-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: DPI610
Brief specifications
More details
The DPI 610 Aeronautical version is a low cost yet flexible portable calibrator for precision leak testing of aircraft pitot static systems. Configured as a single channel unit for testing either altitude or airspeed parameters, it is fully self-contained with manual pressure generation and venting facilities. Scaling is provided in aeronautical units and the instrument also includes switch tests and other functions. The pneumatics enable a maximum rate of climb of 6,000 ft/min when used with a 5m length x 6mm bore hose at altitudes below 15,000ft. An AN4 pressure fitting is provided and an integral vent valve for restoring ambient ground pressure conditions.
Документация
DPI610 Aeronautical Portable Aircraft Leak Tester
- Altitude and Airspeed leak testing
- Altitude and Airspeed switch testing
- Integral pressure/vacuum pump
- Accuracy to 14ft and 0.7kts
- Large, task oriented display
Featured Products
DISCONTINUED. RECOMMENDED REPLACEMENT ADT680A
We designed the 680 series digital pressure gauges with two main objectives in mind. First, to provide an affordable digital gauge to replace mechanical gauges. If you’re looking to move from...
-327x226.jpg)
The 901A Low Pressure Test Pump is a hand operated pressure pump designed to generate pressures from -6 psi (-0.4 bar) to 6 psi (0.4 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up...
Rotronic BL-1D (humidity, temperature, pressure and dewpoint), HL-1D (humidity and temperature), TL-1D (temperature) data logger...
The 4000 Series is aimed at laboratories, manufacturers and design facilities requiring a wide range of outputs with accuracies up to 8ppm. The 4000 Series builds on the trusted reliability of the 3000A series, offering an updated user inte...
Heat Pipe Furnaces Isotech metrology furnaces have more than 35 years of proven use and are widely used by the worlds’ leading NMIs. For the optimal use of fixed point cells the temperature uniformity should be less than 10mK over the lengt...
-327x226.jpeg)
The function of this reference unit differs from other rack mounted systems in that the temperature of the metal block in which the thermocouple and copper leads are inserted actually varies with ambient temperature. A separate output signa...
Suitable for trace oxygen measurements from 0.1 ppm through to purity applications at 100% oxygen, these rugged portable instruments share the same advanced sensor technology as the online process oxygen analyzers ensuring confidence in the...
The next generation Advanced Quartz Crystal Microbalance analyzer from Michell Instruments is designed to provide reliable, fast and accurate measurement of trace moisture content in a variety of applications where keeping moisture to a min...
IDOS (Intelligent Digital Output Sensor) are smart, Universal Pressure Modules that are interchangeable between any IDOS compatible Druck instruments. They are truly “Plug and Play” modules in that they do not require calibration or set-up ...
The piston gauge’s fundamental operating principle and excellent long term stability have made it an indispensable tool in high accuracy pressure metrology. As accuracy levels increase, quality assurance requirements intensify and automatio...
The ADTS554F air data test set is a portable four-channel flightline pitot static tester. In three-channel mode, it provides pitot static air data validation, leak testing, fault-finding and avionics instrumentation testing for any aircraft...
Additel ACal (9530) is a powerful software package designed for varying degrees of automation of calibrations and management of your laboratory. ACal combines pressure and temperature instrument calibration automation features with laborato...
4610M DC VOLTAGE 0 - ±1025V DC CURRENT 0 - 30A AC VOLTAGE 2mV - 1000V, 10Hz - 1MHz AC CURRENT 20uA - 30A, 10Hz - 30kHz RESISTANCE (PASSIVE) 0 Ohms - 1 GOhm CAPACITANCE (PASSIVE) 1nF - 10uF FREQUENCY 10Hz - 1MHz TEMPERATURE (THERMOCOUPLE) J ...
The Isotech Model ITL-M-17725 apparatus is a self-contained, mechanically-refrigerated, system with a main well to house one mercury cell and two auxiliary wells for pre-chilling of thermometers. The cryostat temperature is adjustable from ...
The Easidew PRO XP moisture transmitter is an explosion-proof dew-point transmitter for trace moisture measurements in gases or liquids in hazardous areas. It is certified by ATEX, CQPSUS, IECEx, and GOST for use in any North American, Euro...
PM200 Pressure Measurement Modules
Key features:
- 0.02% FS specification makes it ideal for calibrating or testing pressure dial gauges, lower accuracy transmitters, or pressure switches.
- Rugged silicon pressure sensor design allo...
-327x226.jpeg)
The most accurately defined temperatures are those defining points (fixed points) of ITS-90. The leading Primary Laboratories use large fixed point cells in deep calibration furnaces that utilise heat pipes to eliminate temperature gradient...
The 3000A Series multiproduct calibrators have been designed to help you and your business, allowing a wide range of calibration work to be performed quickly, accurately and economically. Modern calibration is a competitive market, and cost...
-327x226.jpeg)
Isotech Ultra Pure-Metal Freezing Point Cells are designed specifically to realize the liquid-solid equilibrium temperatures of certain high-purity metal elements, for calibration of thermometers at the ITS-90 Fixed Points. When you purchas...
The Pegasus R is a compact furnace for calibrating radiation pyrometers. The temperature of the furnace is set on a controller, whilst an independent indicator, whose sensor fits into the cavity, indicates the actual radiance temperature. T...
