-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: QMA401
Brief specifications
More details
The next generation Advanced Quartz Crystal Microbalance analyzer from Michell Instruments is designed to provide reliable, fast and accurate measurement of trace moisture content in a variety of applications where keeping moisture to a minimum is of critical importance.
The analyzer provides consistently accurate measurements of trace moisture. This consistency is achieved using a self-calibration system, which adjusts the sensor with reference to an internal moisture generator. The moisture generator is supplied with a calibration traceable to NPL and NIST, so long term stability of its measurements is guaranteed.
Self-Calibrating Trace Moisture Analyzer - Michell QMA401
- Low Maintenance Quartz Microbalance Technology
- Features
-
- Precision measurement from 0.1 to 2000ppmV
- Fast response in both dry to wet and wet to dry transitions
- Simple, low cost, on-site maintenance with long service intervals
- Dryer can be replaced by the user in 10 minutes
- Accuracy of 0.1ppmV or 10% of reading, whichever is greater
- Intuitive user interface
- Ethernet or USB digital communications
- SD card data logging
- Optional internal sample handling and bypass loop
Featured Products
4610M DC VOLTAGE 0 - ±1025V DC CURRENT 0 - 30A AC VOLTAGE 2mV - 1000V, 10Hz - 1MHz AC CURRENT 20uA - 30A, 10Hz - 30kHz RESISTANCE (PASSIVE) 0 Ohms - 1 GOhm CAPACITANCE (PASSIVE) 1nF - 10uF FREQUENCY 10Hz - 1MHz TEMPERATURE (THERMOCOUPLE) J ...
Designed with low cost, portability and ease of use in mind, the 2080 provides on or off site verification of RCD testers, Loop testers, Continuity and Insulation testers and multifunction testers. The 2080 is simple to use and provides the...
The DPI 610 Aeronautical version is a low cost yet flexible portable calibrator for precision leak testing of aircraft pitot static systems. Configured as a single channel unit for testing either altitude or airspeed parameters, it is fully...
PRTCalc is a free utility for those involved with PT100 platinum resistance thermometers. It allows for the accurate conversion of resistance to temperature or temperature to resistance. PRTCalc conforms with IEC 751 Amendment 2: December 1...
A protective carrying case with shoulder strap and large pocket for accessories. Also accommodates the assembled system including the DPI620G and PM620...
The HF73A transmitter series is designed for fixed installation in industrial applications where conditions are within the range of 0 to 100 %rh and -100 to 150 °C (-148 to 302 °F). The probe of the HF73A can survive exposure to temperature...
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets.
Safe area use 1 m/3.28 ft pneumatic hose. Maximum pressure 20 bar/300 psi...
P5514B Hydraulic Pressure Comparator
The P5514B Hydraulic Pressure Comparator is a simple, robust and economical pressure test pump for calibrating gauges, switches and transducers with accurate, fine adjust capabilities. It generates pres...
DISCONTINUED. RECOMMENDED REPLACEMENT ADT681A
With advanced microprocessor technology and state-of-the-art silicon pressure sensors, the 681 series digital pressure gauges provide an accurate, reliable, and economic solution for a wide r...
The 8100 Series from Transmille is the most advanced multimeter available on the market. Featuring a full colour screen, the 8100 Series offers a wide range of functionality and covers a wide range of input parameters whilst achieving break...
To calibrate gauges with the pressure connection on the rear (for example, panel mount gauges) in their correct operating position, an angle adaptor should be used. The angle adapter uses the standard gauge adapters and positions the gauges...
Suitable for trace oxygen measurements from 0.1 ppm through to purity applications at 100% oxygen, these rugged portable instruments share the same advanced sensor technology as the online process oxygen analyzers ensuring confidence in the...
These Platinum / Palladium Thermocouples (Pt/Pd) are manufactured by the National Physical Laboratory (NPL) who have developed a novel physical mechanism which mitigates the mechanical stresses caused by the different thermal expansion of P...
An economical solution for low-pressure applications, we offer three cylinder hand pump options with a modular design that makes field maintenance quick and easy. Our DP0V model provides reliable test pressure up to 125 psi (860 kPa), the D...
Guildline Instruments 5600 SERIES is the latest in high precision fluid/oil baths providing uniform fluid temperature over a range from -5 °C to 55 °C. This Series of Fluid Baths is designed for both metrology and oceanographic applications...
-327x226.jpeg)
The most accurately defined temperatures are those defining points (fixed points) of ITS-90. The leading Primary Laboratories use large fixed point cells in deep calibration furnaces that utilise heat pipes to eliminate temperature gradient...
The ADTS552F air data test set is a portable two-channel flightline pitot static tester with large pitot static volume capability for use on a wide range of aircraft, from light aircraft to wide body passenger and freight aircraft. It provi...
A low-cost, self-contained sampling system, with filtration and flow control, for measurement of either pressure or atmospheric dew points...
The S4000 TRS measures very dry dew points down to -100 °C (-148 °F) with ±0.1 °C accuracy. It features excellent stability and reproducibility across its entire measurement range and is used in calibration and standards laboratories worldw...
-327x226.jpeg)
Precision calibration of thermometers calls for the use of stirred liquid calibration baths. The Hydra models set new standards in terms of price to performance ratio. Now Calibration Engineers and Metrologists can choose from a range of ba...
