-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: HC2A
Brief specifications
More details
Filter carriers protect the humidity and temperature sensors and probes against mechanical damage. Filters act as a protective barrier against contaminants/pollutants that can influence the sensor. When choosing the correct combination of filter carrier and filter there are many factors to consider. Specific conditions such as high air velocities, pollutants in the air, disinfection and cleaning routines, mechanical impacts, high bioactivity, condensation, airborne chemical contaminants and required response time are some of the many considerations.
Filters and Filter Carriers for Rotronic HC2A Humidity Probes
-Steel 1.4301, Sintered steel, Polycarbonate filter carrier
Polyethylene filter: 40-50µm, -50…100 °C; 20µm, -50…100 °C; 40µm, -50…100 °C
wire mesh filter: 10µm, -50…100 °C; 10µ, -100…200 °C; 20…25µm, -100…200 °C
Sintered steel filter: 25µm, -100…200 °C; 25µm, -100…200 °C
Teflon filter: 10µm, -80…200 °C
Featured Products
The XTP601 Oxygen Analyzer for safe or hazardous areas is a robust, linear and stable device that is used for measurements in gases such as biogas, methane, hydrogen, nitrogen or carbon dioxide. The analyzer meets the requirements of IEC615...
Probes are suitable for use with all Isotech thermocouple reference units or may be used with any other equipment including ice flasks and ice point reference units. They can be supplied to suit a single thermocouple, or up to ten double ju...
The piston gauge’s fundamental operating principle and excellent long term stability have made it an indispensable tool in high accuracy pressure metrology. As accuracy levels increase, quality assurance requirements intensify and automatio...
Heat Pipe Furnaces Isotech metrology furnaces have more than 35 years of proven use and are widely used by the worlds’ leading NMIs. For the optimal use of fixed point cells the temperature uniformity should be less than 10mK over the lengt...
Eventually all resistance thermometry refers back to one or more fixed resistors. These are a key element in any laboratory which measures temperature. The resistors need to be very stable with time, temperature and transportation, and they...
Transportable hydrocarbon dew-point analyzer system for field-measurements in natural gas. Suitable for IEC Zone 1 or 2 hazardous area, NEC Class I, Division 1 Groups B, C, D.
A complete transportable natural gas dew-point analysis system ...
-327x226.jpg)
Comparator adaptor Allows the PV62XG pressure station to be used as a comparator. The adaptor connects to the stations pressure port and provides two outlet ports for making gauge comparisons. Compatible with the test point adaptors supplie...
THE 6664C LOW THERMAL QUAD CHANNEL SCANNERS ENABLES SOFTWARE CONTROLLED, FULLY AUTOMATED NORMAL AND HIGH OHM MEASUREMENTS WITH VOLTAGES UP TO 1000 V PRODUCT FEATURES Withstands up to 1000 Vdc to provide fully automated resistance measuremen...
4610M DC VOLTAGE 0 - ±1025V DC CURRENT 0 - 30A AC VOLTAGE 2mV - 1000V, 10Hz - 1MHz AC CURRENT 20uA - 30A, 10Hz - 30kHz RESISTANCE (PASSIVE) 0 Ohms - 1 GOhm CAPACITANCE (PASSIVE) 1nF - 10uF FREQUENCY 10Hz - 1MHz TEMPERATURE (THERMOCOUPLE) J ...
Moisture analyzers are only as reliable as the sample extraction, handling and conditioning techniques used. The ES70 Sampling System range offers a set of configuration options to cover all process moisture and dew-point application needs,...
THE 9336 OR 9337 SERIES OF PRECISION RESISTANCE STANDARDS ARE EXCELLENT SOLUTIONS AS HIGH TO ULTRA HIGH LABORATORY RESISTANCE STANDARDS OR FOR PORTABLE APPLICATIONS REQUIRING HIGH ACCURACY WITH RESISTANCE VALUES FROM 10 MΩ TO 10 PΩ. PRODUCT...
A set of test point adaptors to connect the tool less quick fit PV62XG, MC620G and the extension hoses to the device under test...
The Fluke Calibration 700HPPK Pneumatic Test Pump Kit generates and adjusts pneumatic pressures up to 21 MPa (3000 psi), without requiring a nitrogen bottle or other external pressure supply. It supplies pressure to devices under test (DUTs...
-327x226.jpeg)
The ADT914A Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 375psi (25bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up...
The Fluke Model P5551 Pointer Remover/Punch is a specialized tool designed to efficiently remove and accurately refit the pointer of a pressure gauge. It is particularly useful for maintenance and calibration tasks involving pressure measur...
CDP301 portable HCDP tester uses the chilled mirror principle for both hydrocarbon and water dew point measurements and is designed to follow the requirements as described in ASTM D1142. Based on the visual manual method of observing the fo...
Guildline Instruments 6623A-PCS Series of DC Precision High Current Systems introduces new patented designs to provide the best uncertainties of any DC high current sources (i.e. typically < 5 ppm at 1000 A) and the best in modularity. *Ple...
Success in motorsport depends on hundreds of components working together under extreme conditions, and Baker Hughes continues to develop Druck pressure transducers that give the ultimate performance. Druck motorsport sensors have become a w...
The 3000CS provides a precision set of current shunts for current ranges from 10mA through to 10A to provide additional ranges for multimeters that either lack sufficient accuracy at required currents, or lack the required current ranges en...
