Каталог
Назад

Tek Know Ukraine

Solution for metrology

With us expertly :)

AII GPR-1500 PPM Oxygen Analyzer/ Transmitter

-Accuracy: < 2% of FS range under constant conditions

Analysis: 0-10, 0-100, 0-1000 PPM, 0-1%, 0-25% (CAL) FS Auto-ranging or manual lock on a single range

Application: Oxygen analysis in inert, hydrocarbon, helium, hydrogen, mixed and acid (CO2) or atmospheres in glove boxes

Area Classification: General purpose or Certified for use in hazardous areas

Enclosure: Painted aluminum or NEMA Type 3R for rain in outdoor applications (UL) NEMA 4X (ATEX)

Flow: Not flow sensitive; 1-2 SCFH flow rate recommended

Pressure: Atmospheric; Flowing system: inlet - regulate to 5-30 psig, vent - atmospheric or return controlled atmosphere

Power: 18-24 VDC two wire loop; 12-28 VDC (cUL and ATEX Certified) 110-220 VAC (ATEX Certified)

Sample System: Glove box Sample Calibration Module (pictured right) or Sample flow meter; options available, see other side; Unique liquid drain sensor manifold, flow indicator

Sensor Model: GPR-12-333-M for non-acid (CO2) gas streams XLT-12-333-M for gases containing > 0.5% CO2

Operating Range: 5ºC to 45ºC (GPR sensor), -10ºC to 45ºC (XLT sensor); -10ºC to 45ºC (GPR sensor); -18ºC to 45ºC (XLT)

Brief specifications


More details

A wall mounted oxygen analyzer in a NEMA enclosure, suitable for indoor or outdoor. This single channel oxygen monitor is supplied with a stainless steel O2 sensor housing for trace oxygen gas analysis in safe as well as hazardous areas where ATEX approval is needed. The low detection limit of 0.05ppm allows a minimum oxygen measurement range of 0 to 10 ppm O2. Ideal for clean gas applications and when used with the XLT oxygen sensor type it allows measurement in pure carbon dioxide. The Analytical Industries long-life oxygen sensors are maintenance-free sealed electrochemical cells that don’t need top up of electrolyte and can be exchanged in few minutes.


ВимірюванняГенерація (Імітація)


AII GPR-1500 PPM Oxygen Analyzer/ Transmitter

-Accuracy: < 2% of FS range under constant conditions

Analysis: 0-10, 0-100, 0-1000 PPM, 0-1%, 0-25% (CAL) FS Auto-ranging or manual lock on a single range

Application: Oxygen analysis in inert, hydrocarbon, helium, hydrogen, mixed and acid (CO2) or atmospheres in glove boxes

Area Classification: General purpose or Certified for use in hazardous areas

Enclosure: Painted aluminum or NEMA Type 3R for rain in outdoor applications (UL) NEMA 4X (ATEX)

Flow: Not flow sensitive; 1-2 SCFH flow rate recommended

Pressure: Atmospheric; Flowing system: inlet - regulate to 5-30 psig, vent - atmospheric or return controlled atmosphere

Power: 18-24 VDC two wire loop; 12-28 VDC (cUL and ATEX Certified) 110-220 VAC (ATEX Certified)

Sample System: Glove box Sample Calibration Module (pictured right) or Sample flow meter; options available, see other side; Unique liquid drain sensor manifold, flow indicator

Sensor Model: GPR-12-333-M for non-acid (CO2) gas streams XLT-12-333-M for gases containing > 0.5% CO2

Operating Range: 5ºC to 45ºC (GPR sensor), -10ºC to 45ºC (XLT sensor); -10ºC to 45ºC (GPR sensor); -18ºC to 45ºC (XLT)

