-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: 5030
Brief specifications
More details
GUILDLINE INSTRUMENTS 5030 SERIES are precision air baths providing uniform constant temperature over a range of operating environments. To improve measurements and reduce the uncertainty contribution from temperature effects, these high quality Precision Air Baths are an excellent alternative or supplement to traditional oil baths and laboratory environmental control. PRODUCT FEATURES Excellent Temperature Stability, Better Than 0.015 ˚C over 24 Hours Only Precision Air Bath that Includes a Separate PRT to Report the True Temperature from Anywhere Inside the Bath Chamber Temperature Range 15 ˚C to 50 ˚C Cooling Capacity up to 6 ˚C Below Ambient Dual Fan - Forced Air Circulation Ensures Uniform Temperature Large Volume Enclosure – Over 82 Liters Enclosure is Fully EMI Shielded Convenient Front Access Door; Side Access Hole for Cables and Probes Perfect for Checking Temperature Coefficients of Precision Air Resistors 5032 Fully Programmable Via the IEEE-488.2 or RS 232 Standard Interfaces
5030 SERIES
Featured Products
The Additel ADT103 is a versatile adapter kit designed for precision and ease of use in pressure calibration tasks. It includes hand-tight quick connectors compatible with various male and female thread types such as NPT, BSP, and metric co...
Calibration test bench for gas meters
Calibration of domestic gas meters (G1,6…G400)
The test bench is especially designed for the calibration of domestic gas meters (diaphragm gas meters, ultrasonic gas meters, thermoelectric gas met...
The 8370A measures and controls pressures from atmosphere to 107 MPa. It can be configured with ranges as low as 700 kPa.
Fluke Calibration’s unique control technology enables you to use these calibrators at low or high pressures, all in t...
The HygroFlex3 series is ideal for all applications where good accuracy measurement of humidity and temperature is of critical importance. The transmitters can be used in a wide range of industries...
The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and...
Transmilles ProCal software provides a cost effective and easy to use solution for automating calibration, from a single workstation through to a network multi discipline network. ProCal comes pre loaded with drivers for many common instrum...
Guildline Instruments 99100A Capacitance Reference System provides for ratio calibration of Capacitance Measurement Systems. The 99100A System comprises a number of highly stable hermetically sealed capacitors with a switch array and a vari...
-327x226.jpg)
DPI 800/802 Druck Pressure Indicator/Loop Calibrator The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular proce...
-327x226.jpeg)
The Oceanus-6 PLUS has all the advantages of the Isocal-6 models but with a substantially larger calibration volume, 50mm diameter by 300mm deep. The Oceanus-6 can be used as a Dry Block, a Liquid Bath, a Blackbody Source for infrared therm...
-327x226.jpeg)
Isotech calibration baths employ sophisticated designs to ensure calibration to the smallest of uncertainties. In 1986 Isotech purchased the interests of H N Irving & Sons Temperature division which had specialised in providing high quality...
P5521 and P5522 Liquid-toLiquid Separators
These liquid-to-liquid separators connect directly to the test port of a hydraulic deadweight tester or comparison test pump. A flexible diaphragm separates the fluids, protecting the calibrator...
Guildline Instruments 7330 Series of Oil Based Resistance Standards are designed for high accuracy resistance calibration in oil (Fluid Baths) or in air. PRODUCT FEATURES Typical AC/DC Error ...
The insertion probe is suitable for measurement in dust-free bulk materials, bricks, concrete, etc (10 mm insertion probe: measurements in dusty bulk materials such as flour, sugar, etc.). It measures humidity and temperature and calculates...
-327x226.jpeg)
The microsKanner can be used with any member of the microK family to add further channels, up to a maximum of 90 expansion channels. Easy to Use: The use of plug-and-play technology means that the extra channels appear automatically on your...
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories ar...
The higher temperature Isotech Blackbody Fixed Point Cells consist of high purity metals within a graphite body. Graphite reacts with air to form Carbon Dioxide. The rate of the reaction is temperature dependant. The effect is small at low ...
The Fluke Model P5551 Pointer Remover/Punch is a specialized tool designed to efficiently remove and accurately refit the pointer of a pressure gauge. It is particularly useful for maintenance and calibration tasks involving pressure measur...
PM200 Pressure Measurement Modules
Key features:
- 0.02% FS specification makes it ideal for calibrating or testing pressure dial gauges, lower accuracy transmitters, or pressure switches.
- Rugged silicon pressure sensor design allo...
-327x226.jpeg)
The multi-functions of the Oceanus-6 is a unique concept from Isotech, so unique that it is currently the subject of a patent application. The Oceanus-6 is a complete calibration laboratory working over the temperature range 45°C below ambi...
GUILDLINE Instruments 6530 TeraOhm Bridge-Meter Series is the latest innovation in High Resistance and Ultra-High Resistance Measurements. These Bridge-Meters incorporate the latest technology for high resistance measurements providing Metr...
