-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: 8400B
Brief specifications
More details
The 8400B “Autosal” Laboratory Salinometer is the “Industry Standard” for salinity measurements. A very stable temperature control bath and heat exchanger maintain the sample at a precisely defined temperature during analysis, avoiding the need for temperature compensation. Accuracy is better than 0.002 Equivalent Practical Salinity Units (PSU). PRODUCT FEATURES Accuracy <0.002 Salinity Range 2 to 42 in Salinity Improved Temperature Stability No Temperature Compensation Required Small Samples & Rapid Measurements Data Logging Standard Improved Maintainability
8400B “Autosal” Laboratory Salinometer
Featured Products
Isotech has produced over 200 high temperature thermometers which have been sold world-wide for use up to the silver point. As a consequence of our predelivery testing alone we have probably made more silver point calibrations than anyone e...
The Rotronic HygroFlex5-EX series consists of two-channel transmitters for the exact measurement of humidity and temperature in explosive atmospheres. This device conforms to the latest international standards. The robust aluminium HF5-EX h...
-327x226.jpg)
-327x226.jpg)
The 925 Hydraulic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 85% vacuum to 6,000psi (400bar). With the patented screw press technology, the high pressure can be easily generated, as well as increa...
The HygroFlex1 series is the latest development in inexpensive HVAC transmitters for relative humidity and temperature. The devices are equipped
with the tried-and-tested Rotronic Hygromer® IN-1 sensor and boast unbeatable value for money....
-327x226.jpeg)
-327x226.jpeg)
Precision calibration of thermometers calls for the use of stirred liquid calibration baths. The Hydra models set new standards in terms of price to performance ratio. Now Calibration Engineers and Metrologists can choose from a range of ba...
With advanced microprocessor technology and state-of-the-art silicon pressure sensors, Additel’s 158Ex series Digital Pressure Modules provide an accurate, reliable, and economic solution for wide range of pressure applications. Our intrins...
Modular system transit case (P/N IO620-CASE-4)
A rigid transit case with wheels and an extendable handle. Accommodates two PV62XG pressure stations, DPI620G, MC620G and PM620 modules, with ample storage space for accessories. Size: 736 mm x...
-327x226.jpeg)
-327x226.jpeg)
Isotech first introduced the Model 988 to assist in relation to the SARS outbreak during the early 2000s. Used to increase the accuracy of thermal imagers being used to measure human skin temperature in temperature screening of applications...
-327x226.jpg)
The 901A Low Pressure Test Pump is a hand operated pressure pump designed to generate pressures from -6 psi (-0.4 bar) to 6 psi (0.4 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up...
P5521 and P5522 Liquid-toLiquid Separators
These liquid-to-liquid separators connect directly to the test port of a hydraulic deadweight tester or comparison test pump. A flexible diaphragm separates the fluids, protecting the calibrator...
-327x226.jpeg)
-327x226.jpeg)
Fast-Cal – the product range you designed During early 2004 20 experienced engineers from many parts of the world were asked to produce their ideal specification for industrial calibration. Their top ten requirements, in order of priority, ...
DISCONTINUED. RECOMMENDED REPLACEMENT ADT680A
We designed the 680 series digital pressure gauges with two main objectives in mind. First, to provide an affordable digital gauge to replace mechanical gauges. If you’re looking to move from...
Additel ACal (9530) is a powerful software package designed for varying degrees of automation of calibrations and management of your laboratory. ACal combines pressure and temperature instrument calibration automation features with laborato...
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories ar...
A high pressure hydraulic hose rated to 1,000 bar (15,000 psi) and terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. The hose is self sealing to avoid leakage...
The Additel ADT103 is a versatile adapter kit designed for precision and ease of use in pressure calibration tasks. It includes hand-tight quick connectors compatible with various male and female thread types such as NPT, BSP, and metric co...
-327x226.jpg)
-327x226.jpg)
The Druck DPI612 Series Pressure Calibrator is an innovative and versatile precision pressure measurement and generation tool designed for professional use.
The Druck DPI612 series has three models to create pressures from 95% vacuum to ...
-327x226.jpeg)
The Water Triple Point is the most important fixed point, the only point common to the ITS-90 and the Thermodynamic Temperature Scale. It is an essential reference point for every temperature laboratory. The Jarrett-Isotech cells are the be...
The most used temperature for calibration is 0°C. The normal way of creating 0°C is via a mixture of ice and water in a Dewar Flask. However, this can give errors of up to 4°C because water is densest at 4°C and so as the ice melts the temp...
