performance. Druck motorsport sensors have become a w...
The OptiCal is a premium, self-contained calibrator for humidity sensors. It features an integrated chilled-mirror reference which enables the operator to perform calibrations that are traceable to national standards.
The calibration chamb...
Additel’s 151 pressure modules have been designed with flexibility and efficiency in mind and can easily be swapped out as needed to meet changing needs and workloads. Higher pressure ADT151 modules cover two separate pressure ranges and co...
