Каталог
Назад

Tek Know Ukraine

Solution for metrology

With us expertly :)

Isotech Model 96178 HTSPRT

- 0°C to 1000°C

- This high-temperature thermometer is a significant contribution to better high-temperature calibration.

- Unique Aspirated Design

- High Stability

- Ultra High Purity Quartz

Brief specifications


More details

Isotech has produced over 200 high temperature thermometers which have been sold world-wide for use up to the silver point. As a consequence of our predelivery testing alone we have probably made more silver point calibrations than anyone else in the world. No one fully appreciates all the mechanisms at work when a coil of pure platinum wire inside a quartz envelope is taken to 1000°C and back. However, endless hours of study at National and International level, plus our own significant work at Isotech, have enabled us to design, build and test a superior Silver-Point Thermometer. This, we feel, is a significant contribution to better high temperature calibration. First, the 96178 can breathe, a valve in the handle can be opened to allow oxygen depletion or moist air to escape from inside the sheath and be replaced by fresh air containing 20% oxygen. The valve is normally opened at elevated temperatures and closed to prevent moisture ingress before water triple point measurements are performed. Second, the 96178 is the only thermometer ever designed with platinum heat radiation shields built into the sheath, to prevent heat radiating up inside the sheath. Third, a new ultra pure quartz, developed for the semiconductor industry at a cost of between 20 and 30 million pounds, has been adopted for use in the construction of the 96178. This new thermometer exemplifies our commitment to achieve the highest possible quality and minimum of contamination. How the thermometer is handled is most important for its stability and a purchaser will receive a comprehensive manual and tutorial with each 96178. Under some circumstances, provided the interior of the thermometer is undamaged we can replace the outer quartz sheath. Please consult us if a replacement is required. To exploit fully the accuracy of the 96178, a user will need a furnace for warming and annealing the thermometer as well as one to house the silver-point/aluminum-point cells. A Dual Calibration Furnace from Isotech combines these two features together with all the special accessories and handling know-how we have discovered.


ВимірюванняГенерація (Імітація)


Isotech Model 96178 HTSPRT

- 0°C to 1000°C

- This high-temperature thermometer is a significant contribution to better high-temperature calibration.

