-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: 7340
Brief specifications
More details
GUILDLINE INSTRUMENTS provides two series of the best performing, most compact, wide-band AC current shunts that are commercially available PRODUCT FEATURES High Current Values to 100 A AC/DC Difference Essentially Zero at Power Frequencies, and < 10 ppm up to 10 kHz Phase Displacement typically 5 to 10X Better then nearest competitor from 10 kHz to 100 kHz Widest Available Bandwidth DC to100 kHz Stable up to 2 MHz Excellent 1-Year Stabilities Low Temperature Coefficients 2.5 ppm/°C Provide a 4-Wire, True Non-Inductive Patented Design 7340 Series Provides 12 Current Values from 1 mA to 100 A with Output Voltages from 0.2 to 1.0 V Ruggedized EMI Shielded Enclosure Designed for Ease of Use and Complete Operational Safety
7340 Series features High Stability, Voltage Rated AC/DC Current Calibration Standards
Featured Products
The MDM25 is a portable, battery-operated hand-held hygrometer. It displays relative humidity, temperature and one calculated value, making this hygrometer suitable for a wide range of applications. The user can choose to display either °C ...
The Fluke Calibration 6270A
Pressure Controller/Calibrator is a robust, reliable solution that lets you dramatically simplify the task of pneumatic pressure calibration. Thanks to its modular design, it is so flexible that it can be config...
PressCal Software
PressCal is a menu driven software program for pressure calculation and certificate generation using a deadweight tester as the pressure source. This software has been developed as a flexible working tool to make calibrat...
-327x226.jpeg)
-327x226.jpeg)
Multi Function: Six Modes including Dry Block and Liquid Bath Fast Response 35mm x 160mm Calibration Volume Calibrate Whole Measurement Loop Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probe...
This dedicated apparatus has more than 35 years of proven use and is widely used by the worlds’ leading NMIs. In a recent International study cells from 21 of the world’s leading laboratories were inter-compared; the study used two Isotech ...
-327x226.jpeg)
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide The Gemini range of Dry Blocks have high capacity allowing a large number of probes to be calibrated together. They are also suitable to accept large diameter probes with the block volum...
Guildline Instruments 7334 Series of AC/DC Air Resistance Standards are designed for high accuracy resistance calibration in air, without the need for stabilization in a temperature controlled bath. PRODUCT FEATURES Typical AC/DC Error ...
The P3000 Series is the culmination of over 50 years experience in the production and design of primary pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation these deadwe...
If you are serious about portable temperature calibration tools, then you know a good dry well calibrator is more than just a stable heat source. The Additel 875 Series Dry Well Calibrators combine excellent performance in stability, radial...
Calibration test bench for gas meters
Calibration of domestic gas meters (G1,6…G400)
The test bench is especially designed for the calibration of domestic gas meters (diaphragm gas meters, ultrasonic gas meters, thermoelectric gas met...
The Reference Standard RS 3330 is designed for the highest possible precision meter for quantities related to electrical power and energy measurements. The Reference Standard is designed to meet all requirements put on a reference standard ...
The DT722 is a rugged industrial relative humidity and temperature transmitter designed for process applications where accurate, stable measurement and control of humidity and temperature is required...
The next generation pressure sensor
One Sensor. No Compromises.
Discover ADROIT6200 - the first release of ADROIT6000 industrial pressure sensors family.
ADROIT6200 is a high performance, robust pressure measurement device. It combin...
These modular pressure controllers combine cutting-edge control/measurement technology, modular design, and user-friendly features. The Additel 783 controller series is optimized for high speed to pressure without compromising accuracy and ...
Isotech Nitrogen Boiling Point Apparatus is designed specifically to realise and maintain the liquid/vapour equilibrium (boiling point) of nitrogen or argon, for the calibration of thermometers on the International Temperature Scale of 1990...
The GPR-7500 analyzer utilizes the low-power electro-chemical sensor technology to provide a cost-effective and easy to maintain online-installation hydrogen sulfide measurement in a small package. The GPR-7100 is a portable H2S analyzer ve...
The 33XXA Series multiproduct calibrators are modular versions of the class leading 3000A Series Calibrators. Designed to reduce cost, the 33XXA Series feature 0 - 20V DC output as standard with a wide range of options including 20V - 1000V...
Druck DPI611 is a portable pressure calibrator that provides accuracy, reliability and ease of use. It combines a compact design with high performance, making it the ideal choice for calibration professionals.
This calibrator is capable ...
The higher temperature Isotech Blackbody Fixed Point Cells consist of high purity metals within a graphite body. Graphite reacts with air to form Carbon Dioxide. The rate of the reaction is temperature dependant. The effect is small at low ...
The HygroFlex5 series and HygroFlex 8 series is compatible with HC2A probes which offers a high variety in temperature ranges, accuracy and body types. This device generation also boasts a unique calibration and adjustment process as well a...
