-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: ADT100
Brief specifications
Pneumatic filter: from -1 to 70 bar
Hydraulic filter: from -1 to 700 bar
The filtration resolution of the pneumatic filter is 0.04 mm
The filtering capacity of the hydraulic filter is 0.07 mm
Ease of maintenance
The possibility of choosing a connection thread
More details
The Additel 100-FLT-1K is a pneumatic filter and liquid trap covering from -15 to 1,000 psi (-1.0 to 70 bar). This filter is ideal for your pneumatic measurement or calibration applications and contains an easy to use drain valve for removing dirt, moisture or contaminates. For hydraulic applications, the Additel 100-FLT-10K, hydraulic filter can be used up to 10K psi (700 bar). With a filter resolution of 0.07 mm contaminants or debris are captured in the filter which is easy to clean and maintain. Each filter is configured with a variety of pressure connections designed to meet the most common applications.
Additel 100 Filter
- Pneumatic filter: from -1 to 70 bar
- Hydraulic filter: from -1 to 700 bar
- Filtering resolution <0.04 mm
- Ease of maintenance
- Selection of connection thread
/attachments/ADT_DS/HosesAdaptersAndFittings.pdf
Featured Products
-327x226.jpg)
-327x226.jpg)
The Druck DPI 705E Series of handheld pressure manometers and optional temperature indicators combine tough and rugged design with accurate and reliable measurements.
Compact and robust, the DPI 705E Series is designed for single-handed op...
Promet EExd Process Moisture Analyzers are hazardous-area rated industrial hygrometer systems for measurement of water vapor content in process gases on natural gas platforms and terminals as well as in petrochemical plants and industrial m...
The industry leading 3200B series provides by far the fastest and safest solution for calibration of Loop, RCD, PAT's and insulation testers. By using the 3200B series, calibration time can be drastically reduced, while superior accuracy me...
The PV411A is a high-quality field proven pressure and vacuum hand pump providing functionality, which has never been seen before in a handheld pressure source.
This remarkable product replaces four conventional hand pumps and offers the...
The 3130 Portable Pneumatic Pressure Calibrator is ideal for calibrating pressure transmitters, transducers, gauges and similar devices. The 3130 contains everything you need to generate, control and measure pressure, as well as read the ou...
The 3000RS is a modern precision resistance standard offering annual stabilities of better than 5ppm without the requirement for an oil bath, with temperature co-efficients as low as 0.1ppm/°C Using ultra-high precision, 4 wire hermetically...
A full specification on-line hygrometer for the measurement of dew point in air and process gases, with wide operating range and multiple display options...
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets.
Hazardous area use 1 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...
The GPR-7500 analyzer utilizes the low-power electro-chemical sensor technology to provide a cost-effective and easy to maintain online-installation hydrogen sulfide measurement in a small package. The GPR-7100 is a portable H2S analyzer ve...
Our range of oxygen analyzers are designed to monitor gas produced or used in industrial processes where trace oxygen from low parts per million to pure O2 must be precisely measured. Utilizing AII’s high performance galvanic oxygen sensors...
The 8270A measures and controls pressures from vacuum to 44 MPa (6400 psi). It can be configured with ranges as low as 100 kPa (15 psi).
Fluke Calibration’s unique control technology enables you to use these calibrators at low or high pres...
These instruments are used for checking pressure measuring instruments against master test gauges, indicators or transducers. These hydraulic pressure comparators provide a quick and easy solution for checking pressure measuring instruments...
-327x226.jpeg)
Water Proof Cased Large Capacity – up to 200 junctions Suitable for Power Station Use The Hotbox is housed in a robust waterproof enclosure to IP66 incorporating bottom gland plate. Fixing lugs for wall mounting are provided. Easy access to...
The Intrinsically Safe Field Display is a 4-digit loop-powered local monitor for the Easidew PRO I.S. and Easidew I.S. transmitters. It is certified with ATEX, IECEx, and FM and housed in an IP66 enclosure with a terminal compartment for wi...
Naturally ventilated shields are used where the natural ventilation (wind) suffices, e.g. measurement stations in the mountains...
ProCal-Track provides tools for the management of instruments from goods inwards through to despatch and all points in between. ProCal-Track can be used independently of ProCal, or can be integrated for full laboratory automation. Ease of u...
The PC52 series offers a comprehensive range of relative humidity probes for accurate, stable and repeatable measurements. Available with analogue output signals, the PC series can be installed in a wide variety of applications...
The HygroFlex3 series is ideal for all applications where good accuracy measurement of humidity and temperature is of critical importance. The transmitters can be used in a wide range of industries...
A set of test point adaptors to connect the tool less quick fit PV62XG, MC620G and the extension hoses to the device under test...