- Unique Aspirated Design

- High Stability

- Ultra High Purity Quartz

Featured Products

RPD Reference gas meters
RPD Reference gas meters The gold standard for low flow measurement The rotary piston gas meters GM16 meet the highest demands on the reliable and precise reference measurement of low flow up to 0.01 m³/h. You achieve an excellent mea...
Код: RPD-R
Large Volume Liquid Bath Model 820
Large Volume Liquid Bath Model 820
If you have a large number of sensors to calibrate then this economically priced stirred liquid bath is the solution. The 820 bath has been introduced to provide a liquid calibration bath with a large volume. This is to allow the bath to be...
5.0000/5 1text_less_review
Код: 820
Standard Thermocouple Model 1600
Standard Thermocouple Model 1600
The Isothermal range of Thermocouple Standards are the result of many years development. The type R and S standards will cover the range from 0°C to 1600°C. The measuring assembly comprises a 7mm x 300mm or 600mm gas tight 99.7% recrystalli...
Код: 1600
ADT960 Hydraulic Pressure Test Pump
ADT960 Hydraulic Pressure Test Pump
The new Additel 960 Hydraulic Pressure Test Pump is a benchtop pressure pump designed to generate pressure to 60,000 psi (4,200 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the hand...
Код: ADT960
2468A Pitot/Static Primary Standard
2468A Pitot/Static Primary Standard
The Model 2468 Pitot Static Primary Standard is specifically designed for calibrating today’s high performance flight line and Air Data Test Systems. With the new autofloat controller, operator intervention is reduced to simply applying the...
Код: 2468A
Software Package ELMA
Software Package ELMA
Software Package ELMA is dedicated for electricity meter testing and calibration. The package contains routines for control of hardware, data acquisition, evaluation of measurements, meter data exchange, output of documents, data archiving,...
Код: ELMA
Additel 282 Dual-Channel Reference Thermometer Readout
Additel 282 Dual-Channel Reference Thermometer Readout
Additel’s 282 Reference Thermometer Readout delivers the best possible accuracies and features in the palm of your hand With accuracy capabilities on par with laboratory grade thermometers, the ADT282 is capable of handling even your most c...
Код: ADT282
Data logger for humidity, temperature, pressure and dewpoint HL-1D / BL-1D / TL-1D
Data logger for humidity, temperature, pressure and dewpoint HL-1D / BL-1D / TL-1D
Rotronic BL-1D (humidity, temperature, pressure and dewpoint), HL-1D (humidity and temperature), TL-1D (temperature) data logger...
Код: HL-1D/BL-1D/TL-1D
Europa 4520
Europa 4520
Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories ar...
Код: 4520
8270A High-Pressure Controller
8270A High-Pressure Controller
The 8270A measures and controls pressures from vacuum to 44 MPa (6400 psi). It can be configured with ranges as low as 100 kPa (15 psi). Fluke Calibration’s unique control technology enables you to use these calibrators at low or high pres...
Код: 8270A
Parallel Tube Liquid Bath Libra Model 785M
Parallel Tube Liquid Bath Libra Model 785M
Isotech calibration baths employ sophisticated designs to ensure calibration to the smallest of uncertainties. In 1986 Isotech purchased the interests of H N Irving & Sons Temperature division which had specialised in providing high quality...
Код: 785M
Differential Pressure Transmitter - Rotronic PF4/5
Differential Pressure Transmitter - Rotronic PF4/5
Measuring and Monitoring differential Pressure in Clean Rooms, Food and Pharma. Choice of two different sensor technologies (thermal measuring method and diaphragm sensor) The new differential pressure transmitters PF4 and PF5 with two dif...
Код: PF4/5
P5523 Liquid-to-Gas Media Separator
For high pressure pneumatic calibrations this unit interfaces with hydraulic deadweight testers providing a rateless liquid-to gas separation. Driven by a pneumatic pressure source (nitrogen bottle) and controlled by needle valves, high pre...
Код: P5523
TRUrac Model 847
TRUrac Model 847
Thermocouple Reference System The TRUrac is a 0°C or elevated temperature thermocouple reference system mounted in a 19” chassis. It has been developed for situations where ambient temperature can be up to 65°C. The reference temperature is...
Код: 847
Additel 875 Dry Well Calibrator
Additel 875 Dry Well Calibrator
If you are serious about portable temperature calibration tools, then you know a good dry well calibrator is more than just a stable heat source. The Additel 875 Series Dry Well Calibrators combine excellent performance in stability, radial...
Код: ADT875-350
3000CS precision curent shunts precision references and standards
The 3000CS provides a precision set of current shunts for current ranges from 10mA through to 10A to provide additional ranges for multimeters that either lack sufficient accuracy at required currents, or lack the required current ranges en...
4.5000/5 14text_more_review
Код: 3000CS
7223CT-2S Series of Precision AC Current Transformers
7223CT-2S Series of Precision AC Current Transformers
Guildline Instruments NEW 7223CT-2S Series of Precision AC Current Transformers provides very accurate AC current measurements at high current and for high voltages. The 7223CT-2S is part of the 7223CT Series which are Commercially Availabl...
Код: 7223CT-2S
DPI104 Digital Pressure Gauge
DPI104 Digital Pressure Gauge
The DPI104 is a microprocessor-controlled digital pressure gauge that combines precision and functionality in a compact, robust, and simple-to-use package. The DPI 04 matches advanced silicon sensor technology with several convenient design...
Код: DPI104
Dew-Point Transmitter - SF52
Dew-Point Transmitter - SF52
The SF52 dew-point transmitter is a simple, cost effective moisture sensor designed for use in harsh industrial dryer applications. It is reliable and tough enough to withstand the high temperatures often associated with industrial drying. ...
Код: SF52
7330 Series of Oil Based Resistance Standards
7330 Series of Oil Based Resistance Standards
Guildline Instruments 7330 Series of Oil Based Resistance Standards are designed for high accuracy resistance calibration in oil (Fluid Baths) or in air. PRODUCT FEATURES Typical AC/DC Error ...
Код: 7330
Спасибо!