-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
-1000x1000.jpg "ADT920, ADT920HV Pneumatic Pressure Test Pump")
-1000x1000.jpg "ADT920, ADT920HV Pneumatic Pressure Test Pump")
-1000x1000.jpg "ADT920, ADT920HV Pneumatic Pressure Test Pump")
Код: ADT920
Brief specifications
Pressure generation range -0.95..200 bar
Adjustment step - 0.1 mbar
Hand-tight Quick Connectors
Minimal maintenance
Great Stability
Media - Air
Carrying Case (optional)
More details
The 920 and 920HV High Pressure Test Pumps are hand operated pressure pumps designed to generate pressure from 95% vacuum to 3,000psi (200bar). With a long lever, it just takes 40 seconds to reach 3,000 psi (200 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. The residual liquid in the pump introduced from devices under test will be pushed out and collected during pressure release. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches.
The 920 and 920HV are ideal comparison test pumps for pressure instrument calibrations.
ADT920, ADT920HV Pneumatic Pressure Test Pump
- Pressure generation range -0.95..200 bar
- Adjustment step - 0.1 mbar
- Hand-tight Quick Connectors
- Great Stability
- Minimal maintenance
/attachments/ADT_DS/ADT920_920HVDataSheetENG.pdf
Featured Products
Additel’s 680P Series Digital Pressure Gauges are designed to be used in panel mount applications. With features such as data logging (optional) and Bluetooth technology included, you will find these gauges to be high in value at a reasonab...
The DT722 is a rugged industrial relative humidity and temperature transmitter designed for process applications where accurate, stable measurement and control of humidity and temperature is required...
-327x226.jpeg)
The Oberon R uses a Sodium heat Pipe to ensure an exceptionally low temperature gradient along the furnace core. It is ideal for the realization of Aluminium, Silver or Copper ITS-90 Fixed Points. It may be used as a blackbody source over t...
-327x226.jpg)
Isotech’s Quick Cal range of testers are ideally suited to the less exacting applications where our larger, better specified baths are unnecessary. The Low Temperature Quick Cal covers the temperature range of -12°C to +140°C, making it ide...
The Medusa R Blackbody Calibration Source allows for calibration of noncontact infrared thermometers over the temperature range 30°C to 550°C. It is suitable for use as a radiation source for infrared thermometers. The cavity is 45 x 285mm ...
Heat Pipe Furnaces Isotech metrology furnaces have more than 35 years of proven use and are widely used by the worlds’ leading NMIs. For the optimal use of fixed point cells the temperature uniformity should be less than 10mK over the lengt...
-327x226.jpeg)
The Water Triple Point is the most important fixed point, the only point common to the ITS-90 and the Thermodynamic Temperature Scale. It is an essential reference point for every temperature laboratory. The Jarrett-Isotech cells are the be...
With advanced microprocessor technology and state-of-the-art silicon pressure sensors, Additel’s 158Ex series Digital Pressure Modules provide an accurate, reliable, and economic solution for wide range of pressure applications. Our intrins...
Since 1995 Isotech have been producing various designs of special Au/Pt, Pt/Pd, Pd/Au thermocouples for researchers. From our experience we can now offer the most popular of these, the Pt/Au thermocouple in a standard form. All wires are 99...
GPR-1200 MS-2 (ATEX)
Designed for spot-checking ultra-high purity gases, the
GPR-1200 MS-2 has a range of 0-1 ppm and LDL of 5 ppb
O2 – the lowest oxygen measurements available with a
portable instrument. ATEX-approved version available...
-327x226.jpeg)
The most accurately defined temperatures are those defining points (fixed points) of ITS-90. The leading Primary Laboratories use large fixed point cells in deep calibration furnaces that utilise heat pipes to eliminate temperature gradient...
4Sight2 Calibration software is a web-based calibration management tool that helps you maintain and control your calibration environment to the highest metrology standards. 4Sight2 from Druck, a Baker Hughes business, offers easy-to-use, co...
The industry leading 3200B series provides by far the fastest and safest solution for calibration of Loop, RCD, PAT's and insulation testers. By using the 3200B series, calibration time can be drastically reduced, while superior accuracy me...
PRTCalc is a free utility for those involved with PT100 platinum resistance thermometers. It allows for the accurate conversion of resistance to temperature or temperature to resistance. PRTCalc conforms with IEC 751 Amendment 2: December 1...
The next generation TDLAS Analyzer for automatic online measurement of moisture in variable compositions of natural gas and biomethane. The OptiPEAK TDL600 Tuneable Diode Laser Analyzer employs the latest techniques in laser absorption spec...
The HygroFlex1 series is the latest development in inexpensive HVAC transmitters for relative humidity and temperature. The devices are equipped
with the tried-and-tested Rotronic Hygromer® IN-1 sensor and boast unbeatable value for money....
PPC4 is a stand-alone pressure controller intended for precision setting and control of gas pressure into a closed volume as is commonly needed for the calibration and testing of pressure measuring instruments. It has been designed to provi...
Guildline Instruments GL 1050 Series of Resistance Transfer Standards are designed as very high stability calibration laboratory transfer standards for customers looking to replace the old ESI SR1050 Series. PRODUCT FEATURES Very High Quali...
The PC52 series offers a comprehensive range of relative humidity probes for accurate, stable and repeatable measurements. Available with analogue output signals, the PC series can be installed in a wide variety of applications...
The CRP5 clean-room panel is the obvious choice wherever a high degree of cleanliness is vital, in addition to precise measurement of differential pressure, humidity, and temperature. The CRP5 is used particularly in clean-rooms in hospital...
