-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
-1000x1000.jpg "ADT925 Hydraulic Pressure Test Pump")
-1000x1000.jpg "ADT925 Hydraulic Pressure Test Pump")
-1000x1000.jpg "ADT925 Hydraulic Pressure Test Pump")
-1000x1000.jpg "ADT925 Hydraulic Pressure Test Pump")
-1000x1000.jpg "ADT925 Hydraulic Pressure Test Pump")
Код: ADT925
Brief specifications
Pressure generation range -0.85..400 bar
Adjustment step - 1 mbar
Hand-tight Quick Connectors
Minimal maintenance
Great Stability
Media - Oil or Water(-W)
Carrying Case (optional)
More details
The 925 Hydraulic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 85% vacuum to 6,000psi (400bar). With the patented screw press technology, the high pressure can be easily generated, as well as increased and decreased smoothly. With no check valve (non-returning valve), the 925 avoids the troublesome leakage issues that is usually experienced with most hand pumps and allows for minimal maintenance. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches.
The 925 is an ideal comparison test pump for calibrating pressure measuring instruments such as test gauges, indicators or transducers in the field or laboratory.
ADT925 Hydraulic Pressure Test Pump
- Pressure generation range -0.85..400 bar
- Adjustment step - 1 mbar
- Hand-tight Quick Connectors
- Media - Oil or Water
- Minimal maintenance
/attachments/ADT_DS/ADT925DataSheetENG.pdf
Featured Products
HygroPalm HP31
Ideal handheld instrument for humidity and temperature measurement in simple applications. The integrated Hygromer IN-1 sensor guarantees accurate measuring results.
HygroPalm - HP32 - Versatile Handheld Instrument...
-327x226.jpeg)
Operating principles The problem: Temperature measurement is one of the most demanding applications of resistance measurement. It requires the measurement of resistance ratios to accuracies of 0.1ppm or better. While dc resistance standards...
The ES20 Compact Sampling System is designed to reliably and accurately measure dew point or moisture content in a wide variety of industrial gas applications up to 20 barg. This sampling system is an economical and high-quality solution wi...
Designed with low cost, portability and ease of use in mind, the 2080 provides on or off site verification of RCD testers, Loop testers, Continuity and Insulation testers and multifunction testers. The 2080 is simple to use and provides the...
THE 6535 RESISTANCE MEASUREMENT SYSTEM IS THE MOST TECHNOLOGICALLY ADVANCED, HIGHLY MODULAR AND EASIEST TO USE HIGH RESISTANCE SYSTEM AVAILABLE ON THE MARKET TODAY PRODUCT FEATURES Two Modes of Operation, Bridge Mode and Direct Measurement ...
The Working Standard WS 2x20 is a single-phase (WS 2120) and three-phase (WS 2320) precision reference meter for electrical power and energy measurement, dedicated to on-site meters testing. The device can be used also as hand-held unit for...
-327x226.jpg)
-327x226.jpg)
The Druck PV211 Pneumatic Hand Pump is a lightweight, high quality combined pressure and vacuum hand pump. It has been designed to provide maximum pneumatic pressures efficiently and effortlessly.
The PV211 can be used as a portable Pres...
The CRP5 clean-room panel is the obvious choice wherever a high degree of cleanliness is vital, in addition to precise measurement of differential pressure, humidity, and temperature. The CRP5 is used particularly in clean-rooms in hospital...
Second only to the Water Triple Point and in many ways, because of its ease of use and purity, superior to it, is the Gallium Melt Point. At 29.7646°C this is a very convenient temperature. Total Confidence Confidence is a major requirement...
The 8370A measures and controls pressures from atmosphere to 107 MPa. It can be configured with ranges as low as 700 kPa.
Fluke Calibration’s unique control technology enables you to use these calibrators at low or high pressures, all in t...
-327x226.jpeg)
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories ar...
A protective carrying case with shoulder strap and large pocket for accessories. Also accommodates the assembled system including the DPI620G and PM620...
The next generation pressure sensor
One Sensor. No Compromises.
Discover ADROIT6200 - the first release of ADROIT6000 industrial pressure sensors family.
ADROIT6200 is a high performance, robust pressure measurement device. It combin...
IDOS to USB converter Allows connection of an IDOS universal pressure module to the DPI620G. P/N IO620-USB-PC is also required to connect the converter to the DPI620G USB port. (not compatible with DPI620G-IS)...
The Fluke Calibration 700HPPK Pneumatic Test Pump Kit generates and adjusts pneumatic pressures up to 21 MPa (3000 psi), without requiring a nitrogen bottle or other external pressure supply. It supplies pressure to devices under test (DUTs...
On-site calibration is becoming an ever more important part of many calibration laboratories workloads. So why perform this calibration any differently from in the laboratory? ProSite software allows the user to take their instrument databa...
GUILDLINE INSTRUMENTS 9334A SERIES of Resistance Standards are designed as very stable laboratory standards for high accuracy resistance calibration in air, without the need for a temperature controlled bath. PRODUCT FEATURES 12 Month Stabi...
A set for connecting measuring equipment with each other using silicone tubes (fittings, silicone tubes and adapters).
X = connection type, eg N - 1/4 NPT male, N2 - 1/2 NPT male, B - 1/4 BSP male, B2 - 1/2 BSP male, M - M20X1.5 male...
Transmilles ProCal software provides a cost effective and easy to use solution for automating calibration, from a single workstation through to a network multi discipline network. ProCal comes pre loaded with drivers for many common instrum...
Fluke P5540 Metric Adapter Set:
Includes adapters: M14x1.5, M20x1.5, 1/8" BSP, and 1/4" BSP female.
Designed for use with Fluke P5500 series hydraulic and pneumatic comparison test pumps, excluding P5514B.
Fluke P5541 BSP Adapter Set:
...
