-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: PDCR/PTX1800
Brief specifications
More details
The PDCR1800 transducer (mV output) and the PTX 1800 transmitter (4 to 20 mA output) are the latest generation of fully submersible titanium high-performance sensors for the measurement of hydrostatic liquid levels. The 1800 Series incorporates many enhanced features gained from experience in supplying thousands of sensors for small- and large-scale installations worldwide. Example applications include: Potable water - From groundwater borehole to surface water level measurements in rivers, canals, and reservoirs. Wastewater and remediation - Monitoring of secondary and outflow sewage levels and contaminated groundwater levels in landfill sites. Tank Level - From land-based liquid storage vessels to on-board ship ballast tank monitoring. Sea Water - Marine environmental applications, including tide gauging, coastal flood protection, and wave profiling, amongst others.
PDCR/PTX1800 Series Submersible Pressure Transducers
- Ranges from 0.75 mH2O to 600 mH2O
- Accuracy ±0.10% full scale (FS) best straight line (BSL)
- Fully welded 17.5 mm diameter titanium construction
- Polyurethane and hydrocarbon resistant cables
- Full range of installation accessories
Featured Products
-327x226.jpg)
-327x226.jpg)
The 920 and 920HV High Pressure Test Pumps are hand operated pressure pumps designed to generate pressure from 95% vacuum to 3,000psi (200bar). With a long lever, it just takes 40 seconds to reach 3,000 psi (200 bar). A high-quality screw p...
-327x226.jpeg)
First introduced to assist in relation to the SARS outbreak during the early 2000s the Model 988 is now helping in relation to coronavirus. It can be used to increase the accuracy of thermal imagers being used to measure human skin temperat...
The Fluke Calibration 700HPPK Pneumatic Test Pump Kit generates and adjusts pneumatic pressures up to 21 MPa (3000 psi), without requiring a nitrogen bottle or other external pressure supply. It supplies pressure to devices under test (DUTs...
Carrying case Protective carrying case with belt loop, shoulder strap and large detachable pocket for test leads and accessories...
The International Recognized Calibration Standard for Salinometers The International Association for Physical Sciences of the Ocean (IAPSO) Standard Seawater manufactured by Ocean Scientific International (OSIL) is available in North Americ...
Additel's 260Ex is an intrinsically safe handheld multichannel reference recorder with 8 different channel configurations. Armed with Additel’s most versatile and capable handheld, technicians are now able to measure and collect data for pr...
The 4000 Series is aimed at laboratories, manufacturers and design facilities requiring a wide range of outputs with accuracies up to 8ppm. The 4000 Series builds on the trusted reliability of the 3000A series, offering an updated user inte...
The new Additel 959A Hydraulic Pressure Test Pump is a benchtop pressure pump designed to generate pressure to 40,000 psi (2,800 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the han...
-327x226.jpeg)
Isotech have a wide range of Dry Blocks to suit probes requiring a large immersion depth. These products feature large and deep calibration volumes. As such they are less portable than the earlier Dry Blocks, but have higher capacities and ...
HygroPalm HP-GTS Measuring device for paper industry - Humidity and Temperature Measurement
The HP-GTS from Rotronic is a tried-and-tested instrument for measurement of equilibrium relative humidity and temperature in stacks of paper and c...
Isotech have a wide range of Dry Blocks to suit probes requiring a large immersion depth. These products feature large and deep calibration volumes. As such they are less portable than the earlier Dry Blocks, but have higher capacities and ...
The XB32A OEM transmitter consists of a cable probe and PCB without housing. Thanks to its compact size, high accuracy and various selection
possibilities, the transmitter can be adapted to customer wishes and used practically everywhere...
The S8000 precision hygrometer provides a direct measurement of dew point, temperature and pressure. Suitable for both industrial and laboratory applications, the instrument is compact and self-contained.
Dew-point measurement is based on ...
The S4000 TRS measures very dry dew points down to -100 °C (-148 °F) with ±0.1 °C accuracy. It features excellent stability and reproducibility across its entire measurement range and is used in calibration and standards laboratories worldw...
BHGE is the foremost supplier of air data test systems, with over 25 years experience in the design and manufacture of advanced pressure measuring instruments and sensors. The ADTS 405 is a series of reliable, high accuracy, air data test s...
SMF® – SonicMasterFlow®
Highly precise flow measurement of gases and air
The SMF® – SonicMasterFlow® series are calibration systems for high-precision flow measurement of air and other gases (optional) (volume and mass flows) using cr...
-327x226.jpeg)
The ADT914A Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 375psi (25bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up...
A wall mounted oxygen analyzer in a NEMA enclosure, suitable for indoor or outdoor. This single channel oxygen monitor is supplied with a stainless steel O2 sensor housing for trace oxygen gas analysis in safe as well as hazardous areas whe...
Suitable for trace oxygen measurements from 0.1 ppm through to purity applications at 100% oxygen, these rugged portable instruments share the same advanced sensor technology as the online process oxygen analyzers ensuring confidence in the...
This adapter mounts directly to the test port of the calibrator and allows for the calibration of two instruments at the same time, or the connection of a reference test instrument. Maximum working pressure is 10,000 psi (700 bar)...
