-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: PDCR/PTX1800
Brief specifications
More details
The PDCR1800 transducer (mV output) and the PTX 1800 transmitter (4 to 20 mA output) are the latest generation of fully submersible titanium high-performance sensors for the measurement of hydrostatic liquid levels. The 1800 Series incorporates many enhanced features gained from experience in supplying thousands of sensors for small- and large-scale installations worldwide. Example applications include: Potable water - From groundwater borehole to surface water level measurements in rivers, canals, and reservoirs. Wastewater and remediation - Monitoring of secondary and outflow sewage levels and contaminated groundwater levels in landfill sites. Tank Level - From land-based liquid storage vessels to on-board ship ballast tank monitoring. Sea Water - Marine environmental applications, including tide gauging, coastal flood protection, and wave profiling, amongst others.
PDCR/PTX1800 Series Submersible Pressure Transducers
- Ranges from 0.75 mH2O to 600 mH2O
- Accuracy ±0.10% full scale (FS) best straight line (BSL)
- Fully welded 17.5 mm diameter titanium construction
- Polyurethane and hydrocarbon resistant cables
- Full range of installation accessories
Featured Products
Naturally ventilated shields are used where the natural ventilation (wind) suffices, e.g. measurement stations in the mountains...
The Model 2465 Gas Piston Gauge has a long history of serving national standards laboratories, commercial industry and government organizations as a primary pressure standard for over 40 years. Since its original introduction, enhancements ...
-327x226.jpeg)
Primary Standard cells fit into the Medusa and Oberon, covering from Indium to Copper Points. These cylindrical cells are 42mm diameter and have a cavity 9mm diameter x 87mm deep. The Medium Temperature “Hockey Puck” cells are 64mm diameter...
Guildline Instruments 6623A-PCS Series of DC Precision High Current Systems introduces new patented designs to provide the best uncertainties of any DC high current sources (i.e. typically < 5 ppm at 1000 A) and the best in modularity. *Ple...
Hydrocarbon dew point (HCDP) and moisture are key quality parameters to ensure the quality of pipeline transmission gas. With the combined Condumax II and OptiPEAK TDL600 analyzer system pipeline operators have the assurance of the most wid...
As industry increasingly moves to high precision instrumentation there is an increasing need to utilise very high performance test and service equipment. Model 006-A is a laboratory accuracy six decade resistance box with a total resistance...
-327x226.jpg)
Isotech’s Quick Cal range of testers are ideally suited to the less exacting applications where our larger, better specified baths are unnecessary. The Low Temperature Quick Cal covers the temperature range of -12°C to +140°C, making it ide...
With AwTherm, Rotronic offers a professional, high-end laboratory unit for temperature-stabilized measurement of water activity. The wide control range permits measurements to be integrated directly in the tempered manufacturing or storage ...
-327x226.jpeg)
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes t...
This pneumatic comparison pressure comparator is designed for testing pressure measuring instruments against master test instruments.
This cost effective instrument provides precise control for important calibration requirements and includ...
-327x226.jpeg)
The milliK Precision Thermometer from Isotech sets a new standard for the high accuracy measurement and calibration of Platinum Resistance Thermometers, Thermistors, Thermocouple and Process Instrumentation (4-20mA) over the range -270°C to...
The HC2A series are digital humidity-temperature probes based on the AirChip3000 technology. These probes
feature a UART serial interface and two 0…1 V linear analog output signals.
The HC2A probes are designed for use with the HygroClip2...
The HygroSmart HS3 an advanced, digital probe with measured or calculated outputs and a rugged 10 bar pressure rated housing, designed to provide reliable humidity measurement for process control in a wide range of applications. The HS3 pro...
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories ar...
The new Additel 960 Hydraulic Pressure Test Pump is a benchtop pressure pump designed to generate pressure to 60,000 psi (4,200 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the hand...
-327x226.jpg)
The PV210 is a lightweight, yet rugged and durable, low pressure and vacuum hand pump offering exceptional fine control. Thermally insulated to eliminate hand held temperature effects and supplied with a built-in pressure relief valve to pr...
The MC620 module carrier attaches to the head of the DPI620 to provide two independent pressure measurement channels. These can be fitted with any PM620 pressure module from 25 mbar to 1,000 bar (10 inH2O to 15,000 psi). A simple screw fit ...
Additel's 260Ex is an intrinsically safe handheld multichannel reference recorder with 8 different channel configurations. Armed with Additel’s most versatile and capable handheld, technicians are now able to measure and collect data for pr...
GUILDLINE Instruments 6530 TeraOhm Bridge-Meter Series is the latest innovation in High Resistance and Ultra-High Resistance Measurements. These Bridge-Meters incorporate the latest technology for high resistance measurements providing Metr...
Isotech has produced over 200 high temperature thermometers which have been sold world-wide for use up to the silver point. As a consequence of our predelivery testing alone we have probably made more silver point calibrations than anyone e...
