-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: XTC501
Brief specifications
More details
A lightweight and compact binary gas analyzer for measuring gas mixtures – such as air in argon or carbon dioxide in air. Suitable for installation in safe areas the XTC501 has a tough, IP55-rated housing. Available with an optional display and 4-button interface, the analyzer is easy to install, configure and operate.
Because the thermal conductivity sensor has no consumable parts and will last the lifetime of the analyzer, XTC501 has a competitively low lifetime cost of ownership and is simple to maintain.
Michell XTC501 Thermal Conductivity Analyser
- Hydrogen, Binary Gas and Gas Mixtures Measurement
- Features
-
- Compact, lightweight and easy to install
- Intuitive user interface
- Tough IP55 housing
- Low cost of ownership due to minimal maintenance
- Measurement ranges from 0 to 5% up to 0 to 100% and 50/80/90 to 100%
- Accuracy of better than ±1% full scale
- 2 x 4–20 mA outputs and MODBUS RTU over RS485 protocol as standard
Featured Products
A high-speed portable dew-point hygrometer for rapid spot-check measurements of dew point or moisture content in compressed air, natural gas, high voltage switchgear quench gas and many other applications. The sensor responds quickly to cha...
BHGE is the foremost supplier of air data test systems, with over 25 years experience in the design and manufacture of advanced pressure measuring instruments and sensors. The ADTS 405 is a series of reliable, high accuracy, air data test s...
-327x226.jpeg)
The Hyperion R Portable Blackbody Calibration Source allows for calibration of non-contact infrared thermometers over the temperature range -20°C to 125°C. One application is the calibration of non-contact medical thermometers. With the sud...
As industry increasingly moves to high precision instrumentation there is an increasing need to utilise very high performance test and service equipment. Model 006-A is a laboratory accuracy six decade resistance box with a total resistance...
-327x226.jpeg)
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes t...
GUILDLINE INSTRUMENTS 6634A SERIES is a modular series of Resistance Standards that can be rack mountable or simply set on a bench. The 6634A Series provides a set of up to 10 precision resistance standards enclosed in a temperature control...
-327x226.jpeg)
The Gemini R 550 Portable Blackbody Calibration Source allows for calibration of noncontact infrared thermometers over the temperature range 30°C to 550°C. It is suitable for use as a primary radiation source for infrared thermometers. Labo...
-327x226.jpeg)
When the high accuracy of the Gemini R is not necessary this product offers a cost effective solution for the calibration and testing of infrared thermometers. The Greybody Model 975 gives fast accurate results with a larger sensing area. A...
-327x226.jpg)
Whilst heat pipe furnaces offer the ideal environment to melt and freeze ITS-90 Fixed Points the temperature range is limited by fluid that flows inside the pipe. Three zone furnaces can offer wider operating ranges and still meet the requi...
The PV212 is a high-quality hand pump designed to quickly and easily generate hydraulic pressures. The construction materials make it compatible with most fluid media and an optional seal kit can be supplied for many applications. The built...
Laminar Flow Elements
Flow measurement elements with highest accuracy
EP Ehrler Prüftechnik manufactures LFEs in the flow range from 0.012 to 4000 m³/h. In addition to the standard range, EP offers customer-specific LFEs that are perf...
The Pressurements P3800 Series is the culmination of over 50 years experience in the design and manufacture of primary pressure standards. With features and options designed to improve accuracy, increase reliability, and simplify operation,...
The P3000 Series is the culmination of over 50 years experience in the production and design of primary pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation these deadwe...
Additel LogII is a real-time data logging and graphical software for the ADT68x series digital Pressure gauges, the ADT67x series digital pressure calibrators, and the ADT76x Automatic Pressure Calibrators. Data can be recorded in real-time...
SMF® – SonicMasterFlow®
Highly precise flow measurement of gases and air
The SMF® – SonicMasterFlow® series are calibration systems for high-precision flow measurement of air and other gases (optional) (volume and mass flows) using cr...
The HygroCal100 provides a stable test chamber to quickly evaluate the performance of relative humidity sensors across a wide range of 5 to 95% relative humidity.
Its intuitive 4” touch screen display and interface allows the probes under ...
The accuracy of the power and energy reference meter is available up to 0.01 %. The reference meter measures all main and influencing quantities inclusive harmonic analysis and distortion of the test signals. The available power and the max...
The MP100A is a combined humidity and temperature probe designed primarily for meteorological and general outdoor applications. Operation from DC voltage and low power consumption make the MP101A particularly suitable for operation at remot...
The S8000 Remote is a compact chilled mirror hygrometer with a remote sensor. It provides it provides fundamentally derived, high precision relative humidity readings necessary for validating the results of environmental tests.
It offers a...
-327x226.jpeg)
-327x226.jpeg)
Fast-Cal – the product range you designed During early 2004 20 experienced engineers from many parts of the world were asked to produce their ideal specification for industrial calibration. Their top ten requirements, in order of priority, ...
