-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: DPI610
Brief specifications
More details
The DPI 610 Aeronautical version is a low cost yet flexible portable calibrator for precision leak testing of aircraft pitot static systems. Configured as a single channel unit for testing either altitude or airspeed parameters, it is fully self-contained with manual pressure generation and venting facilities. Scaling is provided in aeronautical units and the instrument also includes switch tests and other functions. The pneumatics enable a maximum rate of climb of 6,000 ft/min when used with a 5m length x 6mm bore hose at altitudes below 15,000ft. An AN4 pressure fitting is provided and an integral vent valve for restoring ambient ground pressure conditions.
Документация
DPI610 Aeronautical Portable Aircraft Leak Tester
- Altitude and Airspeed leak testing
- Altitude and Airspeed switch testing
- Integral pressure/vacuum pump
- Accuracy to 14ft and 0.7kts
- Large, task oriented display
Featured Products
The Portable Test Equipment consists of an integrated three-phase current and voltage source and a three-phase electronic reference standard of accuracy class 0.05% or 0.02%...
-327x226.jpg)
PM620 now incorporates our unique range of TERPS resonant silicon pressure sensor technology, the PM620T and the PM620TS intrinsically safe version. Providing up to four times greater stability and higher accuracy than current pressure meas...
-327x226.jpg)
Isotech’s Quick Cal range of testers are ideally suited to the less exacting applications where our larger, better specified baths are unnecessary. The Low Temperature Quick Cal covers the temperature range of -12°C to +140°C, making it ide...
Isotech Nitrogen Boiling Point Apparatus is designed specifically to realise and maintain the liquid/vapour equilibrium (boiling point) of nitrogen or argon, for the calibration of thermometers on the International Temperature Scale of 1990...
The 8270A measures and controls pressures from vacuum to 44 MPa (6400 psi). It can be configured with ranges as low as 100 kPa (15 psi).
Fluke Calibration’s unique control technology enables you to use these calibrators at low or high pres...
If you are serious about portable temperature calibration tools, then you know a good dry well calibrator is more than just a stable heat source. The Additel 875 Series Dry Well Calibrators combine excellent performance in stability, radial...
The DPI104 is a microprocessor-controlled digital pressure gauge that combines precision and functionality in a compact, robust, and simple-to-use package. The DPI 04 matches advanced silicon sensor technology with several convenient design...
Guildline's NEW 3210 Series of Thermometry Auto-Switch with Pre-Heat automates temperature measurements including fixed points and thermometer calibrations. Up to eight PRTs or other temperature devices can be connected with individually pr...
Additel LogII is a real-time data logging and graphical software for the ADT68x series digital Pressure gauges, the ADT67x series digital pressure calibrators, and the ADT76x Automatic Pressure Calibrators. Data can be recorded in real-time...
7750i Air Data Test Set
The Model 7750i Air Data Test Set represents the latest generation Air Data Test Set (ADTS), incorporating a unique quartz sensor having unequalled precision and long term stability with the latest pressure control ...
The Easidew sensor is a moisture meter that measures both dew point and moisture content. It is simple to install as it is available with a wide range of process connections and electrical connectors. All Easidew dew-point transmitters are ...
-327x226.jpeg)
Isotech calibration baths employ sophisticated designs to ensure calibration to the smallest of uncertainties. In 1986 Isotech purchased the interests of H N Irving & Sons Temperature division which had specialised in providing high quality...
-327x226.jpg)
PM705E is a remote pressure module designed for high-precision pressure measurement of liquid and gaseous media in industrial and laboratory applications. The module provides reliable data readings under conditions of increased vibration an...
Additel's 260Ex is an intrinsically safe handheld multichannel reference recorder with 8 different channel configurations. Armed with Additel’s most versatile and capable handheld, technicians are now able to measure and collect data for pr...
The 1000 series has transformed the world of calibration - its innovative design utilises the latest in cutting edge digital and analogue electronics, combined with the latest manufacturing techniques to create the world's first ultra-porta...
A wall mounted oxygen analyzer in a NEMA enclosure, suitable for indoor or outdoor. This single channel oxygen monitor is supplied with a stainless steel O2 sensor housing for trace oxygen gas analysis in safe as well as hazardous areas whe...
Includes a range of accessories from power cables to extended hoses and more...
The GPR-1800 series of intrinsically safe trace oxygen analyzers are designed for use in demanding process environments where the low detection limit down the AII’s industrial oxygen sensors can be well utilized. Typical for Analytical Indu...
The XZR500 oxygen analyzer from Michell Instruments is designed to determine the excess air required for optimum combustion. It uses advanced Zirconium Oxide technology to measure levels of oxygen in harsh conditions such as boilers, incine...