Featured Products

  IO620-IDT622 Dirt moisture trap
  IO620-IDT622 Dirt moisture trap
Prevents contamination of the PV621, 622 and 624 pneumatic systems and cross contamination from one device under test to another. The IDT connects directly to the PV621, 622 and 624 pressure port and replicates the quick fit connection for ...
Код: IO620-IDT622
ADT912A  Low Pressure Test Pump
ADT912A  Low Pressure Test Pump
The ADT912A Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 60 psi (4 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up...
Код: ADT912A
Software Package ELMA
Software Package ELMA
Software Package ELMA is dedicated for electricity meter testing and calibration. The package contains routines for control of hardware, data acquisition, evaluation of measurements, meter data exchange, output of documents, data archiving,...
Код: ELMA
7220 Asynchronous Power Analyzer
7220 Asynchronous Power Analyzer
Guildline Instruments 7220 Asynchronous Power Analyzer is the latest in a 3 phase AC Power Measurement Laboratory Standard designed for the most demanding power measurement applications today. Innovative, patented sensing technology provide...
Код: 7220
3000RS precision resistance standard precision references and standards
3000RS precision resistance standard precision references and standards
The 3000RS is a modern precision resistance standard offering annual stabilities of better than 5ppm without the requirement for an oil bath, with temperature co-efficients as low as 0.1ppm/°C Using ultra-high precision, 4 wire hermetically...
Код: 3000RS
Small Hot Plate Model 983
Small Hot Plate Model 983
The Isotech Small Hotplate is a lightweight portable calibration system purpose designed for surface mounted sensors. The flat surface plate is made from precision-machined aluminum. The sensor to be tested is simply placed on the surface, ...
5.0000/5 1text_less_review
Код: 983
4610M ADVANCED MULTIPRODUCT CALIBRATOR
4610M ADVANCED MULTIPRODUCT CALIBRATOR
4610M DC VOLTAGE 0 - ±1025V DC CURRENT 0 - 30A AC VOLTAGE 2mV - 1000V, 10Hz - 1MHz AC CURRENT 20uA - 30A, 10Hz - 30kHz RESISTANCE (PASSIVE) 0 Ohms - 1 GOhm CAPACITANCE (PASSIVE) 1nF - 10uF FREQUENCY 10Hz - 1MHz TEMPERATURE (THERMOCOUPLE) J ...
Код: 4610M
GL1010 SERIES
GL1010 SERIES
GUILDLINE INSTRUMENTS GL 1010 SERIES of Resistance Transfer Standards are very stable and low uncertainty calibration laboratory standards for customers looking to replace the old ESI 1010 series. PRODUCT FEATURES Transfer Accuracy better t...
Код: GL1010
Filters and Filter Carriers for Rotronic HC2A Humidity Probes
Filters and Filter Carriers for Rotronic HC2A Humidity Probes
Filter carriers protect the humidity and temperature sensors and probes against mechanical damage. Filters act as a protective barrier against contaminants/pollutants that can influence the sensor. When choosing the correct combination of f...
Код: HC2A
Chilled Mirror Hygrometer - Michell S8000 Remote
Chilled Mirror Hygrometer - Michell S8000 Remote
The S8000 Remote is a compact chilled mirror hygrometer with a remote sensor. It provides it provides fundamentally derived, high precision relative humidity readings necessary for validating the results of environmental tests. It offers a...
Код: S8000 Remote
AII GPR-3500 MO Portable Oxygen PurityAnalyzer
The GPR-3500MO is supplied with panel mounted flow meter for maximum portability...
Код: GPR-3500
PEGASUS-T
PEGASUS-T
New Solution…to Calibrate Short Sensors at High Temperatures The Pegasus range offers extreme high temperature calibration in an easy to use portable package – ideal for the calibration of high temperature thermocouples. It has been designe...
Код: PEGASUS-T
DPI705E Handheld manometer
DPI705E Handheld manometer
The Druck DPI 705E Series of handheld pressure manometers and optional temperature indicators combine tough and rugged design with accurate and reliable measurements. Compact and robust, the DPI 705E Series is designed for single-handed op...
Код: DPI705E
Dew-Point Hygrometer - Michell SF82 Online
Dew-Point Hygrometer - Michell SF82 Online
The SF82 Online has been developed as a fast-response, quick-to-install hygrometer system for the complete dew-point measurement range of -60 up to +60 °C dew point, which covers many moisture measurement applications...
Код: SF82 Online
Medium Temperature Furnace
Medium Temperature Furnace
Whilst heat pipe furnaces offer the ideal environment to melt and freeze ITS-90 Fixed Points the temperature range is limited by fluid that flows inside the pipe. Three zone furnaces can offer wider operating ranges and still meet the requi...
Код:
Humidity Transmitter HVAC - Rotronic HygroFlex HF1
Humidity Transmitter HVAC - Rotronic HygroFlex HF1
The HygroFlex1 series is the latest development in inexpensive HVAC transmitters for relative humidity and temperature. The devices are equipped with the tried-and-tested Rotronic Hygromer® IN-1 sensor and boast unbeatable value for money....
Код: HF1
Parallel Tube Liquid Bath Libra Model 785H
Parallel Tube Liquid Bath Libra Model 785H
Isotech calibration baths employ sophisticated designs to ensure calibration to the smallest of uncertainties. In 1986 Isotech purchased the interests of H N Irving & Sons Temperature division which had specialised in providing high quality...
Код: 785H
8500 Low Thermal 10 Channel Scanner low thermal scanner
8500 Low Thermal 10 Channel Scanner low thermal scanner
Automation of measurements using the 8500 Low Thermal Scanner allows a completely automated measurement system to be realised. Using the 8500 Scanner together with ProGraph software and the 8000 series multimeter provides a turnkey solution...
4.0000/5 1text_less_review
Код: 8500
P5523 Liquid-to-Gas Media Separator
For high pressure pneumatic calibrations this unit interfaces with hydraulic deadweight testers providing a rateless liquid-to gas separation. Driven by a pneumatic pressure source (nitrogen bottle) and controlled by needle valves, high pre...
Код: P5523
4Sight2 Calibration Software
4Sight2 Calibration Software
4Sight2 Calibration software is a web-based calibration management tool that helps you maintain and control your calibration environment to the highest metrology standards. 4Sight2 from Druck, a Baker Hughes business, offers easy-to-use, co...
Код: 4Sight2
Спасибо!